5,513 research outputs found
Double transverse spin asymmetry in the Drell-Yan process from Sivers functions
We show that the transverse double spin asymmetry (DSA) in the Drell-Yan
process contributed only from the Sivers functions can be picked out by the
weighting function
.
The asymmetry is proportional to the product of two Sivers functions from each
hadron . Using two sets of Sivers
functions extracted from the semi-inclusive deeply elastic scattering data at
HERMES, we estimate this asymmetry in the
Drell-Yan process which is possible to be performed in HESR at GSI. The
prediction of DSA in the Drell-Yan process contributed by the function
g_{1T}(x,\Vec k_T^2), which can be extracted by the weighting function
,
is also given at GSI.Comment: 6 latex pages, 2 figures, to appear in PR
MgB2 radio-frequency superconducting quantum interference device prepared by atomic force microscope lithography
A new method of preparation of radio-frequency superconducting quantum
interference devices on MgB2 thin films is presented. The variable-thickness
bridge was prepared by a combination of optical lithography and of the
scratching by an atomic force microscope. The critical current of the
nanobridge was 0.35 uA at 4.2 K. Non-contact measurements of the current-phase
characteristics and of the critical current vs. temperature have been
investigated on our structures.Comment: RevTeX4. Accepted in Appl. Phys. Let
Performance of the EUDET-type beam telescopes
Test beam measurements at the test beam facilities of DESY have been
conducted to characterise the performance of the EUDET-type beam telescopes
originally developed within the EUDET project. The beam telescopes are equipped
with six sensor planes using MIMOSA26 monolithic active pixel devices. A
programmable Trigger Logic Unit provides trigger logic and time stamp
information on particle passage. Both data acquisition framework and offline
reconstruction software packages are available. User devices are easily
integrable into the data acquisition framework via predefined interfaces.
The biased residual distribution is studied as a function of the beam energy,
plane spacing and sensor threshold. Its standard deviation at the two centre
pixel planes using all six planes for tracking in a 6\,GeV
electron/positron-beam is measured to be
(2.88\,\pm\,0.08)\,\upmu\meter.Iterative track fits using the formalism of
General Broken Lines are performed to estimate the intrinsic resolution of the
individual pixel planes. The mean intrinsic resolution over the six sensors
used is found to be (3.24\,\pm\,0.09)\,\upmu\meter.With a 5\,GeV
electron/positron beam, the track resolution halfway between the two inner
pixel planes using an equidistant plane spacing of 20\,mm is estimated to
(1.83\,\pm\,0.03)\,\upmu\meter assuming the measured intrinsic resolution.
Towards lower beam energies the track resolution deteriorates due to increasing
multiple scattering. Threshold studies show an optimal working point of the
MIMOSA26 sensors at a sensor threshold of between five and six times their RMS
noise. Measurements at different plane spacings are used to calibrate the
amount of multiple scattering in the material traversed and allow for
corrections to the predicted angular scattering for electron beams
Transverse momentum dependent distribution functions in a covariant parton model approach with quark orbital motion
Transverse parton momentum dependent distribution functions (TMDs) of the
nucleon are studied in a covariant model, which describes the intrinsic motion
of partons in terms of a covariant momentum distribution. The consistency of
the approach is demonstrated, and model relations among TMDs are studied. As a
byproduct it is shown how the approach allows to formulate the non-relativistic
limit.Comment: 16 page
Development of ultra-light pixelated ladders for an ILC vertex detector
The development of ultra-light pixelated ladders is motivated by the
requirements of the ILD vertex detector at ILC. This paper summarizes three
projects related to system integration. The PLUME project tackles the issue of
assembling double-sided ladders. The SERWIETE project deals with a more
innovative concept and consists in making single-sided unsupported ladders
embedded in an extra thin plastic enveloppe. AIDA, the last project, aims at
building a framework reproducing the experimental running conditions where sets
of ladders could be tested
photoluminescence of a single quantum emitter in a strongly inhomogeneous chemical environment
A comprehensive photoluminescence study of defect centers in single SiO2 nanoparticles provides new insight into the complex photo-physics of single quantum emitters embedded into a random chemical environment
Absolute quantum yield measurements of fluorescent proteins using a plasmonic nanocavity
One of the key photophysical properties of fluorescent proteins that is most difficult to measure is the quantum yield. It describes how efficiently a fluorophore converts absorbed light into fluorescence. Its measurement using conventional methods become particularly problematic when it is unknown how many of the proposedly fluorescent molecules of a sample are indeed fluorescent (for example due to incomplete maturation, or the presence of photophysical dark states). Here, we use a plasmonic nanocavity-based method to measure absolute quantum yield values of commonly used fluorescent proteins. The method is calibration-free, does not require knowledge about maturation or potential dark states, and works on minute amounts of sample. The insensitivity of the nanocavity-based method to the presence of non-luminescent species allowed us to measure precisely the quantum yield of photo-switchable proteins in their on-state and to analyze the origin of the residual fluorescence of protein ensembles switched to the dark state
Tissue engineering of small caliber vascular grafts
Objective: Previous tissue engineering approaches to create small caliber vascular grafts have been limited by the structural and mechanical immaturity of the constructs. This study uses a novel in vitro pulse duplicator system providing a ‘biomimetic' environment during tissue formation to yield more mature, implantable vascular grafts. Methods: Vascular grafts (I.D. 0.5 cm) were fabricated from novel bioabsorbable polymers (polyglycolic-acid/poly-4-hydroxybutyrate) and sequentially seeded with ovine vascular myofibroblasts and endothelial cells. After 4 days static culture, the grafts (n=24) were grown in vitro in a pulse duplicator system (bioreactor) for 4, 7, 14, 21, and 28 days. Controls (n=24) were grown in static culture conditions. Analysis of the neo-tissue included histology, scanning electron microscopy (SEM), and biochemical assays (DNA for cell content, 5-hydroxyproline for collagen). Mechanical testing was performed measuring the burst pressure and the suture retention strength. Results: Histology showed viable, dense tissue in all samples. SEM demonstrated confluent smooth inner surfaces of the grafts exposed to pulsatile flow after 14 days. Biochemical analysis revealed a continuous increase of cell mass and collagen to 21 days compared to significantly lower values in the static controls. The mechanical properties of the pulsed vascular grafts comprised supra-physiological burst strength and suture retention strength appropriate for surgical implantation. Conclusions: This study demonstrates the feasibility of tissue engineering of viable, surgically implantable small caliber vascular grafts and the important effect of a ‘biomimetic' in vitro environment on tissue maturation and extracellular matrix formatio
Are there approximate relations among transverse momentum dependent distribution functions?
Certain exact relations among transverse momentum dependent parton
distribution functions due to QCD equations of motion turn into approximate
ones upon the neglect of pure twist-3 terms. On the basis of available data
from HERMES we test the practical usefulness of one such
``Wandzura-Wilczek-type approximation'', namely of that connecting
h_{1L}^{\perp(1)a}(x) to h_L^a(x), and discuss how it can be further tested by
future CLAS and COMPASS data.Comment: 9 pages, 3 figure
Sivers effect in Drell Yan at RHIC
On the basis of a fit to the Sivers effect in deep-inelastic scattering, we
make predictions for single-spin asymmetries in the Drell-Yan process at RHIC.Comment: 10 pages, 7 figures, 1 table. v2: References and comments added,
minor correction
- …