SBMLToolbox: an SBML toolbox for MATLAB users

We present SBMLToolbox, a toolbox that facilitates importing and exporting models represented in the Systems Biology Markup Language (SBML) in and out of the MATLAB environment and provides functionality that enables an experienced user of either SBML or MATLAB to combine the computing power of MATLAB with the portability and exchangeability of an SBML model. SBMLToolbox supports all levels and versions of SBML

Neurosensory Disturbances After Apical Surgery of Mandibular Premolars and Molars: A Retrospective Analysis and Case-Control Study.

OBJECTIVE Apical surgery is an intervention to treat teeth with persistent or recurrent endodontic infection. The proximity of the mental foramen and mandibular canal may pose a risk of altered sensation when performing surgical interventions in the posterior mandible. The objective of this study was to determine the rate of neurosensory disturbances after apical surgery of mandibular premolars and molars. The secondary objective was to evaluate whether the occurrence of altered sensation correlated with the distances from the apex or the periapical lesion to the relevant anatomical structures. METHODS The charts of patients treated from September 1999 to December 2015 were retrospectively evaluated if an apical surgery had been performed in mandibular premolars or molars, and a minimum period of 1-year follow-up was documented. Patients with trauma or other surgical interventions in the same hemimandible were excluded. Cases with postsurgical altered sensation were defined as the test group. From the pool of unaffected cases, patients were selected to serve as controls. Two- or three-dimensional radiographs of test and control cases were assessed with regard to the shortest distances from the root apices/lesions to the mental foramen or mandibular canal. RESULTS The study population included 243 patients with 249 apical surgeries, of which 12.9% led to postoperative neurosensory disturbances. Sensation returned to normal within 22 days on average. The most frequent findings were hyperesthesia or paresthesia. With regard to the treated type of tooth, second premolars resulted more frequently (22.6%) in altered sensation than the other teeth (11.2 to 13.0%; p=0.310). There were no significant differences when comparing test and control cases regarding the measured distances in radiographs from the apex/lesion to the relevant anatomical structures. CONCLUSION Altered sensation may typically occur following apical surgery in posterior mandibular teeth. However, in all cases of the present study, skin sensitivity in the lip/chin region returned to normal. The clinician must be particularly careful when performing apical surgery of second premolars due to the proximity of the mental foramen

LibSBML: an API library for SBML

LibSBML is an application programming interface library for reading, writing, manipulating and validating content expressed in the Systems Biology Markup Language (SBML) format. It is written in ISO C and C++, provides language bindings for Common Lisp, Java, Python, Perl, MATLAB and Octave, and includes many features that facilitate adoption and use of both SBML and the library. Developers can embed libSBML in their applications, saving themselves the work of implementing their own SBML parsing, manipulation and validation software

Scleroderma and dentistry: Two case reports

© 2016 The Author(s).Background: Scleroderma is a chronic connective tissue disorder with unknown etiology. It is characterized by excessive deposition of extracellular matrix in the connective tissues causing vascular disturbances which can result in tissue hypoxia. These changes are manifested as atrophy of the skin and/or mucosa, subcutaneous tissue, muscles, and internal organs. Such changes can be classified into two types, namely, morphea (localized) and diffuse (systemic). Morphea can manifest itself as hemifacial atrophy (Parry-Romberg syndrome) although this remains debatable. Hence, we present a case of morphea, associated with Parry-Romberg syndrome, and a second case with the classical signs of progressive systemic sclerosis. Case presentation: Case one: A 20-year-old man of Dravidian origin presented to our out-patient department with a complaint of facial asymmetry, difficulty in speech, and loss of taste sensation over the last 2 years. There was no history of facial trauma. After physical and radiological investigations, we found gross asymmetry of the left side of his face, a scar on his chin, tongue atrophy, relative microdontia, thinning of the ramus/body of his mandible, and sclerotic lesions on his trunk. Serological investigations were positive for antinuclear antibody for double-stranded deoxyribonucleic acid and mitochondria. A biopsy was suggestive of morphea. Hence, our final diagnosis was mixed morphea with Parry-Romberg syndrome. Case two: A 53-year-old woman of Dravidian origin presented to our out-patient department with a complaint of gradually decreasing mouth opening over the past 7 years. Her medical history was noncontributory. On clinical examination, we found her perioral, neck, and hand skin to be sclerotic. Also, her fingers exhibited bilateral telangiectasia. An oral examination revealed completely edentulous arches as well as xerostomia and candidiasis. Her serological reports were positive for antinuclear antibodies against centromere B, Scl-70, and Ro-52. A hand and wrist radiograph revealed acro-osteolysis of the middle finger on her right hand. Hence, our final diagnosis was progressive systemic sclerosis. Conclusion: Through this article, we have tried to emphasize the importance of a general examination when diagnosing rare systemic diseases such as scleroderma and the role of the general dentist when caring for such patients, even though they can be quite rare in general practice.published_or_final_versio

Localization of impacted maxillary canines and root resorption of neighbouring teeth: a study assessing the diagnostic value of panoramic radiographs in two groups of observers

SUMMARYOBJECTIVES: To assess the diagnostic value of panoramic views (2D) of patients with impacted maxillary canines by a group of trained orthodontists and oral surgeons, and to quantify the subjective need and reasons for further three-dimensional (3D) imaging. MATERIALS AND METHODS: The study comprises 60 patients with panoramic radiographs (2D) and cone beam computed tomography (CBCT) scans (3D), and a total of 72 impacted canines. Data from a standardized questionnaire were compared within (intragroup) and between (intergroup) a group of orthodontists and oral surgeons to assess possible correlations and differences. Furthermore, the questionnaire data were compared with the findings from the CBCT scans to estimate the correlation within and between the two specialties. Finally, the need and reasons for further 3D imaging was analysed for both groups. RESULTS: When comparing questionnaire data with the analysis of the respective CBCT scans, orthodontists showed probability (Pr) values ranging from 0.443 to 0.943. Oral surgeons exhibited Pr values from 0.191 to 0.946. Statistically significant differences were found for the labiopalatal location of the impacted maxillary canine (P = 0.04), indicating a higher correlation in the orthodontist group. The most frequent reason mentioned for the further need of 3D analysis was the labiopalatal location of the impacted canines. Oral surgeons were more in favour of performing further 3D imaging (P = 0.04). CONCLUSIONS: Orthodontists were more likely to diagnose the exact labiopalatal position of impacted maxillary canines when using panoramic views only. Generally, oral surgeons more often indicated the need for further 3D imagin

Impact of Orthodontic Forces on Plasma Levels of Markers of Bone Turnover and Inflammation in a Rat Model of Buccal Expansion.

Plasma levels of protein analytes might be markers to predict and monitor the kinetics of bone and tissue remodeling, including maximization of orthodontic treatment stability. They could help predict/prevent and/or diagnose possible adverse effects such as bone dehiscences, gingival recession, or root resorption. The objective of this study was to measure plasma levels of markers of bone turnover and inflammation during orthodontic force application in a rat model of orthodontic expansion. Two different orthodontic forces for bilateral buccal expansion of the maxillary arches around second and third molars were applied in 10 rats equally distributed in low-force (LF) or conventional force (CF) groups. Four rats served as the control group. Blood samples were collected at days 0, 1, 2, 3, 6, 13, 21, and 58. Longitudinal concentrations of osteoprotegerin (OPG), soluble receptor activator of nuclear factor kappaB ligand (sRANKL), interleukin-4 (IL-4), interleukin-6 (IL-6), interleukin-10 (IL-10), tumor necrosis factor α (TNF), and parathyroid hormone (PTH) were determined in blood samples by a multiplex immunoassay. CF and LF resulted in a significantly maxillary skeletal expansion while the CF group demonstrated significantly higher expansion than the LF group in the long term. Bone turnover demonstrated a two-phase response. During the "early phase" (up to 6 days of force application), LF resulted in more sRANKL expression and increased sRANKL/OPG ratio than the CF and control animals. There was a parallel increase in PTH levels in the early phase in response to LF. During the "late phase" (6-58 days), the markers of bone turnover were stable in both groups. IL-4, IL-6, and IL-10 levels did not significantly change the test groups throughout the study. These results suggest that maxillary expansion in response to different orthodontic forces follows different phases of bone turnover that may be force specific

Impacted maxillary canines and root resorptions of neighbouring teeth: a radiographic analysis using cone-beam computed tomography

The study analyses the location of impacted maxillary canines and factors influencing root resorptions of adjacent teeth using cone-beam computed tomography (CBCT). In addition, the interrater reliability between observers of two different dental specialties for radiographic parameters will be evaluated. CBCT images of patients who were referred for radiographic localization of impacted maxillary canines and/or suspicion of root resorptions of adjacent teeth were included. The study analysed the exact three-dimensional location of the impacted canines in the anterior maxilla, frequency and extent of root resorptions, and potential influencing factors. To assess interrater agreement, Cohen's correlation parameters were calculated. This study comprises 113 patients with CBCT scans, and 134 impacted canines were analysed retrospectively. In the patients evaluated, 69 impacted canines were located palatally (51.49 per cent), 41 labially (30.60 per cent), and 24 (17.91 per cent) in the middle of the alveolar process. Root resorptions were found in 34 lateral incisors (25.37 per cent), 7 central incisors (5.22 per cent), 6 first premolars (4.48 per cent), and 1 second premolar (0.75 per cent). There was a significant correlation between root resorptions on adjacent teeth and localization of the impacted canine in relation to the bone, as well as vertical localization of the canine. Interrater agreement showed values of 0.546-0.877. CBCT provides accurate information about location of the impacted canine and prevalence and degree of root resorption of neighbouring teeth with high interrater correlation. This information is of great importance for surgeons and orthodontists for accurate diagnostics and interdisciplinary treatment plannin

Morphologic characteristics, location, and associated complications of maxillary and mandibular supernumerary teeth as evaluated using cone beam computed tomography

SUMMARYOBJECTIVES: To evaluate the location and morphologic characteristics of supernumerary teeth and to assess the frequency and extent of root resorption of adjacent teeth using cone beam computed tomography (CBCT). MATERIALS AND METHODS: CBCT scans of 82 patients with supernumerary teeth in the maxilla and mandible were evaluated by two orthodontists independently. Data regarding the type, shape, and three-dimensional (3D) location of the supernumeraries including the frequency and extent of root resorption of adjacent teeth were recorded and evaluated for possible associations. RESULTS: The study comprised a total of 101 supernumerary teeth. Most of the patients (80.5 per cent) exhibited one single supernumerary tooth, while 15.8 per cent had two and 3.7 per cent had three supernumeraries. Males were affected more than females with a ratio of 1.65:1. Mesiodentes were the most frequently diagnosed type of supernumerary teeth (48.52 per cent), followed by supernumerary premolars (23.76 per cent) and lateral incisors (18.81 per cent). Supernumeraries were most commonly conical in shape (42.6 per cent) with a normal or inclined vertical position (61.4 per cent). Root resorption of adjacent teeth was detected for 22.8 per cent of the supernumerary teeth, most frequently for supernumerary premolars. There was a significant association between root resorption of adjacent teeth and type and shape of tooth. Interrater agreement for the measurements performed showed kappa values ranging from 0.55 to 1 with a kappa value of 1 for type and shape of the supernumerary teeth. CONCLUSIONS: CBCT provides 3D information about location and shape of supernumerary teeth as well as prevalence and degree of root resorption of neighbouring teeth with moderate to high interrater correlatio

Accuracy of linear measurements using three imaging modalities: two lateral cephalograms and one 3D model from CBCT data

SummaryBackground: The aim of this study was to evaluate the accuracy of linear measurements on three imaging modalities: lateral cephalograms from a cephalometric machine with a 3 m source-to-mid-sagittal-plane distance (SMD), from a machine with 1.5 m SMD and 3D models from cone-beam computed tomography (CBCT) data. Methods: Twenty-one dry human skulls were used. Lateral cephalograms were taken, using two cephalometric devices: one with a 3 m SMD and one with a 1.5 m SMD. CBCT scans were taken by 3D Accuitomo® 170, and 3D surface models were created in Maxilim® software. Thirteen linear measurements were completed twice by two observers with a 4 week interval. Direct physical measurements by a digital calliper were defined as the gold standard. Statistical analysis was performed. Results: Nasion-Point A was significantly different from the gold standard in all methods. More statistically significant differences were found on the measurements of the 3 m SMD cephalograms in comparison to the other methods. Intra- and inter-observer agreement based on 3D measurements was slightly better than others. Limitations: Dry human skulls without soft tissues were used. Therefore, the results have to be interpreted with caution, as they do not fully represent clinical conditions. Conclusions: 3D measurements resulted in a better observer agreement. The accuracy of the measurements based on CBCT and 1.5 m SMD cephalogram was better than a 3 m SMD cephalogram. These findings demonstrated the linear measurements accuracy and reliability of 3D measurements based on CBCT data when compared to 2D techniques. Future studies should focus on the implementation of 3D cephalometry in clinical practic

Translation and validation of an ageism scale for dental students in Switzerland

PURPOSE This study aimed to validate an ageism scale for dental students in Switzerland. METHODS The original scale was first translated to German and then evaluated by 14 experts for relevance; four items were eliminated. Validation of the resulting questionnaire was performed at three Swiss dental schools. Principal component analysis (PCA) was performed; Cronbach's alpha (α) was used to assess the internal consistency reliability, and Pearson's coefficient to identify any correlations with demographic parameters (P < 0.05). RESULTS PCA revealed 11 items among 4 factors (Overall: 11 items, α = 0.63, variance = 56.6%; Factor #1 (F1): items = 3, α = 0.64; Factor #2 (F2): items = 3, α = 0.42; Factor #3 (F3): items = 3, α = 0.35; Factor #4 (F4): items = 2, α = 0.37). F1 and F4 were correlated with clinical experience (F1: P = 0.042; F4: P = 0.006) and participation in a gerodontology course (F1: P = 0.021; F4: P = 0.004). F1 was correlated with experience of dealing with the elderly (P = 0.031), while residence locality was correlated with F3 (P = 0.047) and F4 (P = 0.043). F2 was correlated with the presence of elderly in the family (P = 0.047). CONCLUSION The translated dental ageism questionnaire for Switzerland resulted in an 11-item scale with acceptable reliability