15 research outputs found
Electro-blown spinning: New insight into the effect of electric field and airflow hybridized forces on the production yield and characteristics of nanofiber membranes
Electro-blown spinning (EBS) is an emergent hybridized nanofibers formation technology. Recently, there has been a great interest in introducing this novel method for producing sub-micron, and nanofibers into several applications. For the first time, this comprehensive paper provides a detailed review for the EBS process, including working principle, operation parameters, nanofibers materials, setup modifications, and various applications. EBS is a hybridized nanofibers manufacturing process which combines between the solution-blown spinning (SBS) and electrospinning driving forces. The EBS process can produce outstanding spinning efficiency and superior nanofibers characteristics compared to the conventional spinning methods. Moreover, researchers have proved the efficient spinning capability of EBS with highly viscous polymers and its feasibility for large-scale production. Herein, we will show the potential of EBS to produce high-quality nanofibers and bring new insight into the process challenges and outcomes
Acoustic Energy Harvesting and Sensing via Electrospun PVDF Nanofiber Membrane
This paper introduces a new usage of piezoelectric poly (vinylidene fluoride) (PVDF) electrospun nanofiber (NF) membrane as a sensing unit for acoustic signals. In this work, an NF mat has been used as a transducer to convert acoustic signals into electric voltage outcomes. The detected voltage has been analyzed as a function of both frequency and amplitude of the excitation acoustic signal. Additionally, the detected AC signal can be retraced as a function of both frequency and amplitude with some wave distortion at relatively higher amplitudes and within a certain acoustic spectrum region. Meanwhile, the NFs have been characterized through piezoelectric responses, beta sheet calculations and surface morphology. This work is promising as a low-cost and innovative solution to harvest acoustic signals coming from wide resources of sound and noise
Piezoelastic PVDF/TPU Nanofibrous Composite Membrane: Fabrication and Characterization
Poly (vinylidene fluoride) nanofibers (PVDF NFs) have been extensively used in energy harvesting applications due to their promising piezoresponse characteristics. However, the mechanical properties of the generated fibers are still lacking. Therefore, we are presenting in this work a promising improvement in the elasticity properties of PVDF nanofibrous membrane through thermoplastic polyurethane (TPU) additives. Morphological, physical, and mechanical analyses were performed for membranes developed from different blend ratios. Then, the impact of added weight ratio of TPU on the piezoelectric response of the formed nanofibrous composite membranes was studied. The piezoelectric characteristics were studied through impulse loading testing where the electric voltage had been detected under applied mass weights. Piezoelectric characteristics were investigated further through a pressure mode test the developed nanofibrous composite membranes were found to be mechanically deformed under applied electric potential. This work introduces promising high elastic piezoelectric materials that can be used in a wide variety of applications including energy harvesting, wearable electronics, self-cleaning filters, and motion/vibration sensors
Solution Blow Spinning of Polyvinylidene Fluoride Based Fibers for Energy Harvesting Applications: A Review
Polyvinylidene fluoride (PVDF)-based piezoelectric materials (PEMs) have found extensive applications in energy harvesting which are being extended consistently to diverse fields requiring strenuous service conditions. Hence, there is a pressing need to mass produce PVDF-based PEMs with the highest possible energy harvesting ability under a given set of conditions. To achieve high yield and efficiency, solution blow spinning (SBS) technique is attracting a lot of interest due to its operational simplicity and high throughput. SBS is arguably still in its infancy when the objective is to mass produce high efficiency PVDF-based PEMs. Therefore, a deeper understanding of the critical parameters regarding design and processing of SBS is essential. The key objective of this review is to critically analyze the key aspects of SBS to produce high efficiency PVDF-based PEMs. As piezoelectric properties of neat PVDF are not intrinsically much significant, various additives are commonly incorporated to enhance its piezoelectricity. Therefore, PVDF-based copolymers and nanocomposites are also included in this review. We discuss both theoretical and experimental results regarding SBS process parameters such as solvents, dissolution methods, feed rate, viscosity, air pressure and velocity, and nozzle design. Morphological features and mechanical properties of PVDF-based nanofibers were also discussed and important applications have been presented. For completeness, key findings from electrospinning were also included. At the end, some insights are given to better direct the efforts in the field of PVDF-based PEMs using SBS technique
Solution Blow Spinning of High-Performance Submicron Polyvinylidene Fluoride Fibres: Computational Fluid Mechanics Modelling and Experimental Results
Computational fluid dynamics (CFD) was used to investigate characteristics of high-speed air as it is expelled from a solution blow spinning (SBS) nozzle using a k-ε turbulence model. Air velocity, pressure, temperature, turbulent kinetic energy and density contours were generated and analysed in order to achieve an optimal attenuation force for fibre production. A bespoke convergent nozzle was used to produce polyvinylidene fluoride (PVDF) fibres at air pressures between 1 and 5 bar. The nozzle comprised of four parts: a polymer solution syringe holder, an air inlet, an air chamber, and a cap that covers the air chamber. A custom-built SBS setup was used to produce PVDF submicron fibres which were consequently analysed using scanning electron microscope (SEM) for their morphological features. Both theoretical and experimental observations showed that a higher air pressure (4 bar) is more suitable to achieve thin fibres of PVDF. However, fibre diameter increased at 5 bar and intertwined ropes of fibres were also observed
Study of Air Pressure and Velocity for Solution Blow Spinning of Polyvinylidene Fluoride Nanofibres
Solution blow spinning (SBS) is gaining popularity for producing fibres for smart textiles and energy harvesting due to its operational simplicity and high throughput. The whole SBS process is significantly dependent on the characteristics of the attenuation force, i.e., compressed air. Although variation in the fibre morphology with varying air input pressure has been widely investigated, there is no available literature on the experimentally determined flow characteristics. Here, we have experimentally measured and calculated airflow parameters, namely, output air pressure and velocity in the nozzle wake at 12 different pressure values between 1 and 6 bar and 11 different positions (retracted 5 mm to 30 mm) along the centreline. The results obtained in this work will answer many critical questions about optimum protrusion length for the polymer solution syringe and approximate mean fibre diameter for polyvinylidene fluoride (PVDF) at given output air pressure and velocity. The highest output air pressure and velocity were achieved at a distance of 3–5 mm away from the nozzle wake and should be an ideal location for the apex of the polymer solution syringe. We achieved 250 nm PVDF fibres when output air pressure and velocity were 123 kPa and 387 m/s, respectively
Exploring advances in nanofiber-based face masks: a comprehensive review of mechanical, electrostatic, and antimicrobial functionality filtration for the removal of airborne particulate matter and pathogens
The filtration of airborne particulate matter (PM) and aerosols utilizing nonwoven fibrous materials has received significant research concern due to the continuing global pandemics, especially the outbreak of coronavirus disease (COVID-19), and particularly for face masks as a measure of personal protection. Although spun-bond or melt-blown nonwoven fabrics are among the pioneer materials in the development of polymer microfiber-based face masks or air filters on a large scale, relatively new nonwoven manufacturing processes like electrospinning and solution blow spinning (SBS) are gaining momentum among manufacturers of filter membranes. The high filtration performance of nanofiber face masks is due to their high surface area to volume ratio which increases the interaction between the nanofiber and PM and improves the electrostatic charge distribution of electret filters, allowing enhanced capture capability based on electrostatic deposition. Moreover, the small diameter of nanofibrous filters improves the breathability of the face mask by providing the slip effect, which in turn reduces the pressure drop through the membrane. This paper provides a comprehensive review of contemporary advances in nanofiber face masks, detailing the working mechanism involved, reviewing recent experimental studies, and discussing improvements in filtration efficiency for three main nanofibrous air filtration strategies, including mechanical and electrostatic filtration and antimicrobial functionality. Furthermore, prospective research is introduced which considers the synergistic combination effects of the three filtration mechanisms in designing a multifunctional nanofiber structure that can efficiently capture a wide range of PM with higher filtration efficiency and lower drops in pressure. New trends in the antimicrobial activity of smart material-based nanofibrous membranes in the fight against infectious airborne agents are also described
Static-Aligned Piezoelectric Poly (Vinylidene Fluoride) Electrospun Nanofibers/MWCNT Composite Membrane: Facile Method
Polyvinylidene Fluoride (PVDF) piezoelectric electrospun nanofibers have been intensively used for sensing and actuation applications in the last decade. However, in most cases, random PVDF piezoelectric nanofiber mats have moderate piezoelectric response compared to aligned PVDF nanofibers. In this work, we demonstrate the effect of alignment conducted by a collector setup composed of two-metal bars with gab inside where the aligned fiber can be formed. That is what we called static aligned nanofibers, which is distinct from the dynamic traditional technique using a high speed rotating drum. The two-bar system shows a superior alignment degree for the PVDF nanofibers. Also, the effect of added carbon nanotubes (CNTs) of different concentrations to PVDF nanofibers is studied to observe the enhancement of piezoelectric response of PVDF nanofibers. Improvement of β-phase content of aligned (PVDF) nanofibers, as compared to randomly orientated fibers, is achieved. Significant change in the piezoelectricity of PVDF fiber is produced with added CNTs with saturation response in the case of 0.3 wt % doping of CNTs, and piezoelectric sensitivity of 73.8 mV/g with applied masses down to 100 g
Solution blow spun piezoelectric nanofibers membrane for energy harvesting applications
Energy harvesting systems have benefited from the use of one-dimensional nanostructures such as nanofibers. For example, the conversion of mechanical energy to electrical energy has paved the way for nanofibers to be used in a wide range of applications. PVDF (polyvinylidene fluoride) has long been regarded as a promising material for piezoelectric applications. Furthermore, the solution blow spinning (SBS) technique, with its simple setup, can mass-produce nanofibers with the required properties for applications needing great flexibility while also attaining high piezoelectricity. The aim of this research is to investigate how electric voltage can be generated from flexible piezoelectric materials such as SBS PVDF nanofibers. Meanwhile, the nanofibers mats have been integrated into a basic setup that stimulates the generation of DC voltage under mechanical pressure produced by footsteps. The work followed a morphological characterization using SEM and studying the β-phase of the fabricated fibers using Fourier-transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD), and it was found that β phase content for solution blow spun nanofibers reached 80% and the β-crystalline phase was enhanced due to the transformation from α to β phases. Our manufactured SBS nanofibers can create electric voltage under the influence of mechanical stresses, to simulate the foot step pressure, with varying amplitude and vibrational frequency, according to piezoelectric analysis
Tailored CNTs Buckypaper Membranes for the Removal of Humic Acid and Separation of Oil-In-Water Emulsions
Carbon nanotubes (CNTs) are a robust material and proven as a promising candidate for a wide range of electronic, optoelectronic and environmental applications. In this work, two different methods were utilized for the preparation of CNTs exhibiting different aspect ratios via chemical vapor deposition (CVD). The as-prepared CNTs were analyzed using scanning electron microscopy (SEM), transmission electron microscopy (TEM), N2adsorption isotherms, thermogravimetric analysis and Raman spectroscopy in order to investigate their morphological and structural properties. Free-standing CNTs “buckypaper” membranes were fabricated, characterized and tailored to meet the requirements of two applications, i.e., (1) the removal of humic acid (HA) from water and (2) separation of oil-in-water emulsions. It was revealed that the hydrophobic buckypapers showed high separation performance for Shell oil-in-water emulsions filtration, with up to 98% through the accumulation of oil droplets onto the membrane surface. The absorption capacity of buckypaper membranes for various organic liquids (oil, chloroform and toluene) was evaluated over 10 absorption cycles to investigate their recyclability and robustness. Moreover, surface modification was introduced to the pristine CNTs to increase their surface hydrophilicity and improve the pure water permeability of buckypapers. These modified buckypapers showed high flux for HA solutions and excellent HA rejection efficiency up to 95%via size exclusion and electrostatic repulsion mechanisms