A 1 GHz RF Trigger Unit implemented in FPGA logic

Applications of Trigger Units (TU) can be found in almost all accelerators at CERN. The requirements in terms of operating frequencies, configuration or modes of operation change from one application to another, how-ever, in terms of design requirements for the Trigger Unit, the operating frequency is probably the most demanding one. In this work, we present an implementation of a Trigger Unit almost fully embedded in the FPGA logic operating at a maximum frequency of 1 GHz using the internal serializer/deserializer circuitry to simplify the timing constraints of the design. This implementation allows easy reconfiguration of the module and the development of new modes of operation, which are described in this paper.Comment: Poster presented at LLRF Workshop 2017 (LLRF2017, arXiv:1803.07677

A broadband THz receiver for low background space applications

We have developed a sensitive bolometric receiver for low background space applications. In a 10 percent bandwidth at 1 THz, this receiver is approximately 100 times more sensitive than a quantum limited heterodyne receiver with a 1 GHz IF bandwidth. This receiver is designed to be used for the long wavelength band (200-700 microns) in the MIPS instrument on NASA's SIRTF satellite. The bolometers are cooled to 100 mK by an adiabatic demagnetization refrigerator. Roughly 60 g of cesium chrome alum salt is partially demagnetized to 100 mK, followed by a slow regulated downramp to compensate for the heat leak. The hold time of the ADR system is about 18 hours with a temperature stability of delta T(sub rms) approx. equals 10 micro-K. The composite bolometers have electrical responsivities of 10(exp 9)V/W and electrical NEP's of about 3x10(exp -17) W/square root of Hz. The bolometer signals are read out by JFET preamplifiers located on the helium plate and operated at 120 K. We have addressed a number of space qualification issues, such as the development of an analog magnet controller, construction of a cryogenic shake-table for bolometers and selection of the paramagnetic salt CCA which can survive a bakeout at 50 C. The receiver is scheduled to be flown in the spring of 1992 on a balloon telescope. This flight has a dual purpose. One is to provide realistic test of the capabilities of the new receiver. The other is to search for anisotropies in the cosmic microwave background on scales of a few degrees

Error and Attack Tolerance of Layered Complex Networks

Many complex systems may be described not by one, but by a number of complex networks mapped one on the other in a multilayer structure. The interactions and dependencies between these layers cause that what is true for a distinct single layer does not necessarily reflect well the state of the entire system. In this paper we study the robustness of three real-life examples of two-layer complex systems that come from the fields of communication (the Internet), transportation (the European railway system) and biology (the human brain). In order to cover the whole range of features specific to these systems, we focus on two extreme policies of system's response to failures, no rerouting and full rerouting. Our main finding is that multilayer systems are much more vulnerable to errors and intentional attacks than they seem to be from a single layer perspective.Comment: 5 pages, 3 figure

Evaluating 35 Methods to Generate Structural Connectomes Using Pairwise Classification

There is no consensus on how to construct structural brain networks from diffusion MRI. How variations in pre-processing steps affect network reliability and its ability to distinguish subjects remains opaque. In this work, we address this issue by comparing 35 structural connectome-building pipelines. We vary diffusion reconstruction models, tractography algorithms and parcellations. Next, we classify structural connectome pairs as either belonging to the same individual or not. Connectome weights and eight topological derivative measures form our feature set. For experiments, we use three test-retest datasets from the Consortium for Reliability and Reproducibility (CoRR) comprised of a total of 105 individuals. We also compare pairwise classification results to a commonly used parametric test-retest measure, Intraclass Correlation Coefficient (ICC).Comment: Accepted for MICCAI 2017, 8 pages, 3 figure

Move of a large but delicate apparatus on a trailer with air-ride suspension

When valuable delicate goods are shipped by truck, attention must be paid to vibrations that may cause damage. We present a case study of moving an extremely delicate 6230-kg superconducting magnet, immersed in liquid nitrogen, from Livermore, CA to Seattle, WA showing the steps of fatigue analysis of the load, a test move, and acceleration monitoring of the final move to ensure a successful damage-free transport

Recent results on the properties of two-phase argon avalanche detectors

The characteristic properties of two-phase Ar avalanche detectors, including those obtained with CsI photocathode, are further studied. Such detectors are relevant in the field of coherent neutrino-nucleus scattering and dark matter search experiments. The detectors investigated comprised a 1 cm thick liquid Ar layer followed by a triple-GEM multiplier. In these detectors, typical gains reaching 10000 were obtained with good reproducibility and a stable operation for at least one day was demonstrated. Amplitude and pulse-shape characteristics are presented under irradiation with X-rays, gamma-rays and neutrons from different radioactive sources. The detection of both primary scintillation and ionization signals at higher gains, at a deposited energy of 60 keV, has been demonstrated.Comment: 6 pages, 11 figures. Presented at Xth Int. Conf. for Collid. Beam Phys., Feb 28 - March 6, 2008, Novosibirsk, to be published in Nucl. Instr. Meth.

A SQUID-based microwave cavity search for dark-matter axions

Axions in the micro eV mass range are a plausible cold dark matter candidate and may be detected by their conversion into microwave photons in a resonant cavity immersed in a static magnetic field. The first result from such an axion search using a superconducting first-stage amplifier (SQUID) is reported. The SQUID amplifier, replacing a conventional GaAs field-effect transistor amplifier, successfully reached axion-photon coupling sensitivity in the band set by present axion models and sets the stage for a definitive axion search utilizing near quantum-limited SQUID amplifiers.Comment: 4 pages, 5 figures, submitted to PR