425 research outputs found
Attenuation of seismic shear wave energy in Switzerland
Modelling the attenuation of shear wave energy is an important component of seismic hazard analysis. Previous studies have shown how attenuation, particularly in the uppermost layers of the crust, is regionally dependent. The impact of this is that the decay of energy radiating from an earthquake will vary from place to place. To quantify the regional attenuation in Switzerland we model the Fourier spectral amplitude of small-to-moderate earthquakes, recorded on the local seismic networks. High-frequency decay is parametrized by Q and Îş, while apparent geometrical spreading models account for the frequency-independent decay of energy. We analyse ground motion encompassing the significant duration of shaking to provide models that are useful for the purpose of seismic hazard analysis. Two methods are used to estimate the whole path attenuation parameter, t*: first, a simultaneous fit of the source model and attenuation effects across the entire spectral bandwidth for earthquakes with M > 2; and secondly, a linear fit of an attenuation model to the high-frequency part of the spectrum for earthquakes with M > 3.5. The t* parameter is found to vary with hypocentral distance consistent with a weakly attenuating crust and strongly attenuating uppermost layer. 1-D tomographic inversions indicate a profile of increasing Q with depth down to the Moho. Frequency-independent decay is parametrized using a three-part model which allows for the inclusion of Moho reflection phases in the spectrum in the range of 20-140 km in the Swiss Foreland and from 70 to 140 km in the Swiss Alp
A theoretical investigation of average H/V ratios
The mode summation method and a finite difference technique are applied to investigate the spectral ratio between the horizontal and vertical components (H/V ratio) of ambient vibrations and to explore the variation of the resonance frequency and the amplitude and shape of polarization as a function of the structure and the source positions. Layered structural models are used by assuming a large number of sources distributed around a receiver, with shallow source depths that are randomly assigned. We identify stable parts of the H/V ratios that are independent of the source distance and are dominated by the ellipticity of the fundamental-mode Rayleigh wave in the frequency band between the fundamental frequency of resonance of the unconsolidated sediments and the first minimum of the average H/V ratio. The ellipticity in this frequency band is determined by the layering of the sediments. The numerical simulations are compared with observations at a site where the thickness and velocity structure of the unconsolidated sediments are known from S-wave and surface wave measurements. Two methods are applied to compute the H/V ratio, the classical method in the frequency domain and a method based on frequency-time analysis that allows us to locate P-SV wavelets in the time-series. The main problem in comparing synthetics with observations is the contribution of SH waves in the observed H/V ratios. We propose a method to minimize these effects and the effects of the superposition of different incoming P-SV waves. An inversion scheme is applied to the stable parts of the observed H/V ratio, based on a genetic algorithm, to retrieve the S-wave velocity structure from a single ambient vibration recor
Role of lateral mantle flow in the evolution of subduction systems: insights from laboratory experiments
We present 3-D laboratory experiments constructed to investigate the pattern of mantle flow around a subducting slab under different boundary conditions. In particular we present a set of experiments, characterized by different conditions imposed at the trailing edge of the subducting plate (that is, plate fixed in the far field, plate detached in the far field, imposed plate motion). Experiments have been performed using a silicone slab floating inside a honey tank to simulate a thin viscous lithosphere subducting in a viscous mantle. For each set, we show differences between models that do or do not include the possibility of out-of-plane lateral flow in the mantle by varying the lateral boundary conditions. Our results illustrate how a subducting slab vertically confined over a 660-km equivalent depth can be influenced in its geometry and in its kinematics by the presence or absence of possible lateral pathways. On the basis of these results we show implications for natural subduction systems and we highlight the importance of suitable simulations of lateral viscosity variations to obtain a realistic simulation of the history of subductio
Array measurements of S-wave velocities from ambient vibrations
The S-wave velocity is a very important factor in local hazard assessment. Direct measurement with conventional methods is very costly and therefore inexpensive and efficient methods are needed to make local hazard assessment more feasible. Techniques based on the analysis of recordings of ambient vibrations from small-scale arrays of sensors have become popular recently. One technique that is favoured by several research groups is the extraction of the dispersion curve by estimation of the f-k spectrum and its inversion for the S-wave velocity structure. This paper presents the results from an application based on high-resolution beamforming applied to the vertical component of the measurements. Synthetic ambient vibrations generated with a 2-D finite-difference code are used to illustrate and test the application. By superposition of random signals it is shown that the dispersion curve can be extracted even if 60 per cent of the wavefield consists of spatially uncorrelated signals. The errors in the phase velocities amount to less than 10 per cent. The dispersion curve can be extracted from the fundamental frequency of resonance upwards. Data from two real measurements are presented—from one site close to a city and another site within an industrial complex. The inverted S-wave velocity structures agree with reference data for the sites. The rule of thumb for the resolution of the method is confirme
Optimization of a large-scale microseismic monitoring network in northern Switzerland
We have developed a network optimization method for regional-scale microseismic monitoring networks and applied it to optimize the densification of the existing seismic network in northeastern Switzerland. The new network will build the backbone of a 10-yr study on the neotectonic activity of this area that will help to better constrain the seismic hazard imposed on nuclear power plants and waste repository sites. This task defined the requirements regarding location precision (0.5 km in epicentre and 2 km in source depth) and detection capability [magnitude of completeness Mc= 1.0 (ML)]. The goal of the optimization was to find the geometry and size of the network that met these requirements. Existing stations in Switzerland, Germany and Austria were considered in the optimization procedure. We based the optimization on the simulated annealing approach proposed by Hardt & Scherbaum, which aims to minimize the volume of the error ellipsoid of the linearized earthquake location problem (D-criterion). We have extended their algorithm to: calculate traveltimes of seismic body waves using a finite difference ray tracer and the 3-D velocity model of Switzerland, calculate seismic body-wave amplitudes at arbitrary stations assuming the Brune source model and using scaling and attenuation relations recently derived for Switzerland, and estimate the noise level at arbitrary locations within Switzerland using a first-order ambient seismic noise model based on 14 land-use classes defined by the EU-project CORINE and open GIS data. We calculated optimized geometries for networks with 10-35 added stations and tested the stability of the optimization result by repeated runs with changing initial conditions. Further, we estimated the attainable magnitude of completeness (Mc) for the different sized optimal networks using the Bayesian Magnitude of Completeness (BMC) method introduced by Mignan etal. The algorithm developed in this study is also applicable to smaller optimization problems, for example, small local monitoring networks. Possible applications are volcano monitoring, the surveillance of induced seismicity associated with geotechnical operations and many more. Our algorithm is especially useful to optimize networks in populated areas with heterogeneous noise conditions and if complex velocity structures or existing stations have to be considere
Palaeoseismicity studies on end-Pleistocene and Holocene lake deposits around Basle, Switzerland
Palaeoseismological investigations in the lakes of Seewen and Bergsee in the Basle region, Switzerland and southern Germany, revealed characteristic event horizons in an otherwise uniform background sedimentary record. Dated and correlated based on radiocarbon ages, palynostratigraphy and sedimentation rates, some of these event horizons show soft-sediment deformation features and fractures that can be interpretated as being the result of earthquake shaking. Two of the event horizons with clear indications for earthquake deformation were detected in both lakes, showing approximately the same age as indicated by radiocarbon dating. A third event horizon with fractures of apparent seismogenic origin, was detected at several drill sites in only one lake (Bergsee). Three further event horizons, two in the Bergsee and one in Lake Seewen, are of uncertain origin, though they show some characteristics that could well be caused by earthquakes. Based on the observations in both lakes, five events were detected of which three are most probably related to earthquakes which occurred between 180 BC-1160 BC, 8260 BC-9040 BC and 10 720 BC-11 200 BC, respectively. The Basle region is well known for the strongest historical earthquake north of the Alps, the AD 1356 Basle earthquake. Based on combined historical and palaeoseismological data, it has been inferred that earthquakes with size comparable to the AD 1356 Basle earthquake have occurred several times within the last 12 000 yr and that the recurrence time for such strong earthquakes are in the range of 1500-3000 y
Automatic regional moment tensor inversion in the European-Mediterranean region
We produce fast and automatic moment tensor solutions for all moderate to strong earthquakes in the European-Mediterranean region. The procedure automatically screens near real-time earthquake alerts provided by a large number of agencies. Each event with magnitude M ≥ 4.7 triggers an automatic request for near real-time data at several national and international data centres. Moment tensor inversion is performed using complete regional long-period (50-100 s) waveforms. Initially the data are inverted for a fixed depth to remove traces with a low signal-to-noise ratio. The remaining data are then inverted for several trial depths to find the best-fitting depth. Solutions are produced within 90 min of an earthquake. We analyse the results for the period 2000 April to 2002 April to evaluate the performance of the procedure. For quality assessment, we compared the results with the independent Swiss regional moment tensor catalogue (SRMT), and divided the 87 moment tensor solutions into three groups: 38 A-quality solutions with well-resolved Mw, depth and focal mechanism; 21 B-quality solutions with well-resolved Mw; and 28 unreliable C-quality solutions. The non-homogeneous station and event distributions, varying noise level, and inaccurate earthquake locations affected solution quality. For larger events (Mw ≥ 5.5) we consistently obtained A-quality solutions. For Mw = 4.5-5.5 we obtained A- and B-quality solutions. Solutions that pass empirical rules mimicking the a posteriori quality for our data set are automatically disseminate
The European Upper Mantle as Seen by Surface Waves
We derive a global, three-dimensional tomographic model of horizontally and vertically polarized shear velocities in the upper mantle. The model is based on a recently updated global database of Love- and Rayleigh-wave fundamental-mode phase-anomaly observations, with a good global coverage and a particularly dense coverage over Europe and the Mediterranean basin (broadband stations from the Swiss and German seismic networks). The model parameterization is accordingly finer within this region than over the rest of the globe. The large-scale, global structure of our model is very well correlated with that of earlier shear-velocity tomography models, based both on body- and surface-wave observations. At the regional scale, within the region of interest, correlation is complicated by the different resolution limits associated to different databases (surface waves, compressional waves, shear waves), and, accordingly, to different models; while a certain agreement appears to exist for what concerns the grand tectonic features in the area, heterogeneities of smaller scale are less robustly determined. Our new model is only one step towards the identification of a consensus model of European/Mediterranean upper-mantle structure: on the basis of the findings discussed here, we expect that important improvements will soon result from the combination, in new tomographic inversions, of fundamental-mode phase-anomaly data like ours with observations of surface-wave overtones, of body-wave travel times, of ambient "noise”, and by accounting for an a-priori model of crustal structure more highly resolved than the one employed her
The use of Rayleigh-wave ellipticity for site-specific hazard assessment and microzonation: application to the city of Lucerne, Switzerland
The sediments underlying the city of Lucerne (Switzerland) consisting of fluvio-lacustrine deposits of Quaternary age have the potential to produce strong amplification of the seismic wavefield. To obtain a reliable estimation of the deep soil structure, we combine different methodologies based on ambient noise recordings, such as single station horizontal to vertical ratios and three-component array analysis. Two novel techniques to estimate Rayleigh-wave ellipticity from ambient noise recordings are tested. These are based on a single- and a multistation approach, respectively. The first utilizes the continuous wavelet transform to perform a decomposition of the noise wavefield and to isolate and extract the Rayleigh-wave contribution. The second, conversely, relies on a high-resolution f-k method to achieve the same result. We compare the results from the two techniques to provide an evaluation of their capabilities and limitations. A two-step inversion scheme is then presented to improve resolution on the bedrock depth. In particular, the surface wave dispersion information is initially used to constrain the soft sediment part, while the Rayleigh-wave ellipticity peak is subsequently used for constraining the bedrock depth. It is shown that such an approach is beneficial to map the bedrock geometry over dense urban areas. The output velocity model is then used to compute the local seismic amplification by means of gridded 1-D approximatio
- …