Reasoned Piety: A summary and explication of discussion of one of al-Ghazālī's Incoherence of the Philosophers

UMKC Honors Progra

Electrochemical preparation of peroxodisulfuric acid using boron doped diamond thin film electrodes

We have investigated the electrochemical oxidation of sulfuric acid on boron-doped synthetic diamond electrodes (BDD) obtained by HF CVD on p-Si. The results have shown that high current efficiency for sulfuric acid oxidation to peroxodisulfuric acid can be achieved in concentrated H2SO4 (>2 M) at moderate temperatures (8–10 °C). The main side reaction is oxygen evolution. Small amounts of peroxomonosulfuric acid (Caro's acid) have also been detected. A reaction mechanism involving hydroxyl radicals, HSO4− and undissociated H2SO4 has been proposed. According to this mechanism electrogenerated hydroxyl radicals at the BDD anode react with HSO4− and H2SO4 giving peroxodisulfate

Kinetic modelling of the electrochemical mineralization of organic pollutants for wastewater treatment

The electrochemical mineralization of organic pollutants is a new technology for treatment of dilute wastewater (COD< 5gL−1). In this method, use of the electrical energy can produce complete oxidation of pollutants on high oxidation power anodes. An ideal anode for this type of treatment is a boron-doped diamond electrode (BDD) characterized by a high reactivity towards oxidation of organics. In the present work kinetic aspects of organic mineralization is discussed. The proposed theoretical kinetic model on boron-doped diamond anodes is in excellent agreement with experimental results. In addition economic aspects of electrochemical organic mineralization are reporte

The Industrial Electrolytic Regeneration of Mn2(SO4)3 for the Oxidation of Substituted Toluene to the Corresponding Benzaldehyde

A new industrial process for the electrolytic regeneration of Mn2(SO4)3 is presented in which:– a slurry of MnSO4/Mn2(SO4)3 in 55% H2SO4 is used as a carrier,– the electrolyte is purified with an optimum mode before electrogeneration, and–a new industrial electrochemical reactor is developed for an economical electrogeneration of Mn2(SO4)

Impedance spectroscopic investigation of a Rh/YSZ catalyst under polarization

Electrochemical impedance spectra at 450-600 °C and $${P_{{\rm{O}}_{\rm{2}} } = 0.5}$$ kPa of a rhodium catalyst interfaced with yttria-stabilized-zirconia (Rh/YSZ) were compared with a model based on the mechanism of electrochemical promotion. In the proposed equivalent electric circuit, existence of an "effective” double layer at the gas-exposed catalyst surface and its potential-controlled modification via diffusion of oxygen ions between the O2− conducting solid electrolyte support (YSZ) and the catalyst are represented by two additional elements: adsorption capacitance and Warburg impedance. Under positive polarization, the adsorption capacitance increases dramatically indicating reinforcement of the "effective” double layer at the catalyst/gas interface, in agreement with the observation known from electrochemical promotion practice that positive polarization of a rhodium electrode leads to rhodium oxide reduction, hence, to dramatic increase in catalytic reaction rat

Electrochemical polymerisation of phenol in aqueous solution on a Ta/PbO2 anode

This paper deals with the treatment of aqueous phenol solutions using an electrochemical technique. Phenol can be partly eliminated from aqueous solution by electrochemically initiated polymerisation. Galvanostatic electrolyses of phenol solutions at concentration up to 0.1 mol dm−3 were carried out on a Ta/PbO2 anode. The polymers formed are insoluble in acidic medium but soluble in alkaline. These polymers were filtered and then dissolved in aqueous solution of sodium hydroxide (1 mol dm−3). The polymers formed were quantified by total organic carbon (TOC) measurement. It was found that the conversion of phenol into polymers increases as a function of initial concentration, anodic current density, temperature, and solution pH. The percentage of phenol polymerised can reach 15%

Electrosynthesis of trimethylorthoformate on BDD electrodes

The anodic methoxylation of formaldehyde dimethylacetal (FADMA) to trimethylorthoformate (TMOF) in basic methanol was investigated on boron-doped diamond (BDD) electrodes. Cyclic voltammetry and preparative electrolysis have shown that FADMA is electrochemically inactive in the solvent stability region; nevertheless FADMA can be oxidized in the potential region of methanol oxidation. A reaction scheme involving intermediates of methanol oxidation (methoxy radicals) has been propose

The phenomenon of "permanent” electrochemical promotion of catalysis (P-EPOC)

The phenomenon of electrochemical promotion of catalysis (EPOC) is most often fully reversible. Subsequent to long-lasting polarization, however, the new steady-state open-circuit catalytic activity after current interruption may remain significantly higher than that before polarization. This phenomenon, discovered in our laboratory in the late 1990s and called permanent electrochemical promotion of catalysis (P-EPOC), has been observed on both oxide (IrO2, RuO2) and metal (Rh) catalysts. P-EPOC is out of the state-of-the-art model of reversible EPOC, which considers the gas-exposed catalyst surface as the unique location of charge storage via backspillover of electrochemically generated promoter species accompanied by their consumption in the catalytic reaction (‘sacrificial' promoter). Double step chronoamperometric and linear sweep voltammetric characterization of Pt catalyst deposited on YSZ solid electrolyte revealed the existence of a somewhat delayed oxygen storage occurring at the vicinity of the catalyst/electrolyte interface during prolonged anodic polarization. It is proposed that oxygen stored at this location, hidden for the reactant, and then released during relaxation was at the origin of P-EPOC on the Pt/YSZ catalyst observed in catalytic combustion of ethylene with oxygen. The effect of this ‘hidden' promoter on the catalytic reaction rate was found to be highly non-Faradai

Charge storage at the Pt/YSZ interface

The electrochemical behavior of Pt/YSZ electrodes in oxygen containing atmosphere at 450°C has been investigated by double-step chronoamperometry and programmed linear sweep cyclic voltammetry. The response of the O2(g),Pt/YSZ system in these experiments could be separated into a time dependent and a steady state contribution, the former being dominated by pseudocapacitive processes. It is proposed that Pt-O type species were stored via different processes at three different locations in the O2(g),Pt/YSZ system: (1) Build-up of a platinum oxide monolayer at the Pt/YSZ binary interface. (2) Formation of Pt-O species at the triple phase boundary and their spreading-out along the Pt/gas interface. (3) Growth of the platinum oxide layer from the binary Pt/YSZ interface toward the bulk of the platinum electrod