Bronchioloalveolar carcinoma

AbstractBronchioloalveolar carcinoma is a subtype of adenocarcinoma of the lung with a relatively better prognosis. We reviewed the cases of 50 consecutive patients with bronchioloalveolar carcinoma treated during a 10-year period and attempted to analyze factors related to prognosis. During the 10-year study period, the prevalence of bronchioloalveolar carcinoma relative to adenocarcinoma of the lung remained steady. The subjects included 32 male and 18 female patients with mean ages of 64.7 years and 55.1 years, respectively (p = 0.0030). The preoperative radiographic findings included 40 cases of localized and 10 cases of diffuse bronchioloalveolar carcinoma. The clinicopathologic TNM staging included 20 patients with stage I cancer, 4 with stage II cancer, 11 with stage IIIa cancer, 3 with stage IIIb cancer, and 12 with stage IV cancer. Forty patients with clinical stage I, II, or III disease underwent operation (operability 80%). The resectability rate was 90% (36 of 40). Thirty-four procedures were considered as curative. The overall cumulative survival at 5 years was 22.2% (46.4% for stage I). Different TNM stages showed significant differences in survival time (p = 0.0001). The median survival times were 64.6 months for stage I, 48.0 months for stage II, 24.7 months for stage IIIa, 9.0 months for stage IIIb, and 4.5 months for stage IV disease. The median survival time for localized bronchioloalveolar carcinoma was 27.5 months, and the median survival time for diffuse bronchioloalveolar carcinoma was 4.3 months (p = 0.0002). The median survival time for the curative resection group was 30.6 months, and the median survival time for the noncurative resection or nonresection group was 5.8 months (p = 0.0001). On the basis of this study we conclude that (1) the prevalence of bronchioloalveolar carcinoma is quite steady, (2) bronchioloalveolar carcinoma presents at an earlier age in women, (3) bronchioloalveolar carcinoma frequently presents with lymphatic spread or systemic metastasis at diagnosis, (4) most localized bronchioloalveolar carcinomas are resectable and the prognosis with this type is better than that of the diffuse type, and (5) long-term survival correlates closely with initial roentgenographic appearance, TNM stage, and completeness of surgical resection. (J THORAC CARDIOVASC SURG 1995;110:374-81

Obstacle-Resistant Deployment Algorithms for Wireless Sensor Networks

[[abstract]]Node deployment is an important issue in wireless sensor networks (WSNs). Sensor nodes should be efficiently deployed in a predetermined region in a low-cost and high-coverage-quality manner. Random deployment is the simplest way to deploy sensor nodes but may cause unbalanced deployment and, therefore, increase hardware costs and create coverage holes. This paper presents the efficient obstacle-resistant robot deployment (ORRD) algorithm, which involves the design of a node placement policy, a serpentine movement policy, obstacle-handling rules, and boundary rules. By applying the proposed ORRD, the robot rapidly deploys a near-minimal number of sensor nodes to achieve full sensing coverage, even though there exist unpredicted obstacles with regular or irregular shapes. Performance results reveal that ORRD outperforms the existing robot deployment mechanism in terms of power conservation and obstacle resistance and, therefore, achieves better deployment performance.[[incitationindex]]SC

Degradation of phenolic compounds in water by non-thermal plasma treatment

A stainless-steel hollow needle type anode was used in the reactor to treat industrial wastewater by gas-liquid phase non-thermal plasma by corona discharge. The results showed that the short electrode gap, 1 cm, has a higher plasma energy density which improves the removal of the phenolic derivatives, reaching 100% after about 60 min. The H₂O₂ concentration was higher in the discharge system when the content of oxygen was increased. The efficiency of the phenol removal by chemical oxygen demand was only 10 – 31% after 60 minutes. The identifie dinterme diates were catechol, hydroquinone,1,4-benzoquinone, 2-nitrophenol,1,2-benzenedicarboxylic acid, diphenylmethanone, 2-methyl-hydroquinone, 2-methyl-1,4-bezoquinone, and trace amounts of organic

Dermoscopic characterization and image study of a Sister Mary Joseph nodule in a patient with esophageal cancer

AbstractA Sister Mary Joseph nodule (SMJN) is rare cutaneous metastasis spreading to the umbilicus. It originates mostly from an intra-abdominal or pelvic malignancy and is an ominous sign. In this paper, we report a case of a SMJN in a 64-year-old man with esophageal cancer. We recorded his clinical progression, radiologic and nuclear scintigraphic images, and histopathologic and dermoscopic findings. The image study provided information on the localization of the SMJN and dermoscopy showed a polymorphous vascular pattern. The patient received palliative therapy because of terminal disease

A Study on the Effect of Design Factors of Slim Keyboard's Tactile Feedback

With the rapid development of computer technology, the design of computers and keyboards moves towards a trend of slimness. The change of mobile input devices directly influences users' behavior. Although multi-touch applications allow entering texts through a virtual keyboard, the performance, feedback, and comfortableness of the technology is inferior to traditional keyboard, and while manufacturers launch mobile touch keyboards and projection keyboards, the performance has not been satisfying. Therefore, this study discussed the design factors of slim pressure-sensitive keyboards. The factors were evaluated with an objective (accuracy and speed) and a subjective evaluation (operability, recognition, feedback, and difficulty) depending on the shape (circle, rectangle, and L-shaped), thickness (flat, 3mm, and 6mm), and force (35±10g, 60±10g, and 85±10g) of the keyboard. Moreover, MANOVA and Taguchi methods (regarding signal-to-noise ratios) were conducted to find the optimal level of each design factor. The research participants, by their typing speed (30 words/ minute), were divided in two groups. Considering the multitude of variables and levels, the experiments were implemented using the fractional factorial design. A representative model of the research samples were established for input task testing. The findings of this study showed that participants with low typing speed primarily relied on vision to recognize the keys, and those with high typing speed relied on tactile feedback that was affected by the thickness and force of the keys. In the objective and subjective evaluation, a combination of keyboard design factors that might result in higher performance and satisfaction was identified (L-shaped, 3mm, and 60±10g) as the optimal combination. The learning curve was analyzed to make a comparison with a traditional standard keyboard to investigate the influence of user experience on keyboard operation. The research results indicated the optimal combination provided input performance to inferior to a standard keyboard. The results could serve as a reference for the development of related products in industry and for applying comprehensively to touch devices and input interfaces which are interacted with people

A Study on the Effect of Design Factors of Slim Keyboard's Tactile Feedback

With the rapid development of computer technology, the design of computers and keyboards moves towards a trend of slimness. The change of mobile input devices directly influences users' behavior. Although multi-touch applications allow entering texts through a virtual keyboard, the performance, feedback, and comfortableness of the technology is inferior to traditional keyboard, and while manufacturers launch mobile touch keyboards and projection keyboards, the performance has not been satisfying. Therefore, this study discussed the design factors of slim pressure-sensitive keyboards. The factors were evaluated with an objective (accuracy and speed) and a subjective evaluation (operability, recognition, feedback, and difficulty) depending on the shape (circle, rectangle, and L-shaped), thickness (flat, 3mm, and 6mm), and force (35±10g, 60±10g, and 85±10g) of the keyboard. Moreover, MANOVA and Taguchi methods (regarding signal-to-noise ratios) were conducted to find the optimal level of each design factor. The research participants, by their typing speed (30 words/ minute), were divided in two groups. Considering the multitude of variables and levels, the experiments were implemented using the fractional factorial design. A representative model of the research samples were established for input task testing. The findings of this study showed that participants with low typing speed primarily relied on vision to recognize the keys, and those with high typing speed relied on tactile feedback that was affected by the thickness and force of the keys. In the objective and subjective evaluation, a combination of keyboard design factors that might result in higher performance and satisfaction was identified (L-shaped, 3mm, and 60±10g) as the optimal combination. The learning curve was analyzed to make a comparison with a traditional standard keyboard to investigate the influence of user experience on keyboard operation. The research results indicated the optimal combination provided input performance to inferior to a standard keyboard. The results could serve as a reference for the development of related products in industry and for applying comprehensively to touch devices and input interfaces which are interacted with people

Disordered Fe vacancies and superconductivity in potassium-intercalated iron selenide (K2-xFe4+ySe5)

The parent compound of an unconventional superconductor must contain unusual correlated electronic and magnetic properties of its own. In the high-Tc potassium intercalated FeSe, there has been significant debate regarding what the exact parent compound is. Our studies unambiguously show that the Fe-vacancy ordered K2Fe4Se5 is the magnetic, Mott insulating parent compound of the superconducting state. Non-superconducting K2Fe4Se5 becomes a superconductor after high temperature annealing, and the overall picture indicates that superconductivity in K2-xFe4+ySe5 originates from the Fe-vacancy order to disorder transition. Thus, the long pending question whether magnetic and superconducting state are competing or cooperating for cuprate superconductors may also apply to the Fe-chalcogenide superconductors. It is believed that the iron selenides and related compounds will provide essential information to understand the origin of superconductivity in the iron-based superconductors, and possibly to the superconducting cuprates

Optimizing Human Synovial Fluid Preparation for Two-Dimensional Gel Electrophoresis

<p>Abstract</p> <p>Background</p> <p>Proteome analysis is frequently applied in identifying the proteins or biomarkers in knee synovial fluids (SF) that are associated with osteoarthritis and other arthritic disorders. The 2-dimensional gel electrophoresis (2-DE) is the technique of choice in these studies. Disease biomarkers usually appear in low concentrations and may be masked by high abundant proteins. Therefore, the main aim of this study was to find the most suitable sample preparation method that can optimize the expression of proteins on 2-DE gels that can be used to develop a reference proteome picture for non-osteoarthritic knee synovial fluid samples. Proteome pictures obtained from osteoarthritic knee synovial fluids can then be compared with the reference proteome pictures obtained in this study to assist us in identifying the disease biomarkers more correctly.</p> <p>Results</p> <p>The proteomic tool of 2-DE with immobilized pH gradients was applied in this study. A total of 12 2-DE gel images were constructed from SF samples that were free of osteoarthritis. In these samples, 3 were not treated with any sample preparation methods, 3 were treated with acetone, 3 were treated with 2-DE Clean-Up Kit, and 3 were treated with the combination of acetone and 2-D Clean-Up Kit prior to 2-DE analysis. Gel images were analyzed using the PDQuest Basic 8.0.1 Analytical software. Protein spots that were of interest were excised from the gels and sent for identification by mass spectrometry. Total SF total protein concentration was calculated to be 21.98 ± 0.86 mg/mL. The untreated SF samples were detected to have 456 ± 33 protein spots on 2-DE gel images. Acetone treated SF samples were detected to have 320 ± 28 protein spots, 2-D Clean-Up Kit treated SF samples were detected to have 413 ± 31 protein spots, and the combined treatment method of acetone and 2-D Clean-Up Kit was detected to have 278 ± 26 protein spots 2-DE gel images. SF samples treated with 2-D Clean-Up Kit revealed clearer presentation of the isoforms and increased intensities of the less abundant proteins of haptoglobin, apolipoprotein A-IV, prostaglandin-D synthase, alpha-1B-glycoprotein, and alpha-2-HS-glycoprotein on 2-DE gel images as compared with untreated SF samples and SF samples treated with acetone.</p> <p>Conclusions</p> <p>The acetone precipitation method and the combined treatment effect of acetone and 2-DE Clean-Up Kit are not preferred in preparing SF samples for 2-DE analysis as both protein intensities and numbers decrease significantly. On the other hand, 2-D Clean-Up Kit treated SF samples revealed clearer isoforms and higher intensities for the less abundant proteins of haptoglobin, apolipoprotein A-IV, prostaglandin-D synthase, alpha-1B-glycoprotein, and alpha-2-HS-glycoprotein on 2-DE gels. As a result, it is recommended that SF samples should be treated with protein clean up products such as 2-D Clean-Up Kit first before conducting proteomic research in searching for the relevant biomarkers associated with knee osteoarthritis.</p

Adaptive Momentum-Based Motion Detection Approach and Its Application on Handoff in Wireless Networks

Positioning and tracking technologies can detect the location and the movement of mobile nodes (MNs), such as cellular phone, vehicular and mobile sensor, to predict potential handoffs. However, most motion detection mechanisms require additional hardware (e.g., GPS and directed antenna), costs (e.g., power consumption and monetary cost) and supply systems (e.g., network fingerprint server). This paper proposes a Momentum of Received Signal Strength (MRSS) based motion detection method and its application on handoff. MRSS uses the exponentially weighted moving average filter with multiple moving average window size to analyze the received radio signal. With MRSS, an MN can predict its motion state and make a handoff trigger at the right time without any assistance from positioning systems. Moreover, a novel motion state dependent MRSS scheme called Dynamic MRSS (DMRSS) algorithm is proposed to adjust the motion detection sensitivity. In our simulation, the MRSS- and DMRSS-based handoff algorithms can reduce the number of unnecessary handoffs up to 44% and save battery power up to 75%

(Benzophenone imine-κN)­chlorido(hydrido­tripyrazolyl­borato)­(triphenyl­phosphine)ruthenium(II) diethyl ether solvate

The reaction of RuCl(Tp)(Ph3P)2, where Tp is [(CH)3N2]3BH, with benzophenone imine leads to the formation of the title compound, [Ru(C9H10BN6)Cl(C13H11N)(C18H15P)]·C4H10O. The environment about the Ru atom corresponds to a slightly distorted octa­hedron and the bite angle of the Tp ligand produces an average N—Ru—N angle of 86.3 (9)°. The three Ru—N(Tp) bond lengths [2.117 (2), 2.079 (2) and 2.084 (2) Å] are slightly longer than the average distance (2.038 Å) in other ruthenium–Tp complexes