34,484 research outputs found
Festschrift Pedro Campa In Nocte Consilium. Studies in Emblematics in Honor of Pedro F. Campa. Edited by John T. Cull and Peter M. Daly. (SAECVLA SPIRITALIA 46) Baden-Baden: Verlag Valentin Koerner, 2011. 516 pp., 77 illustrations.
Constraints on neutrino decay lifetime using long-baseline charged and neutral current data
We investigate the status of a scenario involving oscillations and decay for
charged and neutral current data from the MINOS and T2K experiments. We first
present an analysis of charged current neutrino and anti-neutrino data from
MINOS in the framework of oscillation with decay and obtain a best fit for
non-zero decay parameter . The MINOS charged and neutral current data
analysis results in the best fit for ~eV, and zero decay parameter, which
corresponds to the limit for standard oscillations. Our combined MINOS and T2K
analysis reports a constraint at the 90\% confidence level for the neutrino
decay lifetime ~s/eV. This is the best limit
based only on accelerator produced neutrinos
Accuracy of a DTM derived from full-waveform laser scanning data under unstructured eucalypt forest: a case study
A Digital Terrain Model (DTM) is fundamental for extracting several forest canopy structure metrics from data acquired with small-footprint airborne laser scanning (ALS). This modern remote sensing technology is based on laser measurements from a laser system mounted on an aircraft and integrated with a geodetic GNSS receiver and an inertial measurement unit (IMU) or inertia navigation system (INS). In the context of a research project for deriving forest inventory parameters and fuel variables under eucalypt stands in Mediterranean climates, the vertical precision of the DTM obtained by automatic filtering of full-waveform ALS data had to be evaluated. The DTM accuracy estimation on a study area with peculiar characteristics, which are often avoided in related studies, will also allow verifying the performance of full- waveform ALS systems. The accuracy estimation is carried out in a novel way. By novel way, it is meant an exhaustive, well-planned collection of reliable control data in forest environment. The collection of the control data involves the production of DTM on 43 circular plots (radius = 11.28m) using total stations and geodetic GNSS receivers. These DTM, with a total of 3356 points, allowed one to evaluate consistently and reliably the vertical accuracy of the terrain surface produced with ALS under a eucalypt forest. This global accuracy, expressed by the Root Mean Square Error (RMSE) of the vertical differences between the field surveyed surface and the ALS derived DTM surface is 0.15m (mean=0.08m and std=0.09m). This impressive value indicates that, for an ALS point cloud density of 10pts/m2 and footprint of 20 cm, the methodology used to extract the DTM from full- waveform ALS data under an unstructured eucalypt forest is very accurate. In this article it is addressed both the strategy adopted to collect the control data and the quality assessment of the DTM produced by means of the ALS data
Classical Integrable N=1 and Super Sinh-Gordon Models with Jump Defects
The structure of integrable field theories in the presence of jump defects is
discussed in terms of boundary functions under the Lagrangian formalism.
Explicit examples of bosonic and fermionic theories are considered. In
particular, the boundary functions for the N=1 and N=2 super sinh-Gordon models
are constructed and shown to generate the Backlund transformations for its
soliton solutions. As a new and interesting example, a solution with an
incoming boson and an outgoing fermion for the N=1 case is presented. The
resulting integrable models are shown to be invariant under supersymmetric
transformation.Comment: talk presented at the V International Symposium on Quantum Theory and
Symmetries, Valladolid, Spain, July 22-28,200
Effect of the Resolution and Accuracy of DTM produced with Aerial Photogrammetry and Terrestrial Laser Scanning on Slope- and Catchment-scale Erosion Assessment in a Recently Burnt Forest Area: a Case Study
Wildfires are a common phenomenon in Portugal, affecting on average 100.000 ha of rural areas per year and up to 400.000 ha in dramatic years like 2003 and 2005. Wildfires can strongly enhance the hydrological response and associated sediment losses in recently burnt forest catchments and, thereby, negatively affect land-use sustain- ability of the affected terrains as well as ecosystem functioning of downstream aquatic habitats. Therefore, the EROSFIRE-I and –II projects aim at developing a GIS-tool for predicting soil erosion hazard following wildfire and, ultimately, for assessing the implications of alternative post-fire land management practices.
Assessment of runoff and soil erosion rates critically depends on accurate estimates of the corresponding runoff areas. In the case of catchments as well as unbounded erosion plots (arguably, the only practical solution for slope-scale measurements), delineation of runoff area requires a Digital Terrain Model (DTM) with an adequate resolution and accuracy. The DTM that was available for the Colmeal study area, localized in the mountain range of Lousã, in the central part of Portugal, of EROSFIRE-II project is that of the 1:25.000 topographic map produced by the Military Geographic Institute. Since the Colmeal area involves a rather small experimental catchment of roughly 10 ha and relatively short study slopes of less than 100 m long, two different data acquisition techniques were used to produce high-resolution and high-accuracy DTM. One of the data acquisition techniques is aerial photogrammetry whilst the other is terrestrial laser scanning. In order to produce a DTM by photogrammetric means, a dedicated digital aerial photography mission was carried out. The images have a pixel size of 10 cm. Manual measurements permitted to measure breaklines and were complemented by automatic measurements. In this way, a DTM in a TIN format was produced. This was further converted to grid format using the ArcGIS software system. Signalized control points allowed obtaining the DTM in the same global reference system as that employed for terrestrial laser scanning. The terrestrial laser scanning was done using a Riegl LMS Z360I, stationed in 8 points within the area to provide a complete coverage. The resulting dense cloud of points was filtered – by the company carrying out the scanning mission - to remove the non-terrain points (in particular vegetation). Several grids of different sizes were produced (0.10 x 0.10, 0.20 x 0.20, 0.50 x 0.50, 1 x 1 and 2 x 2 m2).
This work will study the effect on runoff and erosion rates at the slope- and catchment-scale of DTM with differ- ent resolution, but produced with data collected with the same acquisition technique, and of DTM with the same resolution, but produced with data collected with the two different acquisition techniques. The study is being carried out in ArcGIS using DTM in a grid format. Preliminary results suggest that the conver- sion of TIN-to-grid in ArcGIS produces results that depend on the procedure being applied. Therefore, the different algorithms available at ArcGIS for TIN-to-grid conversion are currently being tested, using an artificially produced DTM. This testing includes various interpolation techniques for grid generation, and will be extended to different algorithms for computation of drainage flow direction
The Conserved Charges and Integrability of the Conformal Affine Toda Models
We construct infinite sets of local conserved charges for the conformal
affine Toda model. The technique involves the abelianization of the
two-dimensional gauge potentials satisfying the zero-curvature form of the
equations of motion. We find two infinite sets of chiral charges and apart from
two lowest spin charges all the remaining ones do not possess chiral densities.
Charges of different chiralities Poisson commute among themselves. We discuss
the algebraic properties of these charges and use the fundamental Poisson
bracket relation to show that the charges conserved in time are in involution.
Connections to other Toda models are established by taking particular limits.Comment: 18 pages, LaTeX, (one appendix and one reference added, small changes
in introduction and conclusions, eqs.(5.14) and (5.19) improved, final
version to appear in Int. J. Modern Phys. A
- …