The effect of the relative amount of ingredients on the rheological properties of semolina doughs

"Pani carasau" is a traditional Sardinian bread, made with re-milled durum wheat semolina, with a long shelf-life. The production process is highly energy consuming, but its automation can make it more energy-efficient and sustainable. This requires a deep knowledge of the rheological parameters of the doughs. This study investigated the rheological properties of doughs-prepared by mixing semolina with water, yeast, and salt-as a function of the relative amount of the ingredients. The rheological measurements were carried out by an Anton Paar MCR 102 rheometer, equipped with a plate-plate fixture. In more detail, frequency sweep and creep tests were performed. It was found that doughs obtained with different amounts of ingredients showed significant differences in the rheological responses. The addition of water led to a significant decrease in the viscosity and improved the deformability of the dough. In addition, the yeast addition produced a viscosity decrease, while the presence of salt produced an improvement of the three-dimensional gluten network characteristics and, consequently, of the strength of the dough. In addition to the production process of pani carasau, this work contributes to improving the general performance of the doughs used in the production of flour-and-semolina-based foods

Microbiological environmental monitoring in high-risk departments during building activities in a hospital site

Background. This study examines the microbial and fungal contamination associated with the presence of renovation works in a hospital site in Sardinia (Italy). Methods. Microbiological environmental monitoring was carried out before, during and at the conclusion of the works in the Ophthalmology Department in view of a risk assessment procedure. Results. Although the median values of microbial and fungal counts were found raised during the works, protective measures set out by the internal procedures limited the contamination level. Conclusions. This study emphasizes the benefits of environmental surveillance for airborne contamination to help prevent outbreaks of nosocomial mycosis associated with construction work

The new 5 MN hexapod-shaped multicomponent build-up system project.

The new 5 MN Hexapod-Shaped Multicomponent Build-Up System (HSM-BUS) represents a significant progress in the field of reference transducers in the high force range. As any build-up system, the presented HSM-BUS can lead not only to measure forces 5 times higher than the capacity of a each single Uniaxial Force Transducer (UFT), but gives also information about the other components of the force vector and of the moment vector. The goal of the project is mainly to enhance the internal traceability of INRIM force laboratory up to 5 MN, using the HSM-BUS as reference force transducer up the range of 5 MN. Additionally, since this type of BUS is a multicomponent, it would also be used to minimize the spurious component of the force applied by the Standard Force Machine during the calibration of uniaxial force transducers

The new IMGC-02 transportable absolute gravimeter: measurement apparatus and applications in geophysics and volcanology

The research carried out at the Istituto Nazionale di Ricerca Metrologica (formerly Istituto di Metrologia «G. Colonnetti») aiming to develop a transportable ballistic absolute gravimeter ended with a new version of the instrument, called the IMGC-02. It uses laser interferometry to measure the symmetrical free rising and falling motion of a test mass in the gravity field. Providing the same accuracy achieved with previous versions, the instrumental improvements mainly concern size, weight, data processing algorithms and operational simplicity. An uncertainty of 9 μGal (1 μGal=1×10–8 m·s−2) can be achieved within a single observation session, lasting about 12 h, while the time series of several observation sessions show a reproducibility of 4 μGal. At this level, gravity measurements provide useful information in Geophysics and Volcanology. A wide set of dynamic phenomena, i.e. seismicity and volcanic activity, can produce temporal gravity changes, often quite small, with an amplitude ranging from a few to hundreds of microgals. Therefore the IMGC absolute gravimeter has been employed since 1986 in surveying the Italian active volcanoes. A brief history of the gravimeter and the description of the new apparatus, together with the main results of ongoing applications in Geophysics and Volcanology are presented

The new IMGC-02 transportable absolute gravimeter: measurement apparatus and applications in geophysics and volcanology

The research carried out at the Istituto Nazionale di Ricerca Metrologica (formerly Istituto di Metrologia «G. Colonnetti») aiming to develop a transportable ballistic absolute gravimeter ended with a new version of the instrument, called the IMGC-02. It uses laser interferometry to measure the symmetrical free rising and falling motion of a test mass in the gravity field. Providing the same accuracy achieved with previous versions, the instrumental improvements mainly concern size, weight, data processing algorithms and operational simplicity. An uncertainty of 9 μGal (1 μGal=1×10–8 m·s−2) can be achieved within a single observation session, lasting about 12 h, while the time series of several observation sessions show a reproducibility of 4 μGal. At this level, gravity measurements provide useful information in Geophysics and Volcanology. A wide set of dynamic phenomena, i.e. seismicity and volcanic activity, can produce temporal gravity changes, often quite small, with an amplitude ranging from a few to hundreds of microgals. Therefore the IMGC absolute gravimeter has been employed since 1986 in surveying the Italian active volcanoes. A brief history of the gravimeter and the description of the new apparatus, together with the main results of ongoing applications in Geophysics and Volcanology are presented