Adjunctive Use of Plasma Rich in Growth Factors for Improving Alveolar Socket Healing: A Systematic Review

Purpose: The purpose of this study was to determine if the adjunctive use of plasma rich in growth factors in post-extraction sites could be beneficial in terms of hard/soft tissue healing and patient\u2019s comfort. Materials and Methods: An electronic search was performed on MEDLINE, EMBASE, Scopus, and CENTRAL. Only controlled clinical trials or randomized clinical trials that used plasma rich in growth factors in the test group were included. The primary outcomes were: pain assessment, complications and adverse events; secondary outcomes were hard tissue healing, bone remodelling, soft tissue healing. Results: Eight comparative studies (5 RCTs) were included. Four studies had a split-mouth design. 614 teeth were extracted in 338 patients. Only qualitative analysis could be done. Postoperative pain and the incidence of complications like alveolar osteitis was consistently lower in the test group. Hard tissue healing, evaluated by clinical, radiographic, histological and histomorphometric technique showed results significantly better for the test group in almost all studies. Better epithelization, keratinized tissue thickness and healing score were also reported. Conclusion: Plasma rich in growth factors may bring advantages in some relevant clinical and radiographic outcomes following tooth extraction, such as bone density and soft tissue healing. It could also represent a useful tool for reducing adverse events, complications and patients\u2019 discomfort, however still not quantifiable

Photometry of supernovae in an image series : methods and application to the Supernova Legacy Survey (SNLS)

We present a technique to measure lightcurves of time-variable point sources on a spatially structured background from imaging data. The technique was developed to measure light curves of SNLS supernovae in order to infer their distances. This photometry technique performs simultaneous PSF photometry at the same sky position on an image series. We describe two implementations of the method: one that resamples images before measuring fluxes, and one which does not. In both instances, we sketch the key algorithms involved and present the validation using semi-artificial sources introduced in real images in order to assess the accuracy of the supernova flux measurements relative to that of surrounding stars. We describe the methods required to anchor these PSF fluxes to calibrated aperture catalogs, in order to derive SN magnitudes. We find a marginally significant bias of 2 mmag of the after-resampling method, and no bias at the mmag accuracy for the non-resampling method. Given surrounding star magnitudes, we determine the systematic uncertainty of SN magnitudes to be less than 1.5 mmag, which represents about one third of the current photometric calibration uncertainty affecting SN measurements. The SN photometry delivers several by-products: bright star PSF flux mea- surements which have a repeatability of about 0.6%, as for aperture measurements; we measure relative astrometric positions with a noise floor of 2.4 mas for a single-image bright star measurement; we show that in all bands of the MegaCam instrument, stars exhibit a profile linearly broadening with flux by about 0.5% over the whole brightness range.Comment: Accepted for publication in A&A. 20 page

Production and detection of doubly charmed tetraquarks

The feasibility of tetraquark detection is studied. For the cc\bar{u}\bar{d} tetraquark we show that in present (SELEX, Tevatron, RHIC) and future facilities (LHCb, ALICE) the production rate is promising and we propose some detectable decay channels.Comment: 6 pages, 5 figure

Possible explanations for different surface quality in laser cutting with 1 micron and 10 microns beams

In laser　cutting　of　thick　steel　sheets,　quality　difference　is　observed　between　cut　surfaces　obtained　with 1 micron and 10 micron laser beams. This paper investigates physical mechanisms for this interesting and important problem of the wavelength dependence. First, striation generation process is described, based on a 3D structure of melt flow on a kerf front, which was revealed for the first time by our recent experimental observations. Two fundamental processes are suggested to explain the difference in the cut surface quality: destabilization of the melt flow in the central part of the kerf front and downward displacement of discrete melt accumulations along the side parts of the front. Then each of the processes is analyzed using a simplified analytical model. The results show that in both processes, different angular dependence of the absorptivity of the laser beam can result in the quality difference. Finally we propose use of radial polarization to improve the quality with the 1 micron wavelength

The impact of bioceramic scaffolds on bone regeneration in preclinical in vivo studies: A systematic review

Bioceramic scaffolds are appealing for alveolar bone regeneration, because they are emerging as promising alternatives to autogenous and heterogenous bone grafts. The aim of this systematic review is to answer to the focal question: in critical-sized bone defects in experimental animal models, does the use of a bioceramic scaffolds improve new bone formation, compared with leaving the empty defect without grafting materials or using autogenous bone or deproteinized bovine-derived bone substitutes? Electronic databases were searched using specific search terms. A hand search was also undertaken. Only randomized and controlled studies in the English language, published in peer-reviewed journals between 2013 and 2018, using critical-sized bone defect models in non-medically compromised animals, were considered. Risk of bias assessment was performed using the SYRCLE tool. A meta-analysis was planned to synthesize the evidence, if possible. Thirteen studies reporting on small animal models (six studies on rats and seven on rabbits) were included. The calvarial bone defect was the most common experimental site. The empty defect was used as the only control in all studies except one. In all studies the bioceramic materials demonstrated a trend for better outcomes compared to an empty control. Due to heterogeneity in protocols and outcomes among the included studies, no meta-analysis could be performed. Bioceramics can be considered promising grafting materials, though further evidence is needed

Case Report: Anterior Cruciate Ligament Calcification in a Patient With Chondrocalcinosis: Micro-Computed Tomography Presentation

In this case report, an incidental postoperative diagnosis of anterior cruciate ligament (ACL) calcification, associated with calcification of posterior cruciate ligament (PCL) and lateral meniscus insertions, was made using micro-computed tomography (μCT) technology in a knee specimen obtained during a total knee replacement (TKR) surgery due to painful tri-compartmental osteoarthritis (OA) with chondrocalcinosis signs at preoperative X-ray. Anterior cruciate ligament calcification is an uncommon finding, and conventional X-ray and MRI are not so helpful in its identification. μCT scan, in contrast, is of interest because it provides highly spatial three-dimensional information with excellent visualization of bones and calcifications. The μCT technology used in this case report allowed us to perform a detailed analysis and a 3-D reconstruction of the calcium pyrophosphate dihydrate (CPPD) crystal deposition about the knee without the need to section the specimens into slice as performed in previous studies. The 3-D model obtained with μCT scan permits to gain more insight into the shape of the calcification within the fibers of the ligamentous structures of the joint

In Vivo and In Vitro Effectiveness of Rotary Nickel-Titanium vs Manual Stainless Steel Instruments for Root Canal Therapy : Systematic Review and Meta-analysis

Introduction: This systematic review evaluated the effectiveness of nickel-titanium (NiTi) rotary files compared to stainless-steel (SST) hand files. Methods: An electronic search was performed on Medline, EMBASE, CENTRAL and Scopus databases up to February 2016. An additional hand searching was performed in 13 journals. The studies were classified according to study type and the outcome variables. Two reviewers independently applied eligibility criteria, extracted data, and three reviewers independently assessed the quality of the evidence of each included study according to The Cochrane Collaboration's procedures. A meta-analysis was performed whenever it was possible. Results: The electronic and hand search strategies yielded 1155 references of studies after removal of duplicates. Four clinical studies (two prospective and two retrospective studies) and 18 in vitro studies (on extracted teeth) were included for the qualitative synthesis after full-text evaluation of the eligible studies. The overall level of methodological quality of the studies included can be considered inadequate. Only one clinical study was judged at low risk of bias, whereas most non-clinical studies had a low risk of bias. Three meta-analyses, based on a very limited number of studies, could be performed. Each meta-analysis contained two studies. Of these, one meta-analysis was based on clinical studies. Conclusions: The results of this systematic review suggested that NiTi rotary instruments were associated with lower canal transportation and apical extrusion when compared to SST hand files, whereas both groups had similar outcomes in terms of success of therapy, amount of residual bacteria, and cleansing ability after treatment. However, due to the limited evidence available, these results should be interpreted with caution. Consequently, more randomized control trials using standardized protocols are needed in order to provide more solid recommendations

Protein kinase C inhibitor and irradiation-induced apoptosis: Relevance of the cytochrome c-mediated caspase-9 death pathway

Caspases are a family of cysteine proteases that constitute the apoptotic cell death machinery, We report the importance of the cytochrome c-mediated caspase-9 death pathway for radiosensitization by the protein kinase C (PKC) inhibitors staurosporine (STP) and PKC-412. In our genetically defined tumor cells, treatment with low doses of STP or the conventional PKC-specific inhibitor PKC-412 in combination with irradiation (5 Gy) potently reduced viability, enhanced mitochondrial cytochrome c release into the cytosol, and specifically stimulated the initiator caspase-9. Whereas treatment with each agent alone had a minimal effect, combined treatment resulted in enhanced caspase-3 activation. This was prevented by broad-range and specific caspase-9 inhibitors and absent in caspase-9-deficient cells. The tumor suppressor p53 was required for apoptosis induction by combined treatment but was dispensable for dose-dependent STP-induced caspase activation. These results demonstrate the requirement for an intact caspase-9 pathway for apoptosis-based radiosensitization by PKC inhibitors and show that STP induces apoptosis independent of p53

Carbon based substrates for interfacing neurons: Comparing pristine with functionalized carbon nanotubes effects on cultured neuronal networks

Pristine (as prepared) carbon nanotube (CNT) based substrates have been widely used to grow and interface neurons in culture. Nerve cells normally differentiate on CNTs and the synaptic networks, newly formed at the interface with this material, usually show an improved robustness in signal transfer. However manipulation of pristine CNTs is often prevented by their low dispersibility and tendency to aggregate in most solvents. This issue can be at least partially solved by adding solubilizing groups to the surface of CNT, which also helps improving their biocompatibility. It becomes therefore of crucial importance to determine whether chemically manipulated CNTs may maintain their performance in improving nerve signaling. Here we study and compare the impact in vitro on neuronal signaling of two classes of chemically modified multiwalled CNTs in reference to pristine CNTs, which are known to be a substrate able to boost neuronal growth and communication. We found that the extent of functionalization and the nature of the functional groups on MWNT sidewalls affect the conductivity and the biological effects of the final derivatives. This information is important for the future design of biointegrated devices