Balancing Efficiency, Equity, and Voice in Workplace Resolution Procedures

Systems for resolving workplace disputes are very important to workers and firms, and have been the subject of much debate. In the United States, traditional unionized grievance procedures, emerging nonunion dispute resolution systems, and the court-based system for resolving employment law disputes have all been criticized. Much of the existing debate on workplace dispute resolution, however, has been atheoretical, with a focus on techniques of dispute resolution rather than the goals of the system. What is missing from the debate are fundamental standards for comparing and evaluating dispute resolutions systems. In this paper, we develop efficiency, equity, and voice as these standards. Unionized, nonunion, and employment law procedures are then evaluated against these three standards.

Interplay of Mre11 Nuclease with Dna2 plus Sgs1 in Rad51-Dependent Recombinational Repair

The Mre11/Rad50/Xrs2 complex initiates IR repair by binding to the end of a double-strand break, resulting in 5′ to 3′ exonuclease degradation creating a single-stranded 3′ overhang competent for strand invasion into the unbroken chromosome. The nuclease(s) involved are not well understood. Mre11 encodes a nuclease, but it has 3′ to 5′, rather than 5′ to 3′ activity. Furthermore, mutations that inactivate only the nuclease activity of Mre11 but not its other repair functions, mre11-D56N and mre11-H125N, are resistant to IR. This suggests that another nuclease can catalyze 5′ to 3′ degradation. One candidate nuclease that has not been tested to date because it is encoded by an essential gene is the Dna2 helicase/nuclease. We recently reported the ability to suppress the lethality of a dna2Δ with a pif1Δ. The dna2Δ pif1Δ mutant is IR-resistant. We have determined that dna2Δ pif1Δ mre11-D56N and dna2Δ pif1Δ mre11-H125N strains are equally as sensitive to IR as mre11Δ strains, suggesting that in the absence of Dna2, Mre11 nuclease carries out repair. The dna2Δ pif1Δ mre11-D56N triple mutant is complemented by plasmids expressing Mre11, Dna2 or dna2K1080E, a mutant with defective helicase and functional nuclease, demonstrating that the nuclease of Dna2 compensates for the absence of Mre11 nuclease in IR repair, presumably in 5′ to 3′ degradation at DSB ends. We further show that sgs1Δ mre11-H125N, but not sgs1Δ, is very sensitive to IR, implicating the Sgs1 helicase in the Dna2-mediated pathway

miR-9 Acts as an OncomiR in Prostate Cancer through Multiple Pathways That Drive Tumour Progression and Metastasis

Identification of dysregulated microRNAs (miRNAs) in prostate cancer is critical not only for diagnosis, but also differentiation between the aggressive and indolent forms of the disease. miR-9 was identified as an oncomiR through both miRNA panel RT-qPCR as well as high-throughput sequencing analysis of the human P69 prostate cell line as compared to its highly tumorigenic and metastatic subline M12, and found to be consistently upregulated in other prostate cell lines including DU-145 and PC3. While miR-9 has been characterized as dysregulated either as an oncomiR or tumour suppressor in a variety of other cancers including breast, ovarian, and nasopharyngeal carcinomas, it has not been previously evaluated and proven as an oncomiR in prostate cancer. miR-9 was confirmed an oncomiR when found to be overexpressed in tumour tissue as compared to adjacent benign glandular epithelium through laser-capture microdissection of radical prostatectomy biopsies. Inhibition of miR-9 resulted in reduced migratory and invasive potential of the M12 cell line, and reduced tumour growth and metastases in male athymic nude mice. Analysis showed that miR-9 targets e-cadherin and suppressor of cytokine signalling 5 (SOCS5), but not NF-ĸB mRNA. Expression of these proteins was shown to be affected by modulation in expression of miR-9

Extraction of the Axial Nucleon Form Factor from Neutrino Experiments on Deuterium

We present new parameterizations of vector and axial nucleon form factors. We maintain an excellent descriptions of the form factors at low momentum transfers ($Q^2$), where the spatial structure of the nucleon is important, and use the Nachtman scaling variable $\xi$ to relate elastic and inelastic form factors and impose quark-hadron duality constraints at high $Q^2$ where the quark structure dominates. We use the new vector form factors to re-extract updated values of the axial form factor from \numu experiments on deuterium. We obtain an updated world average value from \numud, \numubarH and pion electroproduction experiments of $M_{A}$ = $1.014 \pm 0.014 GeV/c^2$. Our parameterizations are useful in modeling $\nu$ interactions at low energies (e.g. for \numu oscillations experiments). The predictions for high $Q^2$ can be tested in the next generation electron and \numu scattering experiments.Comment: Presented by A. Bodek at the European Physical Society Meeting, EPS2007, Manchester, England, July 2007, 4 pages, 2 figure

Exploiting thermally-reversible covalent bonds for the controlled release of microencapsulated isocyanate crosslinkers

The paper reports the successful synthesis of microcapsules that incorporate thermally-reversible Diels-Alder or oxime-urethane bonds within the polymer of the microcapsule shell using an interfacial polymerisation technique. The mechanical strength of these microcapsules was found to be dependent on the structure of the thermally-reversible functionality, thus allowing for the design of strong microcapsules that demonstrated excellent stability in one-pot PU formulations. Release of the encapsulated isocyanate crosslinkers using a thermal stimulus demonstrated the potential of this technology for use in the controlled polymerisation of one-pot PU systems

PIM-1 membranes containing POSS - graphene oxide for CO2 separation

PIM-1 mixed matrix membranes (MMMs) were fabricated with polyhedral oligomeric silsesquioxane (POSS) and graphene oxide (GO) functionalized with POSS (GO-POSS), and tested for CO2/N2 (single gas) and CO2/CH4 (1:1, v:v gas mixture). The CO2 permeability of the best performing fresh MMM (containing 0.05 wt% GO-POSS) was ~ 12000 Barrer, which is 69% higher than that of the neat PIM-1 membrane, with about the same selectivity (CO2/CH4 selectivity ~ 12 and CO2/N2 selectivity ~ 20). In both cases, the gas separation data surpass the 2008 Robeson upper bound. In addition to the initial CO2 permeability enhancement, the use of GO-POSS is an efficient strategy to slow down physical aging. The MMM at a filler loading of 0.75 wt% showed less than half of the reduction in CO2 permeability than the neat PIM-1 membrane 160 days after preparation (26% for the MMM vs 58% for the purely polymeric one). © 2022 The Author(s

The CSIRO Mk3L climate system model version 1.0 – Part 1: Description and evaluation

The CSIRO Mk3L climate system model is a coupled general circulation model, designed primarily for millennial-scale climate simulations and palaeoclimate research. Mk3L includes components which describe the atmosphere, ocean, sea ice and land surface, and combines computational efficiency with a stable and realistic control climatology. This paper describes the model physics and software, analyses the control climatology, and evaluates the ability of the model to simulate the modern climate. <br><br> Mk3L incorporates a spectral atmospheric general circulation model, a <i>z</i>-coordinate ocean general circulation model, a dynamic-thermodynamic sea ice model and a land surface scheme with static vegetation. The source code is highly portable, and has no dependence upon proprietary software. The model distribution is freely available to the research community. A 1000-yr climate simulation can be completed in around one-and-a-half months on a typical desktop computer, with greater throughput being possible on high-performance computing facilities. <br><br> Mk3L produces realistic simulations of the larger-scale features of the modern climate, although with some biases on the regional scale. The model also produces reasonable representations of the leading modes of internal climate variability in both the tropics and extratropics. The control state of the model exhibits a high degree of stability, with only a weak cooling trend on millennial timescales. Ongoing development work aims to improve the model climatology and transform Mk3L into a comprehensive earth system model

Role of bulk and surface phonons in the decay of metal surface states

We present a comprehensive theoretical investigation of the electron-phonon contribution to the lifetime broadening of the surface states on Cu(111) and Ag(111), in comparison with high-resolution photoemission results. The calculations, including electron and phonon states of the bulk and the surface, resolve the relative importance of the Rayleigh mode, being dominant for the lifetime at small hole binding energies. Including the electron-electron interaction, the theoretical results are in excellent agreement with the measured binding energy and temperature dependent lifetime broadening.Comment: 4 pages, 3 figure

Ranking Objections to Christian Theism: A Survey of Subjective Declarations and their Correlations with Expert Opinions

There have been numerous books written on the top objections to Christianity—sometimes stated as “common,” “major,” “frequent,” “every day,” “cultural,” “tough,” “difficult” objections. However, there is a dearth of behavioral studies in the literature that show how and given population ranks objections to Christianity. As such, the apologist has had to rely on expert opinions from the books that have been authored. These expert opinions are based on familiarity with the literature in the field and contact with laity from university, church, and other speaking engagements. The purpose of this study is to document trends in how people report the relative strength of objections to Christian theism.[1] We analyze whether these trends correlate with popular works of Christian apologists—our baseline for expert opinion. Further, we determine whether there are any statistically significant relationships between reported demographics, rankings, and attitudes. Summary of Results and Analysis. Subjective declarations of respondents of the questionnaire showed that most participants were either 18-24 (marginally more than 55-64 and 65-74), male (marginally more than female), had some college (marginally more than bachelor’s, master’s degrees), lived in a suburban community, or lived in the South. In comparing the expert opinion baseline with the aggregate survey ranking results, we see similar rankings between the objection that “God is unloving/immoral” and that the “Bible is not inerrant” (ranked by both as 1st and 2nd, respectively) at the higher end of the spectrum. We found that those identified as agnostic seem to have the closest potential correlation to expert opinion (baseline). The mean of their rankings produced four objections that closely approximated the baseline, one objection that was about one rank removed from the baseline, and three objections that were about two ranks from the baseline. For demographics and rankings, we found statistically significant relationships between religious identification and the objection “God does not exist” with those who identified as atheists, giving it an average ranking of 3.74 (on a scale of 1-13; 1 = highest, 13 = lowest). For demographics and attitudes, we found statistically significant relationships between religious identification and age, religious discussion importance, and attitude toward Christian theism. (See “Analysis” section.) [1] The study was done under the School of Divinity Department at Liberty University in compliance with Liberty University’s Internal Review Board (Research Ethics Office). IRB-FY21-22-12. Policy: Post-2018 Rule. Submitted 07-06-2021. Last approved 09-07-2021, no expiration date applicable