Immediate performance of self-etching versus system adhesives with multiple light-activated restoratives

Objectives: The purpose of this study was to evaluate the performance of both single and double applications of (Adper Prompt L-Pop) self-etching dental adhesive, when used with three classes of light-activated restorative materials, in comparison to the performance of each restorative system adhesive. Evaluation parameters to be considered for the adhesive systems were (a) immediate marginal adaptation (or gap formation) in tooth cavities, (b) free setting shrinkage-strain determined by the immediate marginal gap-width in a non-bonding Teflon cavity, and (c) their immediate shear bond-strengths to enamel and to dentin. Methods: The maximum marginal gap-width and the opposing-width (if any) in the tooth cavities and in the Teflon cavities were measured immediately (3 min) after light-activation. The shear bond-strengths to enamel and to dentin were also measured at 3 min. Results: For light-activated restorative materials during early setting (&#60;3 min), application of Adper Prompt L-Pop exhibited generally superior marginal adaptation to most system adhesives. But there was no additional benefit from double application. The marginal-gaps in tooth cavities and the marginal-gaps in Teflon cavities were highly correlated (r=0.86–0.89, p&#60;0.02–0.01). For enamel and dentin shear bond-strengths, there were no significant differences between single and double applications, for all materials tested except Toughwell and Z 250 with enamel. Significance: Single application of a self-etch adhesive was a feasible and beneficial alternative to system adhesives for several classes of restorative. Marginal gap-widths in tooth cavities correlated more strongly with free shrinkage-strain magnitudes than with bond-strengths to tooth structure.</p

Combining economic and social goals in the design of production systems by using ergonomics standards

In designing of production systems, economic and social goals can be combined, if ergonomics is integrated into the design process. More than 50 years of ergonomics research and practice have resulted in a large number of ergonomics standards for designing physical and organizational work environments. This paper gives an overview of the 174 international ISO and European CEN standards in this field, and discusses their applicability in design processes. The available standards include general recommendations for integrating ergonomics into the design process, as well as specific requirements for manual handling, mental load, task design, human-computer-interaction, noise, heat, body measurements, and other topics. The standards can be used in different phases of the design process: allocation of system functions between humans and machines, design of the work organization, work tasks and jobs, design of work environment, design of work equipment, hardware and software, and design of workspace and workstation. The paper is meant to inform engineers and managers involved in the design of production systems about the existence of a large number of ISO and CEN standards on ergonomics, which can be used to optimize human well-being and overall system performance.review;standard;standardization;ergonomics;CEN;ISO;human factors;production engineering;production planning

The clinical value of Bausch and Lomb kalichrome and Corning CPF 550 tinted lenses to patients with cataracts: Four cases

Tinted lenses have been used in different ways for many years. One application of tinted lenses has been therapeutically to patients with cataracts. In this study, four cataract patients, screened to meet a number of restricting criteria, participated. In an initial examination, acuity, contrast sensitivity, and color vision were tested under habitual conditions, then with a Bausch and Lomb Kalichrome clip-on over the spectacles, and finally with a Corning CPF 550 clip-on over the spectacles. The patients then wore and evaluated each tint for a period of two weeks. Neither tint improved acuity or contrast sensitivity in the clinic. The CPF 550 worked well to relieve the subjective symptoms of two of the patients, while the Kalichrome tint worked quite well for the other two

Class I Gap-formation in Highly-viscous Glass-ionomer Restorations: Delayed vs Immediate Polishing

This in vitro study evaluated the effects of delayed versus immediate polishing to permit maturation of interfacial gap-formation around highly viscous conventional glass-ionomer cement (HV-GIC) in Class I restorations, together with determining the associated mechanical properties. Cavity preparations were made on the occlusal surfaces of premolars. Three HV-GICs (Fuji IX GP, GlasIonomer FX-II and Ketac Molar) and one conventional glass-ionomer cement (C-GIC, Fuji II, as a control) were studied, with specimen subgroups (n=10) for each property measured. After polishing, either immediately (six minutes) after setting or after 24 hours storage, the restored teeth were sectioned in a mesiodistal direction through the center of the model Class I restorations. The presence or absence of interfacial-gaps was measured at 1000× magnification at 14 points (each 0.5-mm apart) along the cavity restoration interface (n=10; total points measured per group = 140). Marginal gaps were similarly measured in Teflon molds as swelling data, together with shear-bond-strength to enamel and dentin, flexural strength and moduli. For three HV-GICs and one C-GIC, significant differences (p<0.05) in gap-incidence were observed between polishing immediately and after one-day storage. In the former case, 80–100 gaps were found. In the latter case, only 9–21 gaps were observed. For all materials, their shear-bond-strengths, flexural strength and moduli increased significantly after 24-hour storage.</p