Circularly polarised planar antenna excited by coplanar waveguide feedline

International audienceA circular patch antenna fed by a coplanar waveguide (CPW) line is proposed to obtain circular polarisation (CP). The CP results from the combined excitation of the patch by an inclined slot (integrated in the CPW feedline) and the CPW feedline termination. The asymmetrical characteristics of the excitation involve the excitation of both the odd and the even modes in the CPW line

Circularly polarized microstrip antenna coupled on an asymmetrical cross coplanar slot

A new compact multilayer planar structure is proposed to obtain circular polarization (CP) for the direct broadcast satellite (DBS) reception applications. The use of a circular planar antenna fed by asymmetrical coupling slot integrated on a coplanar−waveguide (CPW) feed line allows to achieve a 3dB axial ratio (AR) bandwidth greater than 2% and a −10dB reflection coefficient bandwidth greater than 20%. The antenna design is presented and the comparison between simulations and experimental results are done

Reconfigurable circularly polarized antenna for short-range communication systems

This paper describes the design rules of a compact microstrip patch antenna with polarization reconfigurable features (right-handed circular polarization (CP)/left-handed CP). The basic antenna is a circular coplanar-waveguide (CPW)-fed microstrip antenna excited by a diagonal slot and the CPW open end. This device is developed for short-range communications or contactless identification systems requiring polarization reconfigurability to optimize the link reliability. First, experimental and simulated results are presented for the passive version of the antenna excited by an asymmetric slot. A reconfigurable antenna using beam-lead p-i-n diodes to switch the polarization sense is then simulated with an electrical modeling of the diodes. Finally, the efficiency reduction resulting from the diode losses is discussed

CPW-fed patch antenna with switchable polarization sense

This paper presents the design and development of a CPW-fed microstrip patch antenna with polarization reconfigurability (RHCP/LHCP). The basic antenna is a circular microstrip antenna excited by a CPW-fed diagonal slot and a CPW open end. First, experimental and simulated results are presented for the passive antenna. Then, an active antenna using beam-lead PIN diodes to switch the polarization sense is proposed. Simulations are presented including electrical parameters for the diode modeling. The deviation between simulated and experimental results is finally discusse

Angular and Current-Target Correlations in Deep Inelastic Scattering at HERA

Correlations between charged particles in deep inelastic ep scattering have been studied in the Breit frame with the ZEUS detector at HERA using an integrated luminosity of 6.4 pb-1. Short-range correlations are analysed in terms of the angular separation between current-region particles within a cone centred around the virtual photon axis. Long-range correlations between the current and target regions have also been measured. The data support predictions for the scaling behaviour of the angular correlations at high Q2 and for anti-correlations between the current and target regions over a large range in Q2 and in the Bjorken scaling variable x. Analytic QCD calculations and Monte Carlo models correctly describe the trends of the data at high Q2, but show quantitative discrepancies. The data show differences between the correlations in deep inelastic scattering and e+e- annihilation.Comment: 26 pages including 10 figures (submitted to Eur. J. Phys. C

Measurement of inclusive D*+- and associated dijet cross sections in photoproduction at HERA

Inclusive photoproduction of D*+- mesons has been measured for photon-proton centre-of-mass energies in the range 130 < W < 280 GeV and a photon virtuality Q^2 < 1 GeV^2. The data sample used corresponds to an integrated luminosity of 37 pb^-1. Total and differential cross sections as functions of the D* transverse momentum and pseudorapidity are presented in restricted kinematical regions and the data are compared with next-to-leading order (NLO) perturbative QCD calculations using the "massive charm" and "massless charm" schemes. The measured cross sections are generally above the NLO calculations, in particular in the forward (proton) direction. The large data sample also allows the study of dijet production associated with charm. A significant resolved as well as a direct photon component contribute to the cross section. Leading order QCD Monte Carlo calculations indicate that the resolved contribution arises from a significant charm component in the photon. A massive charm NLO parton level calculation yields lower cross sections compared to the measured results in a kinematic region where the resolved photon contribution is significant.Comment: 32 pages including 6 figure

Plastisol Foaming Process. Decomposition of the Foaming Agent, Polymer Behavior in the Corresponding Temperature Range and Resulting Foam Properties

The decomposition of azodicarbonamide, used as foaming agent in PVC - plasticizer (1/1) plastisols was studied by DSC. Nineteen different plasticizers, all belonging to the ester family, two being polymeric (polyadipates), were compared. The temperature of maximum decomposition rate (in anisothermal regime at 5 K min-1 scanning rate), ranges between 434 and 452 K. The heat of decomposition ranges between 8.7 and 12.5 J g -1. Some trends of variation of these parameters appear significant and are discussed in terms of solvent (matrix) and viscosity effects on the decomposition reactions. The shear modulus at 1 Hz frequency was determined at the temperature of maximum rate of foaming agent decomposition, and differs significantly from a sample to another. The foam density was determined at ambient temperature and the volume fraction of bubbles was used as criterion to judge the efficiency of the foaming process. The results reveal the existence of an optimal shear modulus of the order of 2 kPa that corresponds roughly to plasticizer molar masses of the order of 450 ± 50 g mol-1. Heavier plasticizers, especially polymeric ones are too difficult to deform. Lighter plasticizers such as diethyl phthalate (DEP) deform too easily and presumably facilitate bubble collapse

D* Production in Deep Inelastic Scattering at HERA

This paper presents measurements of D^{*\pm} production in deep inelastic scattering from collisions between 27.5 GeV positrons and 820 GeV protons. The data have been taken with the ZEUS detector at HERA. The decay channel $D^{*+}\to (D^0 \to K^- \pi^+) \pi^+$ (+ c.c.) has been used in the study. The $e^+p$ cross section for inclusive D^{*\pm} production with $5<Q^2<100 GeV^2$ and $y<0.7$ is 5.3 \pms 1.0 \pms 0.8 nb in the kinematic region {$1.3<p_T(D^{*\pm})<9.0$ GeV and $| \eta(D^{*\pm}) |<1.5$}. Differential cross sections as functions of p_T(D^{*\pm}), $\eta(D^{*\pm}), W$ and $Q^2$ are compared with next-to-leading order QCD calculations based on the photon-gluon fusion production mechanism. After an extrapolation of the cross section to the full kinematic region in p_T(D^{*\pm}) and $\eta$(D^{*\pm}), the charm contribution $F_2^{c\bar{c}}(x,Q^2)$ to the proton structure function is determined for Bjorken $x$ between 2 $\cdot$ 10$^{-4}$ and 5 $\cdot$ 10$^{-3}$.Comment: 17 pages including 4 figure