President's message for May: Convention at New Orleans, May 8–9, 1922

n/

pp-sdsd shell gap reduction in neutron-rich systems and cross-shell excitations in 20^{20}O

Excited states in $^{20}$O were populated in the reaction $^{10}$Be($^{14}$C,$\alpha$) at Florida State University. Charged particles were detected with a particle telescope consisting of 4 annularly segmented Si surface barrier detectors and $\gamma$ radiation was detected with the FSU $\gamma$ detector array. Five new states were observed below 6 MeV from the $\alpha$-$\gamma$ and $\alpha$-$\gamma$-$\gamma$ coincidence data. Shell model calculations suggest that most of the newly observed states are core-excited 1p-1h excitations across the $N = Z = 8$ shell gap. Comparisons between experimental data and calculations for the neutron-rich O and F isotopes imply a steady reduction of the $p$-$sd$ shell gap as neutrons are added

Kinematic differences exist between transtibial amputee fallers and non-fallers during downwards step transitioning.

Stair negotiation is biomechanically more challenging than level gait. There are few biomechanical assessments of transtibial amputees descending stairs and none specifically related to falls. Stair descent may elicit more differences than level gait in amputees with and without a previous falls history

Mars 2020 Perseverance Rover Mast Camera Zoom (Mastcam-Z) Multispectral, Stereoscopic Imaging Investigation

Mastcam-Z is a multispectral, stereoscopic imaging investigation on the Mars 2020 mission’s Perseverance rover. Mastcam-Z consists of a pair of focusable, 4:1 zoomable cameras that provide broadband red/green/blue and narrowband 400-1000 nm color imaging with fields of view from 25.6° × 19.2° (26 mm focal length at 283 μrad/pixel) to 6.2° × 4.6° (110 mm focal length at 67.4 μrad/pixel). The cameras can resolve (≥ 5 pixels) ∼0.7 mm features at 2 m and ∼3.3 cm features at 100 m distance. Mastcam-Z shares significant heritage with the Mastcam instruments on the Mars Science Laboratory Curiosity rover. Each Mastcam-Z camera consists of zoom, focus, and filter wheel mechanisms and a 1648 × 1214 pixel charge-coupled device detector and electronics. The two Mastcam-Z cameras are mounted with a 24.4 cm stereo baseline and 2.3° total toe-in on a camera plate ∼2 m above the surface on the rover’s Remote Sensing Mast, which provides azimuth and elevation actuation. A separate digital electronics assembly inside the rover provides power, data processing and storage, and the interface to the rover computer. Primary and secondary Mastcam-Z calibration targets mounted on the rover top deck enable tactical reflectance calibration. Mastcam-Z multispectral, stereo, and panoramic images will be used to provide detailed morphology, topography, and geologic context along the rover’s traverse; constrain mineralogic, photometric, and physical properties of surface materials; monitor and characterize atmospheric and astronomical phenomena; and document the rover’s sample extraction and caching locations. Mastcam-Z images will also provide key engineering information to support sample selection and other rover driving and tool/instrument operations decisions

Methods for Minimizing the Confounding Effects of Word Length in the Analysis of Phonotactic Probability and Neighborhood Density

This is the author's accepted manuscript. The original is available at http://jslhr.pubs.asha.org/article.aspx?articleid=1781521&resultClick=3Recent research suggests that phonotactic probability (the likelihood of occurrence of a sound sequence) and neighborhood density (the number of words phonologically similar to a given word) influence spoken language processing and acquisition across the lifespan in both normal and clinical populations. The majority of research in this area has tended to focus on controlled laboratory studies rather than naturalistic data such as spontaneous speech samples or elicited probes. One difficulty in applying current measures of phonotactic probability and neighborhood density to more naturalistic samples is the significant correlation between these variables and word length. This study examines several alternative transformations of phonotactic probability and neighborhood density as a means of reducing or eliminating this correlation with word length. Computational analyses of the words in a large database and reanalysis of archival data supported the use of z scores for the analysis of phonotactic probability as a continuous variable and the use of median transformation scores for the analysis of phonotactic probability as a dichotomous variable. Neighborhood density results were less clear with the conclusion that analysis of neighborhood density as a continuous variable warrants further investigation to differentiate the utility of z scores in comparison to median transformation scores. Furthermore, balanced dichotomous coding of neighborhood density was difficult to achieve, suggesting that analysis of neighborhood density as a dichotomous variable should be approached with caution. Recommendations for future application and analyses are discussed

Balancing with Vibration: A Prelude for “Drift and Act” Balance Control

Stick balancing at the fingertip is a powerful paradigm for the study of the control of human balance. Here we show that the mean stick balancing time is increased by about two-fold when a subject stands on a vibrating platform that produces vertical vibrations at the fingertip (0.001 m, 15–50 Hz). High speed motion capture measurements in three dimensions demonstrate that vibration does not shorten the neural latency for stick balancing or change the distribution of the changes in speed made by the fingertip during stick balancing, but does decrease the amplitude of the fluctuations in the relative positions of the fingertip and the tip of the stick in the horizontal plane, A(x,y). The findings are interpreted in terms of a time-delayed “drift and act” control mechanism in which controlling movements are made only when controlled variables exceed a threshold, i.e. the stick survival time measures the time to cross a threshold. The amplitude of the oscillations produced by this mechanism can be decreased by parametric excitation. It is shown that a plot of the logarithm of the vibration-induced increase in stick balancing skill, a measure of the mean first passage time, versus the standard deviation of the A(x,y) fluctuations, a measure of the distance to the threshold, is linear as expected for the times to cross a threshold in a stochastic dynamical system. These observations suggest that the balanced state represents a complex time–dependent state which is situated in a basin of attraction that is of the same order of size. The fact that vibration amplitude can benefit balance control raises the possibility of minimizing risk of falling through appropriate changes in the design of footwear and roughness of the walking surfaces

The Mars 2020 Perseverance Rover Mast Camera Zoom (Mastcam-Z) Multispectral, Stereoscopic Imaging Investigation

Mastcam-Z is a multispectral, stereoscopic imaging investigation on the Mars 2020 mission’s Perseverance rover. Mastcam-Z consists of a pair of focusable, 4:1 zoomable cameras that provide broadband red/green/blue and narrowband 400-1000 nm color imaging with fields of view from 25.6° × 19.2° (26 mm focal length at 283 μrad/pixel) to 6.2° × 4.6° (110 mm focal length at 67.4 μrad/pixel). The cameras can resolve (≥ 5 pixels) ∼0.7 mm features at 2 m and ∼3.3 cm features at 100 m distance. Mastcam-Z shares significant heritage with the Mastcam instruments on the Mars Science Laboratory Curiosity rover. Each Mastcam-Z camera consists of zoom, focus, and filter wheel mechanisms and a 1648 × 1214 pixel charge-coupled device detector and electronics. The two Mastcam-Z cameras are mounted with a 24.4 cm stereo baseline and 2.3° total toe-in on a camera plate ∼2 m above the surface on the rover’s Remote Sensing Mast, which provides azimuth and elevation actuation. A separate digital electronics assembly inside the rover provides power, data processing and storage, and the interface to the rover computer. Primary and secondary Mastcam-Z calibration targets mounted on the rover top deck enable tactical reflectance calibration. Mastcam-Z multispectral, stereo, and panoramic images will be used to provide detailed morphology, topography, and geologic context along the rover’s traverse; constrain mineralogic, photometric, and physical properties of surface materials; monitor and characterize atmospheric and astronomical phenomena; and document the rover’s sample extraction and caching locations. Mastcam-Z images will also provide key engineering information to support sample selection and other rover driving and tool/instrument operations decisions

Anticipated initial results from the NASA Mars 2020 Perseverance Rover Mastcam-Z multispectral, stereoscopic imaging investigation

Mastcam-Z is a high-heritage imaging system aboard NASA's Mars 2020 Perseverance rover that is based on the successful Mastcam investigation on the Mars Science Laboratory (MSL) Curiosity rover. It has all the capabilities of MSL Mastcam, and is augmented by a 4:1 zoom capability that will significantly enhance its stereo imaging performance for science, rover navigation, and in situ instrument and tool placement support. The Mastcam-Z camera heads are a matched pair of zoomable, focusable charge-coupled device (CCD) cameras that collect broad-band Red/green/blue (RGB) or narrow-band visible/near-infrared (VNIR; ~400-1000 nm) multispectral color data as well as direct solar images using neutral density filters. Each camera has a selectable field of view ranging from ~7.7° to ~31.9° diagonally, imaging at pixel scales from 67 to 283 µrad/pix (resolving features ~0.7 mm in size in the near field and ~3.3 cm in size at 100 m) from its position ~2 m above the surface on the Perseverance Remote Sensing Mast (RSM)