258 research outputs found
Effect of a built-in electric field in asymmetric ferroelectric tunnel junctions
The contribution of a built-in electric field to ferroelectric phase
transition in asymmetric ferroelectric tunnel junctions is studied using a
multiscale thermodynamic model. It is demonstrated in details that there exists
a critical thickness at which an unusual ferroelectric-\'\' polar
non-ferroelectric\rq\rq phase transition occurs in asymmetric ferroelectric
tunnel junctions. In the \'\' polar non-ferroelectric\rq\rq phase, there is
only one non-switchable polarization which is caused by the competition between
the depolarizing field and the built-in field, and closure-like domains are
proposed to form to minimize the system energy. The transition temperature is
found to decrease monotonically as the ferroelectric barrier thickness is
decreased and the reduction becomes more significant for the thinner
ferroelectric layers. As a matter of fact, the built-in electric field does not
only result in smearing of phase transition but also forces the transition to
take place at a reduced temperature. Such findings may impose a fundamental
limit on the work temperature and thus should be further taken into account in
the future ferroelectric tunnel junction-type or ferroelectric capacitor-type
devices.Comment: 9 pages, 8 figures, submitted to PR
Partial decoupling between strain and polarization in mono-oriented Pb(Zr0.2Ti0.8)O3 thin film
The structural evolution of epitaxial mono-oriented (i.e. with the c-axis
perpendicular to the interface) ferroelectric Pb(Zr0.2,Ti0.8)O3 thin film has
been investigated, using high resolution, temperature dependent, X-ray
diffraction. The full set of lattice parameters was obtained, it allowed to
estimate the variation of the polarization as a function of temperature,
underlying the difference between the polarization-induced tetragonality and
the elastic one. The temperature evolution of the misfit strain has been
calculated and found to be in good agreement with the theoretical
temperature-misfit strain phase diagramComment: 11 pages, 3 figure
Direct and indirect measurements on electrocaloric effect : recent developments and perspectives
Y.L. and B.D. acknowledge the China Scholarship Council (CSC) for funding Y.L.'s stay in France and a public grant overseen by the French National Research Agency (ANR) as part of the “Investissements d'Avenir” program (Reference: ANR-10-LABX-0035, Labex NanoSaclay).It has been ten years since the discovery of the giant electrocaloric effect in ferroelectric materials showed that it is possible to employ this effect for substantial cooling applications. This last decade has been marked by increasing research interest, especially in characterizing and measuring the electrocaloric effect using both the so-called indirect and direct approaches. In this context, a comprehensive summary and careful reexamination of these approaches are very timely and of great importance to justify the assumptions used in different measurement techniques. This review is therefore dedicated to cover recent important and rapid advances from both the indirect and direct measurements and provides critical insights relevant for quantifying the electrocaloric effect. It involves electrocaloric materials from normal ferroelectrics, antiferroelectrics, and relaxors, and it fundamentally focuses on how the electrocaloric entropy changes in response to electric field in these typical electrocalorics. The article addresses recent developments, especially during the past three years, such as technical selection of proper polarization-electric field loops, negative electrocaloric effect in antiferroelectrics and relaxors, the controversial debate on the indirect method in relaxors, the important role of field dependence of specific heat, kinetic factors, and so on. Moreover, this review also is concerned with extracting reliable data by direct measurements. Four typical techniques and devices used recently, such as thermocouples, differential scanning calorimeters, specifically designed calorimeters, and scanning thermal microscopy, are briefly reviewed, while infrared cameras are emphasized. We hope that our review will not only provide a useful background to understand fundamentally the electrocaloric effect and what one really measures but also may act as a practical guide to exploit and develop electrocalorics towards the design of suitable devices.Publisher PDFPeer reviewe
Some strategies for improving caloric responses with ferroelectrics
Y.L. and B.D. acknowledge the China Scholarship Council (CSC) for funding Y.L.’s stay in France and a public grant overseen by the French National Research Agency (ANR) as part of the “Investissements d’Avenir” program (Reference No. ANR-10-LABX-0035, Labex NanoSaclay).Many important breakthroughs and significant engineering developments have been achieved during the past two decades in the field of caloric materials. In this review, we address ferroelectrics emerging as ideal materials which permit both giant elastocaloric and/or electrocaloric responses near room temperature. We summarize recent strategies for improving caloric responses using geometrical optimization, maximizing the number of coexisting phases, combining positive and negative caloric responses, introducing extra degree of freedom like mechanical stress/pressure, and multicaloric effect driven by either single stimulus or multiple stimuli. This review highlights the promising perspective of ferroelectrics for developing next-generation solid-state refrigeration.Publisher PDFPeer reviewe
Multiple high-pressure phase transitions in BiFeO3
We investigate the high-pressure phase transitions in BiFeO3 by single
crystal and powder x-ray diffraction, as well as single crystal Raman
spectroscopy. Six phase transitions are reported in the 0-60 GPa range. At low
pressures, up to 15 GPa, 4 transitions are evidenced at 4, 5, 7 and 11 GPa. In
this range, the crystals display large unit cells and complex domain
structures, which suggests a competition between complex tilt systems and
possibly off-center cation displacements. The non polar Pnma phase remains
stable over a large pressure range between 11 and 38 GPa, where the distortion
(tilt angles) changes only little with pressure. The two high-pressure phase
transitions at 38 and 48 GPa are marked by the occurence of larger unit cells
and an increase of the distorsion away from the cubic parent perovskite cell.
We find no evidence for a cubic phase at high pressure, nor indications that
the structure tends to become cubic. The previously reported insulator-to-metal
transition at 50 GPa appears to be symmetry breaking.Comment: 11 pages, 8 figure
Direct measurement of electrocaloric effect in lead-free Ba(SnxTi1-x)O3 ceramics
In this study, we report on investigation of the electrocaloric (EC) effect in lead-free Ba(SnxTi1-x)O3 (BSnT) ceramics with compositions in the range of 0.08 ≤ x ≤ 0.15 by the direct measurement method using a differential scanning calorimeter. The maximum EC temperature change, ΔTEC-max = 0.63 K under an electric field of 2 kV/mm, was observed for the composition with x = 0.11 at ∼44 °C around the multiphase coexistence region. We observed that the EC effect also peaks at transitions between ferroelectric phases of different symmetries. Comparison with the results of indirect EC measurements from our previous work shows that the indirect approach provides reasonable estimations of the magnitude of the largest EC temperature changes and EC strength. However, it fails to describe correctly temperature dependences of the EC effect for the compositions showing relaxor-like behaviour (x = 0.14 and 0.15) because of their non-ergodic nature. Our study provides strong evidence supporting that looking for multiphase ferroelectric materials can be very useful to optimize EC performance
Condensation of the atomic relaxation vibrations in lead-magnesium-niobate at
We present neutron diffraction, dielectric permittivity and photoconductivity
measurements, evidencing that lead-magnesium niobate experiences a diffuse
phase transformation between the spherical glass and quadrupole glass phases,
in the temperature interval between 400 K and 500 K, with the quadrupole phase
possessing extremely high magnitudes of dielectric permittivity. Our analysis
shows that the integral diffuse scattering intensity may serve as an order
parameter for this transformation. Our experimental dielectric permittivity
data support this choice. These data are important for the aplications desiring
giant dielectric responses, in a wide temperature intervals and not related to
electron's excitations.Comment: 6 figure
Influence of epitaxial strain on elastocaloric effect in ferroelectric thin films
Y.L., J.W., and B.D. thank the China Scholarship Council (CSC). X.J.L., J.W., Y.L., and B.D. thank the National Science Foundation of China (NSFC Nos. 51272204 and 51372195), the Ministry of Science and Technology of China through a 973-Project (No. 2012CB619401), and “One Thousand Youth Talents” program for support. L.B. thank NSF Grant No. DMR-1066158.We report the influence of epitaxial strain um on the elastocaloric properties of BaTiO3 thin films. Using thermodynamic calculations, we show that there exists a critical compressive stress σ3c at which the elastocaloric effect is maximized for any compressive misfit strain we investigate. Moreover, it is found that |σ3c| decreases significantly with decreasing |um| , which is accompanied by a reduction of the elastocaloric response. Interestingly, a several fold enhancement in the electrocaloric effect can be achieved for stress in proximity of σ3c . The elastocaloric effect predicted here may find potential cooling applications by combining the stress-mediated electrocaloric effect or designing hybrid elastocaloric/electrocaloric devices in the future.Publisher PDFPeer reviewe
- …