Improved impact performance of marine sandwich panels using through-thickness reinforcement: Experimental results

This paper presents results from a test developed to simulate the water impact (slamming) loading of sandwich boat structures. A weighted elastomer ball is dropped from increasing heights onto rigidly supported panels until damage is detected. Results from this test indicate that honeycomb core sandwich panels, the most widely used material for racing yacht hulls, start to damage due to core crushing at impact energies around 550 J. Sandwich panels of the same areal weight and with the same carbon/epoxy facings but using a novel foam core reinforced in the thickness direction with pultruded carbon fibre pins, do not show signs of damage until above 1200 J impact energy. This suggests that these will offer significantly improved resistance to wave impact. Quasi-static test results cannot be used to predict impact resistance here as the crush strength of the pinned foam is more sensitive to loading rate than that of the honeycomb core

Contribution à l'étude des propriétés d'un composite PP/lin mis en oeuvre par extrusion

International audienceLe comportement mécanique d'un composite polypropylène (PP) renforcé avec des fibres de lin extrudé sous forme de bande plate a été étudié et comparé à celui du PP/talc. Ces mêmes matériaux ont aussi été injectés et leur propriétés comparées à celles des pièces extrudées. Les propriétés mécaniques et leur microstructure ont été étudiées après transformation. L'utilisation des fibres de lin comme renfort permet de dépasser les propriétés mécaniques du PP/talc tout en permettant une diminution du retrait et de la masse volumique. L'ajout d'anhydride maléique a permis une nette amélioration des performances grâce à l'amélioration de l'interface fibres/matrice. Les matériaux injectés présentent de meilleures caractéristiques mécaniques que ceux extrudés grâce à une meilleure orientation des fibres et une plus faible porosité

Diabetes and lipid screening among patients in primary care: A cohort study

<p>Abstract</p> <p>Background</p> <p>Obesity is associated with increased cardiovascular diseases and diabetes mellitus. Guidelines call for intensified glucose and lipid screening among overweight and obese patients. Data on compliance with these guidelines are scarce. The purpose of this study was to assess rates of diabetes and lipid screening in primary care according to demographic variables and weight status.</p> <p>Methods</p> <p>Over a 3-year follow-up period, we assessed screening rates for blood glucose, triglycerides, and HDL- and LDL-cholesterol among 5025 patients in primary care. From proportional hazards models we estimated screening rates among low, moderate, high, and very-high risk patients and compared them with recommendations of the American Diabetes Association (ADA), National Cholesterol Education Program (ATP III) and U.S. Preventive Services Task Force (USPSTF).</p> <p>Results</p> <p>Mean (SD) age was 47.4 (15.6); 69% were female, 21% were non-white, and 30% of males and 25% of females were obese (BMI ≥ 30 kg/m²). For both diabetes and lipid screening, the adjusted hazard was 260–330% higher among ≥65 than <35 year-olds, 50–90% higher in persons with BMI ≥ 35 than <25 kg/m², 10–30% lower for females than males, and not lower among racial/ethnic minorities. Screening rates were at least 80% among very-high risk persons, which we defined as 55–64 years old, BMI ≥ 35 kg/m², non-white, with baseline hypertension. In contrast, high-risk persons who were younger (35–44 years old) and less obese (BMI 30–<35 kg/m²) were screened less often (43% for LDL-cholesterol among females to 83% for diabetes among males) even though ADA, ATP III and USPSTF recommend diabetes and lipid screening among them.</p> <p>Conclusion</p> <p>Patients with higher BMI or age were more likely to be screened for cardiometabolic risk factors. Women were screened at lower rates than men. Even in a highly structured medical group practice, some obese patients were under-screened for diabetes and dyslipidemia.</p

Strength variability of single flax fibres

Due to the typical large variability in the measured mechanical properties of flax fibres, they are often employed only in low grade composite applications. The present study aims to investigate the reasons for the variability in tensile properties of flax fibres. It is found that an inaccuracy in the determination of the cross-sectional area of the fibres is one major reason for the variability in properties. By applying a typical circular fibre area assumption, a considerable error is introduced into the calculated mechanical properties. Experimental data, together with a simple analytical model, are presented to show that the error is increased when the aspect ratio of the fibre cross-sectional shape is increased. A variability in properties due to the flax fibres themselves is found to originate from the distribution of defects along the fibres. Two distinctive types of stress–strain behaviours (linear and nonlinear) of the fibres are found to be correlated with the amount of defects. The linear stress–strain curves tend to show a higher tensile strength, a higher Young’s modulus, and a lower strain to failure than the nonlinear curves. Finally, the fibres are found to fracture by a complex microscale failure mechanism. Large fracture zones are governed by both surface and internal defects; and these cause cracks to propagate in the transverse and longitudinal directions

Long COVID clinical severity types based on symptoms and functional disability: A longitudinal evaluation

Background: Long COVID (LC) is a multisystem clinical syndrome with functional disability and compromised overall health. Information on LC clinical severity types is emerging in cross-sectional studies. This study explored the pattern and consistency of long COVID (LC) clinical severity types over time in a prospective sample. Methods: Participants with LC completed the condition-specific outcome measure C19-YRSm (Yorkshire Rehabilitation Scale modified version) at two assessment time points. A cluster analysis for clinical severity types was undertaken at both time points using the k-means partition method. Results: The study included cross-sectional data for 759 patients with a mean age of 46.8 years (SD = 12.7), 69.4% females, and a duration of symptoms of 360 days (IQR 217 to 703 days). The cluster analysis at first assessment revealed three distinct clinical severity type clusters: mild (n = 96), moderate (n = 422), and severe (n = 241). Longitudinal data on 356 patients revealed that the pattern of three clinical severity types remained consistent over time between the two assessments, with 51% of patients switching clinical severity types between the assessments. Conclusions: This study is the first of its kind to demonstrate that the pattern of three clinical severity types is consistent over time, with patients also switching between severity types, indicating the fluctuating nature of LC

Review of natural fibre-reinforced hybrid composites

Natural fibre-reinforced hybrid composites which contain one or more types of natural reinforcement are gaining increasing research interest. This paper presents a review of natural fibre-reinforced hybrid composites. Both thermoplastic and thermoset composites reinforced by hybrid/synthetic fibres or hybrid/hybrid fibres are reviewed. The properties of natural fibres, the properties and processing of composites are summarised

Domain formation in DODAB–cholesterol mixed systems monitored via nile red anisotropy

The effect of the cholesterol (Ch) on liposomes composed of the cationic lipid dioctadecyldimethylammonium bromide (DODAB) was assessed by studying both the steady-state and time-resolved fluorescence anisotropy of the dye Nile Red. The information obtained combined with analysis of the steady-state emission and luorescence lifetime of Nile Red (NR) for different cholesterol concentrations (5–50%) elucidated the presence of “condensed complexes” and cholesterol-rich domains in these mixed systems. The steady-state fluorescence spectra were decomposed into the sum of two lognormal emissions, emanating from two different states, and the effect of temperature on the anisotropy decay of Nile Red for different cholesterol concentrations was observed. At room temperature, the time-resolved anisotropy decays are indicative of NR being relatively immobile (manifest by a high r∞ value). At higher temperature, rotational times ca. 1 ns were obtained throughout and a trend in increasing hindrance was seen with increase of Ch content