28,018 research outputs found
Development of a novel metastable composite material
The development of a new family of mouldable metastable composite materials has been demonstrated. Their special quality is derived from the ability to maintain the matrix as a supercooled liquid or gel whose solidification can be triggered mechanically, as desired, by a user. This article describes some aspects of the development work. In particular, the following are explained: the choice of matrix material; the use of additives to enhance the properties of the matrix; and the selection of reinforcement fibre. As part of the work, some mechanical testing was performed on several variations of a matrix-fibre pair and, to demonstrate the potential of such materials, some comparisons were made with a possible competitor material, a glass-reinforced urethane. It was shown that the metastable material could be formulated to provide mechanical properties that would make it suitable for applications such as orthopaedic casting, splinting and body armour, and in items of sports equipment, these being areas where its mouldability could be particularly desirable
Two stochastic models useful in petroleum exploration
A model of the petroleum exploration process that tests empirically the hypothesis that at an early stage in the exploration of a basin, the process behaves like sampling without replacement is proposed along with a model of the spatial distribution of petroleum reserviors that conforms to observed facts. In developing the model of discovery, the following topics are discussed: probabilitistic proportionality, likelihood function, and maximum likelihood estimation. In addition, the spatial model is described, which is defined as a stochastic process generating values of a sequence or random variables in a way that simulates the frequency distribution of areal extent, the geographic location, and shape of oil deposit
Reward and uncertainty in exploration programs
A set of variables which are crucial to the economic outcome of petroleum exploration are discussed. These are treated as random variables; the values they assume indicate the number of successes that occur in a drilling program and determine, for a particular discovery, the unit production cost and net economic return if that reservoir is developed. In specifying the joint probability law for those variables, extreme and probably unrealistic assumptions are made. In particular, the different random variables are assumed to be independently distributed. Using postulated probability functions and specified parameters, values are generated for selected random variables, such as reservoir size. From this set of values the economic magnitudes of interest, net return and unit production cost are computed. This constitutes a single trial, and the procedure is repeated many times. The resulting histograms approximate the probability density functions of the variables which describe the economic outcomes of an exploratory drilling program
Pressure distributions obtained on a 0.04-scale and 0.02-scale model of the Space Shuttle Orbiter's forward fuselage in the Langley 20-inch Mach 6 air tunnel
Results from pressure distribution tests on 0.04-scale and 0.02-scale models of the forward fuselage of the Space Shuttle Orbier are presented without analysis. The tests were completed in the Langley 20-Inch Mach 6 Tunnel. The 0.04-scale model was tested at angles of attack from 0 to 35 and angles of sideslip from 0 to -4. The 0.02-scale model was tested at angles of attack from -10 to 45 and angles of sideslip from 0 to -4. The tests were conducted in support of the development of the Shuttle Entry Air Data System (SEADS). In addition to modeling the 20 SEADS pressure orifices, the wind-tunnel to models were also instrumented with orifices to match Development Flight Instrumentation (DFI) port locations currently existing on the Space Shuttle Orbiter Columbia (OV-102). This DFI simulation had provided a means for comparisons between reentry flight pressure data and wind-tunnel data
Pressure distributions obtained on a 0.04-scale and 0.02-scale model of the Space Shuttle Orbiter's forward fuselage in the Langley continuous flow hypersonic tunnel
Results from pressure distribution tests on 0.04-scale and 0.02-scale models of the forward fuselage of the Space Shuttle Orbiter are presented without analysis. The tests wre completed in the Langley Continuous Flow Hypersonic Tunnel (CFHT). The 0.04-scale model was tested at angles of attack from -5 deg to 45 deg and angles of sideslip from -3 deg to 3 deg. The 0.02-scale model was tested at angles of attack from -10 deg to 45 deg and angles of sideslip from -5 deg to 5 deg. The tests were conducted in support of the development of the Shuttle Entry Air Data System (SEADS). In addition to modeling the 20 SEADS pressure orifices, the wind-tunnel models were also instrumented with orifices to match Development Flight Instrumentation (DFI) port locations currently existing on the Space Shuttle Orbiter Columbia (OV-102). This DFI simulation has provided a means for comparisons between reentry flight pressure data and wind-tunnel data
Light Curve Patterns and Seismology of a White Dwarf with Complex Pulsation
The ZZ Ceti star KUV 02464+3239 was observed over a whole season at the
mountain station of Konkoly Observatory. A rigorous frequency analysis revealed
6 certain periods between 619 and 1250 seconds, with no shorter period modes
present. We use the observed periods, published effective temperature and
surface gravity, along with the model grid code of Bischoff-Kim, Montgomery and
Winget (2008) to perform a seismological analysis. We find acceptable model
fits with masses between 0.60 and 0.70 M_Sun. The hydrogen layer mass of the
acceptable models are almost always between 10^-4 and 10^-6 M_*. In addition to
our seismological results, we also show our analysis of individual light curve
segments. Considering the non-sinusoidal shape of the light curve and the
Fourier spectra of segments showing large amplitude variations, the importance
of non-linear effects in the pulsation is clearly seen.Comment: 5 pages, 6 figures, in "Stellar Pulsation: Challenges for Theory and
Observation", Eds. J. Guzik and P. A. Bradley, AIP
Pressure distributions on a 0.04-scale model of the Space Shuttle Orbiter's forward fuselage in the Langley unitary plan wind tunnel
Pressure distribution tests on a 0.04-scale model of the forward fuselage of the Space Shuttle Orbiter are presented without analysis. The tests were completed in the Langley Unitary Plan Wind Tunnel (UPWT). The UPWT has two different test sections operating in the continuous mode. Each test section has its own Mach number range. The model was tested at angles of attack from -2.5 deg to 30 deg and angles of sideslip from -5 deg to 5 deg in both test sections. The test Reynolds number was 6.6 x 10 to the 6th power per meter. The tests were conducted in support of the development of the Shuttle Entry Air Data System (SEADS). In addition to modeling the 20 SEADS pressure orifices, the wind-tunnel model was also instrumented with orifices to match Development Flight Instrumentation (DFI) port locations currently existing on the Space Shuttle Orbiter Columbia (OV-102). This DFI simulation has provided a means for comparisons between reentry flight pressure data and wind-tunnel data
Snell's Law for a vortex dipole in a Bose-Einstein condensate
A quantum vortex dipole, comprised of a closely bound pair of vortices of
equal strength with opposite circulation, is a spatially localized travelling
excitation of a planar superfluid that carries linear momentum, suggesting a
possible analogy with ray optics. We investigate numerically and analytically
the motion of a quantum vortex dipole incident upon a step-change in the
background superfluid density of an otherwise uniform two-dimensional
Bose-Einstein condensate. Due to the conservation of fluid momentum and energy,
the incident and refracted angles of the dipole satisfy a relation analogous to
Snell's law, when crossing the interface between regions of different density.
The predictions of the analogue Snell's law relation are confirmed for a wide
range of incident angles by systematic numerical simulations of the
Gross-Piteavskii equation. Near the critical angle for total internal
reflection, we identify a regime of anomalous Snell's law behaviour where the
finite size of the dipole causes transient capture by the interface.
Remarkably, despite the extra complexity of the surface interaction, the
incoming and outgoing dipole paths obey Snell's law.Comment: 16 pages, 7 figures, Scipost forma
A -adic RanSaC algorithm for stereo vision using Hensel lifting
A -adic variation of the Ran(dom) Sa(mple) C(onsensus) method for solving
the relative pose problem in stereo vision is developped. From two 2-adically
encoded images a random sample of five pairs of corresponding points is taken,
and the equations for the essential matrix are solved by lifting solutions
modulo 2 to the 2-adic integers. A recently devised -adic hierarchical
classification algorithm imitating the known LBG quantisation method classifies
the solutions for all the samples after having determined the number of
clusters using the known intra-inter validity of clusterings. In the successful
case, a cluster ranking will determine the cluster containing a 2-adic
approximation to the "true" solution of the problem.Comment: 15 pages; typos removed, abstract changed, computation error remove
- …