The epe-d two year timer

Solid state timing apparatus to disconnect solar cells from batteries after two year perio

Navigational and Environmental Measurement System (NEMS)

The NEMS concept and design were initiated from the need to measure and record positional and environmental information during aircraft flights of developmental science research instrumentation. The unit was designed as a stand-alone system which could serve the needs of instruments whose developmental nature did not justify the cost and complexity of including these measurements within the instrument data system. Initially, the system was comprised of a Loran-C receiver and a portable IBM compatible computer recording position and time. Later, the system was interfaced with the Wallops aircraft inertial navigation system (INS), and various other sensors were supplied and shared by the Goddard science users. Real-time position mapping on video monitors was added for investigator's use and information. In 1987, the use of a Global Positioning System (GPS) receiver was included in some missions. A total configuration of the system and the various sensors which can be incorporated are shown

Josephson junctions in thin and narrow rectangular superconducting strips

I consider a Josephson junction crossing the middle of a thin rectangular superconducting strip of length L and width W subjected to a perpendicular magnetic induction B. I calculate the spatial dependence of the gauge-invariant phase difference across the junction and the resulting B dependence of the critical current Ic(B).Comment: 4 pages, 6 figures, revised following referee's comment

TeV Gamma Rays from Geminga and the Origin of the GeV Positron Excess

The Geminga pulsar has long been one of the most intriguing MeV-GeV gamma-ray point sources. We examine the implications of the recent Milagro detection of extended, multi-TeV gamma-ray emission from Geminga, finding that this reveals the existence of an ancient, powerful cosmic-ray accelerator that can plausibly account for the multi-GeV positron excess that has evaded explanation. We explore a number of testable predictions for gamma-ray and electron/positron experiments (up to ~100 TeV) that can confirm the first "direct" detection of a cosmic-ray source.Comment: 4 pages and 3 figures; Minor revisions, accepted for publication in Physical Review Letter

Detection of the Vortex Dynamic Regimes in MgB2 by Third Harmonic AC Susceptibility Measurements

In a type-II superconductor the generation of higher harmonics in the magnetic response to an alternating magnetic field is a consequence of the non-linearity in the I-V relationship. The shape of the current-voltage (I-V) curve is determined by the current dependence of the thermal activation energy U(J) and is thus related to the dynamical regimes governing the vortex motion. In order to investigate the vortex dynamics in MgB2 bulk superconductors we have studied the fundamental (chi1) and third (chi3) harmonics of the ac magnetic susceptibility. Measurements have been performed as a function of the temperature and the dc magnetic field, up to 9 T, for various frequencies and amplitudes of the ac field. We show that the analysis of the behaviour in frequency of chi3(T) and chi3(B) curves can provide clear information about the non-linearity in different regions of the I-V characteristic. By comparing the experimental curves with numerical simulations of the non-linear diffusion equation for the magnetic field we are able to resolve the crossover between a dissipative regime governed by flux creep and one dominated by flux flow phenomena.Comment: to be published in "Horizons in Superconductivity Research" (Nova Science Publishers, Inc., NY, 2003

Force measurements of a superconducting-film actuator for a cryogenic interferometric gravitational-wave detector

We measured forces applied by an actuator with a YBCO film at near 77 K for the Large-scale Cryogenic Gravitational-wave Telescope (LCGT) project. An actuator consisting of both a YBCO film of 1.6 micrometers thickness and 0.81 square centimeters area and a solenoid coil exerted a force of up to 0.2 mN on a test mass. The presented actuator system can be used to displace the mirror of LCGT for fringe lock of the interferometer.Comment: 9 pages, 3 figure

Magnetostrictive behaviour of thin superconducting disks

Flux-pinning-induced stress and strain distributions in a thin disk superconductor in a perpendicular magnetic field is analyzed. We calculate the body forces, solve the magneto-elastic problem and derive formulas for all stress and strain components, including the magnetostriction $\Delta R/R$. The flux and current density profiles in the disk are assumed to follow the Bean model. During a cycle of the applied field the maximum tensile stress is found to occur approximately midway between the maximum field and the remanent state. An effective relationship between this overall maximum stress and the peak field is found.Comment: 8 pages, 6 figures, submitted to Supercond. Sci. Technol., Proceed. of MEM03 in Kyot

Response of thin-film SQUIDs to applied fields and vortex fields: Linear SQUIDs

In this paper we analyze the properties of a dc SQUID when the London penetration depth \lambda is larger than the superconducting film thickness d. We present equations that govern the static behavior for arbitrary values of \Lambda = \lambda^2/d relative to the linear dimensions of the SQUID. The SQUID's critical current I_c depends upon the effective flux \Phi, the magnetic flux through a contour surrounding the central hole plus a term proportional to the line integral of the current density around this contour. While it is well known that the SQUID inductance depends upon \Lambda, we show here that the focusing of magnetic flux from applied fields and vortex-generated fields into the central hole of the SQUID also depends upon \Lambda. We apply this formalism to the simplest case of a linear SQUID of width 2w, consisting of a coplanar pair of long superconducting strips of separation 2a, connected by two small Josephson junctions to a superconducting current-input lead at one end and by a superconducting lead at the other end. The central region of this SQUID shares many properties with a superconducting coplanar stripline. We calculate magnetic-field and current-density profiles, the inductance (including both geometric and kinetic inductances), magnetic moments, and the effective area as a function of \Lambda/w and a/w.Comment: 18 pages, 20 figures, revised for Phys. Rev. B, the main revisions being to denote the effective flux by \Phi rather than

c-axis electrodynamics of ybco

New measurements of surface impedance in ybco show that the c-axis penetration depth and conductivity below Tc exhibit behaviour different from that observed in the planes. The c-axis penetration depth never has the linear temperature dependence seen in the ab-plane. Instead of the conductivity peak seen in the planes, the c-axis microwave conductivity falls to low values in the superconducting state, then rises slightly below 20K. These results show that c-axis transport remains incoherent below Tc, even though this is one of the least anisotropic cuprate superconductors.Comment: 4-page

Thin superconducting disk with B-dependent Jc: Flux and current distributions

The critical state in a superconducting thin circular disk with an arbitrary magnetic field dependence of the critical sheet current, Jc(B), is analyzed. With an applied field Ba perpendicular to the disk, a set of coupled integral equations for the flux and current distributions is derived. The equations are solved numerically, and flux and current profiles are presented graphically for several commonly used Jc(B) dependences. It is shown that for small Ba the flux penetration depth can be described by an effective Bean model with a renormalized Jc entering the leading term. We argue that these results are qualitatively correct for thin superconductors of any shape. The results contrast the parallel geometry behavior, where at small Ba the B-dependence of the critical current can be ignored.Comment: RevTeX, 7 pages including 8 figure