3,439 research outputs found
Conversion from Engineering Units to Telemetry Counts on Dryden Flight Simulators
Dryden real-time flight simulators encompass the simulation of pulse code modulation (PCM) telemetry signals. This paper presents a new method whereby the calibration polynomial (from first to sixth order), representing the conversion from counts to engineering units (EU), is numerically inverted in real time. The result is less than one-count error for valid EU inputs. The Newton-Raphson method is used to numerically invert the polynomial. A reverse linear interpolation between the EU limits is used to obtain an initial value for the desired telemetry count. The method presented here is not new. What is new is how classical numerical techniques are optimized to take advantage of modem computer power to perform the desired calculations in real time. This technique makes the method simple to understand and implement. There are no interpolation tables to store in memory as in traditional methods. The NASA F-15 simulation converts and transmits over 1000 parameters at 80 times/sec. This paper presents algorithm development, FORTRAN code, and performance results
Structural studies of mesoporous ZrO-CeO and ZrO-CeO/SiO mixed oxides for catalytical applications
In this work the synthesis of ZrO-CeO and
ZrO-CeO/SiO were developed, based on the process to form
ordered mesoporous materials such as SBA-15 silica. The triblock copolymer
Pluronic P-123 was used as template, aiming to obtain crystalline single phase
walls and larger specific surface area, for future applications in catalysis.
SAXS and XRD results showed a relationship between ordered pores and the
material crystallization. 90% of CeO leaded to single phase homogeneous
ceria-zirconia solid solution of cubic fluorite structure (Fmm). The
SiO addition improved structural and textural properties as well as the
reduction behavior at lower temperatures, investigated by XANES measurements
under H atmosphere
A Biased Resistor Network Model for Electromigration Failure and Related Phenomena in Metallic Lines
Electromigration phenomena in metallic lines are studied by using a biased
resistor network model. The void formation induced by the electron wind is
simulated by a stochastic process of resistor breaking, while the growth of
mechanical stress inside the line is described by an antagonist process of
recovery of the broken resistors. The model accounts for the existence of
temperature gradients due to current crowding and Joule heating. Alloying
effects are also accounted for. Monte Carlo simulations allow the study within
a unified theoretical framework of a variety of relevant features related to
the electromigration. The predictions of the model are in excellent agreement
with the experiments and in particular with the degradation towards electrical
breakdown of stressed Al-Cu thin metallic lines. Detailed investigations refer
to the damage pattern, the distribution of the times to failure (TTFs), the
generalized Black's law, the time evolution of the resistance, including the
early-stage change due to alloying effects and the electromigration saturation
appearing at low current densities or for short line lengths. The dependence of
the TTFs on the length and width of the metallic line is also well reproduced.
Finally, the model successfully describes the resistance noise properties under
steady state conditions.Comment: 39 pages + 17 figure
Numerical study of a banded precipitation event over Italy
Satellite images of 30 October 2008 show the development
over north-central Italy of rainbands and multiple
waves during a strong south-westerly wind episode
associated with a deepening synoptic trough and
cold front passage.
The event was studied by means of the ISAC model chain constituted
of the hydrostatic model BOLAM and the nested non-hydrostatic model
MOLOCH at 1.1 km resolution.
Diagnostics of model output was performed to reveal the
physical origin of the dynamical features and precipitation
field as simulated.
Based on our results we propose a theoretical framework in
which symmetric instability underlies some of the observed
precipitation patterns
Numerical study of a banded precipitation event over Italy
Satellite images of 30 October 2008 show the development
over north-central Italy of rainbands and multiple
waves during a strong south-westerly wind episode
associated with a deepening synoptic trough and
cold front passage.
The event was studied by means of the ISAC model chain constituted
of the hydrostatic model BOLAM and the nested non-hydrostatic model
MOLOCH at 1.1 km resolution.
Diagnostics of model output was performed to reveal the
physical origin of the dynamical features and precipitation
field as simulated.
Based on our results we propose a theoretical framework in
which symmetric instability underlies some of the observed
precipitation patterns
Arthroscopic synovectomy in chronic inflammatory rheumatism: clinical and functional aspects
By now many authors regard arthroscopic synovectomy an integral part of therapeutic treatment of many rheumatic diseases with favourable results on post operating course and clinical picture in the long term. The pathologic synovial tissue during articular inflammatory rheumatism is well known to have a damaging effect responsible of early cartilage injury, as well as symptomatic action (e.g. articular stiffness, effusion, pain, functional limitation). Therefore to value the removal of such a tissue you should think of the secondary prevention of cartilage injury, besides the symptomatic point of view. Since 1996 we performed 190 arthroscopic synovectomy, the adopted criteria of judgement were: pain (spontaneous, during active and passive movements), effusion or swelling presence, articular range and cartilage state (evaluated during arthroscopy according to Outerbridg's classification). 70% of the cases showed good results and six years later the beginning of this activity we retain arthroscopic synovectomy as a valid help in articular inflammatory rheumatism treatment
Reliability and clinical usefulness of the personality inventory for DSM-5 in clinically referred adolescents. A preliminary report in a sample of Italian inpatients
Background The DSM-5 Alternative Model of Personality Disorders (AMPD) provides the opportunity to integrate the needed developmental perspective in the assessment of personality pathology. Based on this model, Krueger and colleagues (2012) developed the Personality Inventory for DSM-5 (PID-5), which operationalizes the proposed DSM-5 traits. Methods Eighty-five consecutively admitted Italian adolescent inpatients were administered the Italian translation of the PID-5, in order to obtain preliminary data on PID-5 reliability and clinical usefulness in clinically referred adolescents. Results With the possible exception of the PID-5 Suspiciousness scale, all other PID-5 scales evidenced adequate internal consistency reliability (i.e., Cronbach's α values of at least .70, most being greater than .80). Our data seemed to yield at least partial support for the construct validity of the PID-5 scales also in clinical adolescents, at least in terms of patterns of associations with dimensionally assessed DSM-5 Section II PDs that were also included in the DSM-5 AMPD (excluding Antisocial PD because of the participants' minor age). Finally, our data suggested that the clinical usefulness of the PID-5 in adolescent inpatients may extend beyond PDs to profiling adolescents at risk for life-threatening suicide attempts. In particular, PID-5 Depressivity, Anhedonia, and Submissiveness trait scales were significantly associated with adolescents' history of life-threatening suicide attempts, even after controlling for a number of other variables, including mood disorder diagnosis. Discussion As a whole, our study may provide interesting, albeit preliminary data as to the clinical usefulness of PID-5 in the assessment of adolescent inpatients
Polar exploration of complex surface germs
We prove that the topological type of a normal surface singularity
pX, 0q provides finite bounds for the multiplicity and polar multiplicity of pX, 0q,
as well as for the combinatorics of the families of generic hyperplane sections
and of polar curves of the generic plane projections of pX, 0q. A key ingredient
in our proof is a topological bound of the growth of the Mather discrepancies
of pX, 0q, which allows us to bound the number of point blowups necessary to
achieve factorization of any resolution of pX, 0q through its Nash transform.
This fits in the program of polar explorations, the quest to determine the generic
polar variety of a singular surface germ, to which the final part of the paper is
devoted
Case Report: Coexistence of SUNCT and Hypnic Headache in the Same Patient
Background: Short-lasting unilateral neuralgiform headache attacks with conjunctival injection and tearing (SUNCT) and hypnic headache (HH) are two exceedingly rare and distinctly classified primary headaches. The hypothalamus seems to be a crucial region involved in the pathophysiology of both conditions, but no cases of SUNCT and HH co-occurrence have been described so far. Case results: A 49-year-old woman who has been suffering from SUNCT for years, with alternation of symptomatic periods and remissions, developed a new headache with different clinical features, presenting exclusively during sleep and with a dramatic responsiveness to caffeine, that met the diagnostic criteria for HH. Conclusions: The available literature suggests that SUNCT and HH are different conditions but the association in the same patient that we describe supports the concept that they are not mutually exclusive. Further studies are needed to establish if they share a common pathophysiological mechanism
- …