Comparison of motor stator teeth built of soft magnetic composite and laminated silicon steel sheets in an axial flux permanent magnet synchronous machine

This paper compares the iron losses generated by the concentrated excitation windings for the axial flux permanent magnet synchronous machine stator core elements constructed with laminated silicon steel sheets and soft magnetic composites. The two types of eddy current losses for laminated silicon steel sheets are taken into account. A 3D nonlinear finite element method in the time domain is used to calculate all flux density distributions for various frequencies and different magnitudes. Experimental measurements are also performed to validate the 3D model

A Structural Analysis of Field/Circuit Coupled Problems Based on a Generalised Circuit Element

In some applications there arises the need of a spatially distributed description of a physical quantity inside a device coupled to a circuit. Then, the in-space discretised system of partial differential equations is coupled to the system of equations describing the circuit (Modified Nodal Analysis) which yields a system of Differential Algebraic Equations (DAEs). This paper deals with the differential index analysis of such coupled systems. For that, a new generalised inductance-like element is defined. The index of the DAEs obtained from a circuit containing such an element is then related to the topological characteristics of the circuit's underlying graph. Field/circuit coupling is performed when circuits are simulated containing elements described by Maxwell's equations. The index of such systems with two different types of magnetoquasistatic formulations (A* and T-$\Omega$) is then deduced by showing that the spatial discretisations in both cases lead to an inductance-like element

An efficient steady-state analysis of the eddy current problem using a parallel-in-time algorithm

This paper introduces a parallel-in-time algorithm for efficient steady-state solution of the eddy current problem. Its main idea is based on the application of the well-known multi-harmonic (or harmonic balance) approach as the coarse solver within the periodic parallel-in-time framework. A frequency domain representation allows for the separate calculation of each harmonic component in parallel and therefore accelerates the solution of the time-periodic system. The presented approach is verified for a nonlinear coaxial cable model

Isogeometric Analysis and Harmonic Stator-Rotor Coupling for Simulating Electric Machines

This work proposes Isogeometric Analysis as an alternative to classical finite elements for simulating electric machines. Through the spline-based Isogeometric discretization it is possible to parametrize the circular arcs exactly, thereby avoiding any geometrical error in the representation of the air gap where a high accuracy is mandatory. To increase the generality of the method, and to allow rotation, the rotor and the stator computational domains are constructed independently as multipatch entities. The two subdomains are then coupled using harmonic basis functions at the interface which gives rise to a saddle-point problem. The properties of Isogeometric Analysis combined with harmonic stator-rotor coupling are presented. The results and performance of the new approach are compared to the ones for a classical finite element method using a permanent magnet synchronous machine as an example

Automated Netlist Generation for 3D Electrothermal and Electromagnetic Field Problems

We present a method for the automatic generation of netlists describing general three-dimensional electrothermal and electromagnetic field problems. Using a pair of structured orthogonal grids as spatial discretisation, a one-to-one correspondence between grid objects and circuit elements is obtained by employing the finite integration technique. The resulting circuit can then be solved with any standard available circuit simulator, alleviating the need for the implementation of a custom time integrator. Additionally, the approach straightforwardly allows for field-circuit coupling simulations by appropriately stamping the circuit description of lumped devices. As the computational domain in wave propagation problems must be finite, stamps representing absorbing boundary conditions are developed as well. Representative numerical examples are used to validate the approach. The results obtained by circuit simulation on the generated netlists are compared with appropriate reference solutions.Comment: This is a pre-print of an article published in the Journal of Computational Electronics. The final authenticated version is available online at: https://dx.doi.org/10.1007/s10825-019-01368-6. All numerical results can be reproduced by the Matlab code openly available at https://github.com/tc88/ANTHE

Coupled Simulation of Transient Heat Flow and Electric Currents in Thin Wires: Application to Bond Wires in Microelectronic Chip Packaging

This work addresses the simulation of heat flow and electric currents in thin wires. An important application is the use of bond wires in microelectronic chip packaging. The heat distribution is modeled by an electrothermal coupled problem, which poses numerical challenges due to the presence of different geometric scales. The necessity of very fine grids is relaxed by solving and embedding a 1D sub-problem along the wire into the surrounding 3D geometry. The arising singularities are described using de Rham currents. It is shown that the problem is related to fluid flow in porous 3D media with 1D fractures [C. D'Angelo, SIAM Journal on Numerical Analysis 50.1, pp. 194-215, 2012]. A careful formulation of the 1D-3D coupling condition is essential to obtain a stable scheme that yields a physical solution. Elliptic model problems are used to investigate the numerical errors and the corresponding convergence rates. Additionally, the transient electrothermal simulation of a simplified microelectronic chip package as used in industrial applications is presented.Comment: all numerical results can be reproduced by the Matlab code openly available at https://github.com/tc88/ETwireSi

Faunal Subsistence Strategies Among Initial Period Coastal Fishers at the Gramalote Site in the Moche Valley of Peru

This faunal analysis focuses on vertebrate remains from the northern coastal site of Gramalote in the lower Moche Valley of Peru. Gramalote dates to the Initial Period (1800-900 BC), a time of great change due to a rise of inland agricultural and increasing sedentism. This intrasite analysis of fauna at Gramalote seeks to contextualize potential subsistence shifts through time. Subsistence specialization regarding fish exploitation of coastal fishers is explored through faunal analysis of vertebrates at this site. For an ecological perspective, this project examines the application of Moseley\u27s Maritime Foundations of Andean Civilization and Optimal Foraging Theory models. The sample analyzed comes from a stratified unit Unit 18A, resulting from the 2005 excavations at the site directed by Jesus Briceño Rosario (Briceño and Billman 2008). The total sample consisted of 22,940animal bones, of which 14,542 are the focus of this analysis. To understand possible chronological shifts in the importance of fish, three questions were examined. How does the vertebrate composition by class compare between the 2005 sample and the data previously reported by Pozorski? For Unit 18A, does the relative importance of fish steadily increase over time? How can we add the variable of depositional context to our evaluation of change over time