7,231 research outputs found
Resonant Acoustic Determination of Complex Elastic Moduli
A simple, inexpensive, yet accurate method for measuring the dynamic complex modulus of elasticity is described. Using a 'free-free' bar selectively excited in three independent vibrational modes, the shear modulus is obtained by measuring the frequency of the torsional resonant mode and the Young's modulus is determined from measurement of either the longitudinal or flexural mode. The damping properties are obtained by measuring the quality factor (Q) for each mode. The Q is inversely proportional to the loss tangent. The viscoelastic behavior of the sample can be obtained by tracking a particular resonant mode (and thus a particular modulus) using a phase locked loop (PLL) and by changing the temperature of the sample. The change in the damping properties is obtained by measuring the in-phase amplitude of the PLL which is proportional to the Q of the material. The real and imaginary parts or the complex modulus can be obtained continuously as a function of parameters such as temperature, pressure, or humidity. For homogeneous and isotropic samples only two independent moduli are needed in order to characterize the complete set of elastic constants, thus, values can be obtained for the dynamic Poisson's ratio, bulk modulus, Lame constants, etc
Fiber-optic push-pull sensor systems
Fiber-optic push-pull sensors are those which exploit the intrinsically differential nature of an interferometer with concommitant benefits in common-mode rejection of undesired effects. Several fiber-optic accelerometer and hydrophone designs are described. Additionally, the recent development at the Naval Postgraduate School of a passive low-cost interferometric signal demodulator permits the development of economical fiber-optic sensor systems
Evaluating Modeled Intra- to Multidecadal Climate Variability Using Running Mann–Whitney \u3cem\u3eZ\u3c/em\u3e Statistics
An analysis method previously used to detect observed intra- to multidecadal (IMD) climate regimes was adapted to compare observed and modeled IMD climate variations. Pending the availability of the more appropriate phase 5 Coupled Model Intercomparison Project (CMIP-5) simulations, the method is demonstrated using CMIP-3 model simulations. Although the CMIP-3 experimental design will almost certainly prevent these model runs from reproducing features of historical IMD climate variability, these simulations allow for the demonstration of the method and illustrate how the models and observations disagree. This method samples a time series’s data rankings over moving time windows, converts those ranking sets to a Mann–Whitney U statistic, and then normalizes the U statistic into a Z statistic. By detecting optimally significant IMD ranking regimes of arbitrary onset and varying duration, this process generates time series of Z values that are an adaptively low-passed and normalized transformation of the original time series. Principal component (PC) analysis of the Z series derived from observed annual temperatures at 92 U.S. grid locations during 1919–2008 shows two dominant modes: a PC1 mode with cool temperatures before the late 1960s and warm temperatures after the mid-1980s, and a PC2 mode indicating a multidecadal temperature cycle over the Southeast. Using a graphic analysis of a Z error metric that compares modeled and observed Z series, the three CMIP-3 model simulations tested here are shown to reproduce the PC1 mode but not the PC2 mode. By providing a way to compare grid-level IMD climate response patterns in observed and modeled data, this method can play a useful diagnostic role in future model development and decadal climate forecasting
Studying the effects of in-vehicle information systems on driver visual behaviour – implications for design
In-vehicle information systems (IVIS) are a common feature in modern vehicles. The interaction of drivers with IVIS when driving must be considered to minimise distraction whilst maintaining the benefits provided. This research investigates the glance behaviours of drivers, assessed from video data, when using two functions – a personal navigation device (study 1) and a green driving advisory device (study 2). The main focus was to establish the number of glances of 2 seconds or more to the IVIS and relate this to driver safety (as stipulated in new guidelines for use of IVIS proposed by NHTSA). In study 1, the percentage of eyes- off-road time for drivers was much greater in the experimental (with device) condition compared to the baseline condition (14.3% compared to 6.7%) but, whilst glances to the personal navigation device accounted for the majority of the increase, there were very few which exceeded 2 seconds. Drivers in study 2 spent on average 4.3% of their time looking at the system, at an average of 0.43 seconds per glance; no glances exceeded 2 seconds. The research showed that ordinary use of IVIS (excluding manual interaction) does not lead to driver visual distraction and therefore the impact on safety is minimal. The results of the study have important design implications for future in-vehicle information systems
Comparing the Model-simulated Global Warming Signal to Observations Using Empirical Estimates of Unforced Noise
The comparison of observed global mean surface air temperature (GMT) change to the mean change simulated by climate models has received much public and scientific attention. For a given global warming signal produced by a climate model ensemble, there exists an envelope of GMT values representing the range of possible unforced states of the climate system (the Envelope of Unforced Noise; EUN). Typically, the EUN is derived from climate models themselves, but climate models might not accurately simulate the correct characteristics of unforced GMT variability. Here, we simulate a new, empirical, EUN that is based on instrumental and reconstructed surface temperature records. We compare the forced GMT signal produced by climate models to observations while noting the range of GMT values provided by the empirical EUN. We find that the empirical EUN is wide enough so that the interdecadal variability in the rate of global warming over the 20th century does not necessarily require corresponding variability in the rate-of-increase of the forced signal. The empirical EUN also indicates that the reduced GMT warming over the past decade or so is still consistent with a middle emission scenario’s forced signal, but is likely inconsistent with the steepest emission scenario’s forced signal
Computational Difficulty of Computing the Density of States
We study the computational difficulty of computing the ground state
degeneracy and the density of states for local Hamiltonians. We show that the
difficulty of both problems is exactly captured by a class which we call #BQP,
which is the counting version of the quantum complexity class QMA. We show that
#BQP is not harder than its classical counting counterpart #P, which in turn
implies that computing the ground state degeneracy or the density of states for
classical Hamiltonians is just as hard as it is for quantum Hamiltonians.Comment: v2: Accepted version. 9 pages, 1 figur
- …