A Chemometrical Approach for Vinegar Classification by Headspace Mass Spectrometry of Volatile Compounds

n/

Pinus cembra L. tree-ring data as a proxy for summer mass-balance variability of the Careser Glacier (Italian Rhaetian Alps)

Glacial extent and mass-balance are sensitive climate proxies providing solid information on past climatic conditions. However, series of annual mass balance measurements of more than sixty years are scarce. To our knowledge, this is the first time the latewood density data (MXD) of the Swiss stone pine (Pinus cembra L.) has been used to reconstruct the summer mass balance (Bs) of an Alpine glacier. The MXD-based Bs well correlates with a Bs reconstruction based on the May to September temperature. Winter precipitation has been used as independent proxy to infer the winter mass balance and to obtain an annual mass balance (Bn) estimate dating back to the glaciological year 1811/12. The reconstructed MXD/precipitation-based Bn well correlates with the data both of the Careser and of other Alpine glaciers measured by the glaciological method. A number of critical issues should be considered in both proxies including nonlinear response of glacial mass balance to temperature, bedrock topography, ice thinning and fragmentation, MXD acquisition and standardization methods, and finally the “divergence problem” responsible for the recent reduced dendroglaciological reconstructions using this stable and reliable proxy

A long-term chronology of Pinus pinea L. from Parco della Versiliana (Pietrasanta, Italy) derived from treefall induced by a windstorm on March 4th-5th, 2015

Abstract Pinewoods are distinctive environmental elements in the Mediterranean coastal area and have both natural and historical significance. From the evening of March 4th to the morning of March 5th, 2015, a severe and unusual windstorm occurred in the Tuscany region of central Italy with wind gusts over 120 km/h. The windstorm caused vast damage to the anthropic and natural environment and wounded numerous trees in the renowned pinewoods of Parco della Versiliana in the Tyrrhenian coastal area. The meteorological calamity provided the opportunity to i) date the onset of the artificial plantation of the present Italian stone pine (Pinus pinea L.) forest to the 1820s, ii) build a long-term tree-ring chronology of the Italian stone pines in the area and iii) analyze the climate-growth relationship of the Italian stone pine in the study area. The resulting Versiliana chronology was derived from 60 trees and spanned from 1828 to 2014 (187 years), representing one of the longest living Italian stone pine forests on the Italian Peninsula. Finally, the climate-growth analysis highlighted that at this site the latewood width is positively influenced by summer temperature, a peculiarity worthy of further investigations

A Pinus cembra L. tree-ring record for late spring to late summer temperature in the Rhaetian Alps, Italy

Abstract Ongoing climate change strongly affects high-elevation environments in the European Alps, influencing the cryosphere and the biosphere and causing widespread retreat of glaciers and changes in biomes. Nevertheless, high-elevation areas often lack long meteorological series, and global datasets cannot represent local variations well. Thus, proxy data, such as tree rings, provide information on past climatic variations from these remote sites. Although maximum latewood density (MXD) chronologies provide better temperature information than those based on tree-ring width (TRW), MXD series from the European Alps are lacking. To derive high-quality temperature information for the Rhaetian Alps, Pinus cembra L. trees sampled at approximately 2000 m a.s.l. were used to build one MXD chronology spanning from 1647 to 2015. The MXD data were significantly and highly correlated with seasonal May-September mean temperatures. The MXD chronology showed a generally positive trend since the middle of the 19th century, interrupted by short phases of climatic deterioration in the beginning of the 20th century and in the 1970s, conforming with the temperature trends. Our results underline the potential for using Pinus cembra L. MXD to reconstruct mean temperature variations, especially during the onset and latter part of the growing season, providing additional information on parts of the growing season not inferred from TRW. Future studies on MXD for this species will increase the availability of temporal and spatial data, allowing detailed climate reconstructions

A New Frontier of Photocatalysis Employing Micro-Sized TiO2: Air/Water Pollution Abatement and Self-Cleaning/ Antibacterial Applications

This chapter presents the use of a commercial micro-sized TiO2 powder as an alternative to the traditional nano-powders as semiconductors in photocatalytic processes. Results of the photocatalytic efficiency towards the photodegradation of the traditional pollutant molecules both in gas phase (nitrogen oxides (NOx) and volatile organic compounds (VOCs)) and in water phase (phenol) are presented and compared to the results obtained with two nano-sized reference powders. Micro-sized TiO2 is also industrially coated at the surfaces of porcelain grés tiles (Active Clean Air and Antibacterial Ceramic™). The possibility to have a photocatalytic material, strongly stuck at the surface of a vitrified tile, increases the use of photocatalysis in real conditions: no problem of filtration of the semiconductor from the liquid medium after use and no risks of leakage of nanoparticles in the atmosphere. Tests were performed using reactors equipped with UV-A lamps and with suitable analytical systems, depending on the final purpose. Characterization data from both powders and coated tiles are put in correlation with the photocatalytic results to understand the semiconductor action during the photocatalytic process. Polluting molecules were chosen in order to cover all the common aspects of environmental pollution: NOx and some VOCs represent the model molecules to test the efficiency of the micro-sized TiO2 (degradation from the pristine molecule to CO2 or inorganic salts) in gas phase. As for the water pollution, phenol was chosen as common pollutant in worldwide rivers. Moreover, tests on self-cleaning and antibacterial properties are also reported. The positive results of micro-sized TiO2 both in powder and coated onto the surface of porcelain grés tiles open the way to new photocatalytic products that do not make use of nanoscale powders avoiding problems to human safety caused by the inherent toxicity of the nanoparticles

Photocatalytic TiO2: From Airless Jet Spray Technology to Digital Inkjet Printing

TiO2 powders can be employed as both photocatalytic and structural materials, leading to applications in external coatings or in interior furnishing devices, including cement mortar, tiles, floorings, and glass supports. The technology of photocatalytic building materials is connected with the widespread production of photocatalytic active tiles. All the techniques proposed in the study involve the employment of nanosized TiO2: this represents a new problem to be dealt with, as inhaling nanoparticles exposes workers during industrial production and people in everyday locations to their dangerousness. Only very recently the employment of microsized TiO2 has been proposed, and the authors in this manuscript report the use of micrometric titania materials, but employing a new deposition technique, which is digital inkjet printing. It represents an improvement of the classical spray coating methods, as it requires piezoelectric heads to precisely direct the deposition of the suspension with an electrostatic field. The mixture contains aqueous/organic components containing micrometric TiO2: to form a suspension, which is printed onto the surface of porcelain grès, large slabs using a digital printer. Many advantages are immediately evident, namely rapid and precise deposition, (almost) no waste of raw materials, thereby highlighting the economy, environmental friendliness, and sustainability of the process. All the materials we obtained have been thoroughly characterized by means of several experimental physico-chemical techniques, such as Raman microspectroscopy and scanning electron microscopy coupled with elemental analysis. Two different model VOCs, ethanol and toluene, and NOx have been selected to test the photocatalytic performances of the abovementioned tiles. Moreover, the antibacterial properties of the tiles have been determined, using Escherichia coli as example. Life cycle assessments (LCAs) for the two processes were modeled for 1 m2 of tiles produced in Modena, Italy. The impact assessments revealed that jet spraying exhibited uniformly greater impacts than digital inkjet printing and that the principal impacts were in human toxicity, cancer effects, freshwater ecotoxicity, and climate change. Most of the impacts were associated with the energy required for the production processes. Further considerations revealed that jet spraying is projected to generate twice as much CO2 and 30% more NOx than digital inkjet printing

Photoactive TiO2-montmorillonite composite for degradation of organic dyes in water

TiO2\u2013montmorillonite composite (TiO2\u2013M) was prepared by impregnation with TiCl4 followed by calcination at 350 C. The synthesized material was characterized by FTIR, TG\u2013DTA, BET, XRD and SEM\u2013 EDX. The results show that TiO2 was efficiently formed in Na\u2013montmorillonite (Na\u2013M) framework, and only a crystalline, pure anatase phase was produced. Photoactivity tests were carried out under UV-A irradiation using five selected organic dyes. The results indicate that the activity of TiO2\u2013M is more important for cationic dyes, where the removal rates are in the order: crystal violet (97.1%) > methylene blue (93.20%) > rhodamine B (79.8%) > methyl orange (36.1%) > Congo red (22.6%). The results of the TiO2\u2013 M activity were compared with that of the commercial P25. The comparison demonstrates that the synthesized TiO2\u2013M exhibits a higher adsorptive behavior and can be used as low-cost alternative to the commercial TiO2 for wastewater treatment, showing also an extreme easiness to completely recover the composite catalyst at the end of the test

Lipoprotein(a) as a Risk Factor for Cardiovascular Diseases: Pathophysiology and Treatment Perspectives

Cardiovascular disease (CVD) is still a leading cause of morbidity and mortality, despite all the progress achieved as regards to both prevention and treatment. Having high levels of lipoprotein(a) [Lp(a)] is a risk factor for cardiovascular disease that operates independently. It can increase the risk of developing cardiovascular disease even when LDL cholesterol (LDL-C) levels are within the recommended range, which is referred to as residual cardiovascular risk. Lp(a) is an LDL-like particle present in human plasma, in which a large plasminogen-like glycoprotein, apolipoprotein(a) [Apo(a)], is covalently bound to Apo B100 via one disulfide bridge. Apo(a) contains one plasminogen-like kringle V structure, a variable number of plasminogen-like kringle IV structures (types 1–10), and one inactive protease region. There is a large inter-individual variation of plasma concentrations of Lp(a), mainly ascribable to genetic variants in the Lp(a) gene: in the general po-pulation, Lp(a) levels can range from 1000 mg/dL. Concentrations also vary between different ethnicities. Lp(a) has been established as one of the risk factors that play an important role in the development of atherosclerotic plaque. Indeed, high concentrations of Lp(a) have been related to a greater risk of ischemic CVD, aortic valve stenosis, and heart failure. The threshold value has been set at 50 mg/dL, but the risk may increase already at levels above 30 mg/dL. Although there is a well-established and strong link between high Lp(a) levels and coronary as well as cerebrovascular disease, the evidence regarding incident peripheral arterial disease and carotid atherosclerosis is not as conclusive. Because lifestyle changes and standard lipid-lowering treatments, such as statins, niacin, and cholesteryl ester transfer protein inhibitors, are not highly effective in reducing Lp(a) levels, there is increased interest in developing new drugs that can address this issue. PCSK9 inhibitors seem to be capable of reducing Lp(a) levels by 25–30%. Mipomersen decreases Lp(a) levels by 25–40%, but its use is burdened with important side effects. At the current time, the most effective and tolerated treatment for patients with a high Lp(a) plasma level is apheresis, while antisense oligonucleotides, small interfering RNAs, and microRNAs, which reduce Lp(a) levels by targeting RNA molecules and regulating gene expression as well as protein production levels, are the most widely explored and promising perspectives. The aim of this review is to provide an update on the current state of the art with regard to Lp(a) pathophysiological mechanisms, focusing on the most effective strategies for lowering Lp(a), including new emerging alternative therapies. The purpose of this manuscript is to improve the management of hyperlipoproteinemia(a) in order to achieve better control of the residual cardiovascular risk, which remains unacceptably high

Bismuth oxyhalides for NOx degradation under visible light: the role of the chloride precursor

ABSTRACT: Photocatalysis is a green technology for tackling water and air contamination. A valid alternative to the most exploited photocatalytic material, TiO2, is bismuth oxyhalides, which feature a wider bandgap energy range and use visible radiation to attain photoexcitation. Moreover, their layered structure favors the separation of photogenerated electron–hole pairs, with an enhancement in photocatalytic activity. Controlled doping of bismuth oxyhalides with metallic bismuth nanoparticles allows for further boosting of the performance of the material. In the present work, we synthesized Y%Bi-doped BiO(Cl0.875Br0.125) (Y = 0.85, 1, 2, 10) photocatalysts, using cetyltrimethylammonium bromide as the bromide source and varying the chloride source to assess the impact that both length and branching of the hydrocarbon chain might have on the framing and layering of the material. A change in the amount of the reducing agent NaBH4 allowed tuning of the percentage of metallic bismuth. After a thorough characterization (XRPD, SEM, TEM, UV-DRS, XPS), the photocatalytic activity of the catalysts was tested in the degradation of NOx under visible light, reaching a remarkable 53% conversion after 3 h of illumination for the material prepared using cetylpyridinium chloride