Observations of Sunspot Oscillations in G band and Ca II H line with Solar Optical Telescope on Hinode

Exploiting high-resolution observations made by the Solar Optical Telescope onboard Hinode, we investigate the spatial distribution of power spectral density of oscillatory signal in and around NOAA active region 10935. The G-band data show that in the umbra the oscillatory power is suppressed in all frequency ranges. On the other hand, in Ca II H intensity maps oscillations in the umbra, so-called umbral flashes, are clearly seen with the power peaking around 5.5 mHz. The Ca II H power distribution shows the enhanced elements with the spatial scale of the umbral flashes over most of the umbra but there is a region with suppressed power at the center of the umbra. The origin and property of this node-like feature remain unexplained.Comment: 7 pages, 8 figures, accepted for publication in PASJ (Hinode Special Issue

Initial Helioseismic Observations by Hinode/SOT

Results from initial helioseismic observations by Solar Optical Telescope onboard Hinode are reported. It has been demonstrated that intensity oscillation data from Broadband Filter Imager can be used for various helioseismic analyses. The k-omega power spectra, as well as corresponding time-distance cross-correlation function that promises high-resolution time-distance analysis below 6-Mm travelling distance, were obtained for G-band and CaII-H data. Subsurface supergranular patterns have been observed from our first time-distance analysis. The results show that the solar oscillation spectrum is extended to much higher frequencies and wavenumbers, and the time-distance diagram is extended to much shorter travel distances and times than they were observed before, thus revealing great potential for high-resolution helioseismic observations from Hinode.Comment: 6 pages, accepted for publication in PAS

The biocompatibility of titanium in a buffer solution: compared effects of a thin film of TiO2 deposited by MOCVD and of collagen deposited from a gel

This study aims at evaluating the biocompatibility of titanium surfaces modified according two different ways: (i) deposition of a bio-inert, thin film of rutile TiO2 by chemical vapour deposition (MOCVD), and (ii) biochemical treatment with collagen gel, in order to obtain a bio-interactive coating. Behind the comparison is the idea that either the bio-inert or the bio-active coating has specific advantages when applied to implant treatment, such as the low price of the collagen treatment for instance. The stability in buffer solution was evaluated by open circuit potential (OCP) for medium time and cyclic voltametry. The OCP stabilized after 5104 min for all the specimens except the collagen treated sample which presented a stable OCP from the first minutes. MOCVD treated samples stabilized to more electropositive values. Numeric results were statistically analysed to obtain the regression equations for long time predictable evolution. The corrosion parameters determined from cyclic curves revealed that the MOCVD treatment is an efficient way to improve corrosion resistance. Human dermal fibroblasts were selected for cell culture tests, taking into account that these cells are present in all bio-interfaces, being the main cellular type of connective tissue. The cells grew on either type of surface without phenotype modification. From the reduction of yellow, water-soluble 3-(4,5-dimethyldiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT cytotoxicity test), MOCVD treated samples offer better viability than mechanically polished Ti and collagen treated samples as well. Cell spreading, as evaluated from microscope images processed by the program Sigma Scan, showed also enhancement upon surface modification. Depending on the experimental conditions, MOCVD deposited TiO2 exhibits different nanostructures that may influence biological behaviour. The results demonstrate the capacity of integration in simulated physiologic liquids for an implant pretreated by either method

Adaptabilidade e estabilidade de cultivares de soja em cinco épocas de plantio no Cerrado de Rondônia.

Este trabalho teve o objetivo de avaliar o desempenho, a estabilidade e a adaptabilidade de 21 cultivares de soja (Glycine max (L.) Merrill), em cinco épocas de plantio no cerrado de Rondônia. O delineamento experimental foi blocos ao acaso, com três repetições. Os ensaios foram conduzidos no ano de 1996/97 pelo Centro de Pesquisa Agroflorestal de Rondônia, no Campo Experimental de Vilhena em Rondônia, RO. Os métodos utilizados apresentaram concordância entre os resultados alcançados, sendo que o comportamento das cultivares nas diferentes épocas de semeadura pode ser representado por um modelo linear. O coeficiente de resposta linear b1i não apresentou diferença significativa (P<0,05) da unidade pelo teste t (b1i = 1) em todas as cultivares testadas. As cultivares que apresentaram desvios de regressão s2(di) significativos (P<0,05) foram MT/BR-50 e EMBRAPA 31, com R2 = 58,56% e 74,43%, respectivamente. As demais cultivares não apresentaram desvios de regressão significativos

Proposta de classificação dos coeficientes de variação em relação à produtividade e altura da planta de soja.

O objetivo deste trabalho foi definir classificações de coeficientes de variação para produtividade e altura da planta de soja. Os dados foram obtidos de ensaios intermediários e finais realizados nos estados do Paraná e do Mato Grosso. Foram realizadas classificações distintas para cada localização e ciclo reprodutivo. Considerando-se a média e o desvio-padrão dos coeficientes de variação obtidos das análises de variância dos ensaios, os coeficientes foram classificados como baixo, médio, alto e muito alto. Uma classificação adicional foi feita utilizando a mediana e o pseudo-sigma, em substituição à média e ao desvio-padrão, respectivamente. A classificação dos coeficientes de variação dependeu do caráter e da localização, mas não variou muito em razão do ciclo reprodutivo. Os critérios adotados (média e desvio-padrão ou mediana e pseudo-sigma) foram semelhantes (independentemente da distribuição dos coeficientes de variação) e satisfatórios para determinar a precisão experimental. O limite máximo de coeficiente de variação aceitável para produtividade é de 16% e para altura da planta é de 12%

BRS Jiripoca: extensão de indicação para o estado de Rondônia.

Editores técnicos: Adilson de Oliveira Junior, Odilon Ferreira Saraiva, Regina Maria Villas Bôas de Campo Leite, César de Castro, Jussara Flores de Oliveira Arbues, Wellington Cavalcanti

Characterization of H5N1 influenza viruses isolated from humans in vitro

Since December 1997, highly pathogenic avian influenza A H5N1viruses have swept through poultry populations across Asian countries and been transmitted into African and European countries. We characterized 6 avian influenza H5N1 viruses isolated from humans in 2004 in Thailand. A highly pathogenic (HP) KAN353 strain showed faster replication and higher virulence in embryonated eggs compared to other strains, especially compared to the low pathogenic (LP) SP83 strain. HP KAN353 also showed strong cytopathogenicity compared to SP83 in Madin-Darby canine kidney cells. Interestingly, LP SP83 induced smaller plaques compared to other strains, especially HP KAN353. PB2 amino acid 627E may contribute to low virulence, whereas either PB2 amino acid 627 K or the combination of 627E/701N seems to be associated with high virulence. The in vitro assays used in this study may provide the basis for assessing the pathogenesis of influenza H5N1 viruses in vivo

Fatal Cases of Influenza A(H3N2) in Children: Insights from Whole Genome Sequence Analysis

During the Northern Hemisphere winter of 2003–2004 the emergence of a novel influenza antigenic variant, A/Fujian/411/2002-like(H3N2), was associated with an unusually high number of fatalities in children. Seventeen fatal cases in the UK were laboratory confirmed for Fujian/411-like viruses. To look for phylogenetic patterns and genetic markers that might be associated with increased virulence, sequencing and phylogenetic analysis of the whole genomes of 63 viruses isolated from fatal cases and non fatal “control” cases was undertaken. The analysis revealed the circulation of two main genetic groups, I and II, both of which contained viruses from fatal cases. No associated amino acid substitutions could be linked with an exclusive or higher occurrence in fatal cases. The Fujian/411-like viruses in genetic groups I and II completely displaced other A(H3N2) viruses, but they disappeared after 2004. This study shows that two A(H3N2) virus genotypes circulated exclusively during the winter of 2003–2004 in the UK and caused an unusually high number of deaths in children. Host factors related to immune state and differences in genetic background between patients may also play important roles in determining the outcome of an influenza infection

Wear and corrosion interactions on titanium in oral environment : literature review

The oral cavity is a complex environment where corrosive substances from dietary, human saliva, and oral biofilms may accumulate in retentive areas of dental implant systems and prostheses promoting corrosion at their surfaces. Additionally, during mastication, micromovements may occur between prosthetic joints causing a relative motion between contacting surfaces, leading to wear. Both processes (wear and corrosion) result in a bio-tribocorrosion system once that occurs in contact with biological tissues and fluids. This review paper is focused on the aspects related to the corrosion and wear behavior of titanium-based structures in the oral environment. Furthermore, the clinical relevance of the oral environment is focused on the harmful effect that acidic substances and biofilms, formed in human saliva, may have on titanium surfaces. In fact, a progressive degradation of titanium by wear and corrosion (tribocorrosion) mechanisms can take place affecting the performance of titanium-based implant and prostheses. Also, the formation of wear debris and metallic ions due to the tribocorrosion phenomena can become toxic for human tissues. This review gathers knowledge from areas like materials sciences, microbiology, and dentistry contributing to a better understanding of bio-tribocorrosion processes in the oral environment.(undefined