Design and Prototyping of the ATLAS High Level Trigger

This paper outlines the design and prototyping of the ATLAS High Level Trigger (HLT) which is a combined effort of the Data Collection, HLT and PESA (Physics and Event Selection Architecture) subgroups within the ATLAS TDAQ collaboration. Two important issues, already outlined in the ATLAS HLT, DAQ and DCS Technical Proposal [1] will be highlighted: the treatment of the LVL2 Trigger and Event Filter as aspects of a general HLT with a view to easier migration of algorithms between the two levels; unification of the selective data collection for LVL2 and Event Building

Coarse wavelength division multiplexer on silicon-on-insulator for 100 GbE

A four-channel cascaded MZl based de-multiplexer at O-band with coarse channel spacing of 20 nm and band flatness of 13 nm is demonstrated on silicon-on-insulator. The device shows a mean crosstalk and insertion loss below -16 dB and 2.5 dB

The ePIXnet silicon photonics platform (invited paper)

C

Compact thermally tunable silicon racetrack modulators based on an asymmetric waveguide

A compact wavelength-tunable 10-Gb/s silicon racetrack modulator with integrated thermo-optic heater is demonstrated by using a waveguide with an asymmetric cross section, combining the compact footprint of microdisk modulators with the design simplicity of regular racetrack or ring modulators. The outer perimeter of the asymmetric racetrack modulator is fully etched to maximize optical confinement, and the inner waveguide edge is shallowly etched to maintain an electrically conductive path to the embedded p-n diode and to control the propagation of the asymmetric optical mode and its coupling to the bus waveguide. The resistive heating elements based on highly doped Si strips are implemented at the outer edge of the modulator for thermo-optic control. The asymmetric modulators can be fabricated along with Si wire waveguides and shallowly etched fiber-grating couplers using a simple process flow involving just two Si-patterning steps. Devices with a bending radius of 10 mu m and a novel "T"-shaped p-n diode layout have been fabricated, and exhibit electro-optic modulation and heater efficiencies of 28 pm/V and 42 pm/mW, respectively. At 10 Gb/s, a stable extinction ratio of 10 dB is demonstrated from a 2V(pp) drive swing, which can be maintained over a wavelength range of 4.6 nm by thermally tuning the modulator. This is equivalent with a temperature variation of about 62 degrees C

8x14Gb/s ring WDM modulator array with integrated tungsten heaters and Ge monitor photodetectors

An 8x14Gb/s wavelength-division multiplexed Si ring modulator array is presented with uniform channel performance. Tungsten heaters and Ge monitor photodetectors at the ring modulator drop ports are co-integrated to track and control the modulation quality