On the mechanisms governing gas penetration into a tokamak plasma during a massive gas injection

A new 1D radial fluid code, IMAGINE, is used to simulate the penetration of gas into a tokamak plasma during a massive gas injection (MGI). The main result is that the gas is in general strongly braked as it reaches the plasma, due to mechanisms related to charge exchange and (to a smaller extent) recombination. As a result, only a fraction of the gas penetrates into the plasma. Also, a shock wave is created in the gas which propagates away from the plasma, braking and compressing the incoming gas. Simulation results are quantitatively consistent, at least in terms of orders of magnitude, with experimental data for a D 2 MGI into a JET Ohmic plasma. Simulations of MGI into the background plasma surrounding a runaway electron beam show that if the background electron density is too high, the gas may not penetrate, suggesting a possible explanation for the recent results of Reux et al in JET (2015 Nucl. Fusion 55 093013)

Determining the prediction limits of models and classifiers with applications for disruption prediction in JET

Understanding the many aspects of tokamak physics requires the development of quite sophisticated models. Moreover, in the operation of the devices, prediction of the future evolution of discharges can be of crucial importance, particularly in the case of the prediction of disruptions, which can cause serious damage to various parts of the machine. The determination of the limits of predictability is therefore an important issue for modelling, classifying and forecasting. In all these cases, once a certain level of performance has been reached, the question typically arises as to whether all the information available in the data has been exploited, or whether there are still margins for improvement of the tools being developed. In this paper, a theoretical information approach is proposed to address this issue. The excellent properties of the developed indicator, called the prediction factor (PF), have been proved with the help of a series of numerical tests. Its application to some typical behaviour relating to macroscopic instabilities in tokamaks has shown very positive results. The prediction factor has also been used to assess the performance of disruption predictors running in real time in the JET system, including the one systematically deployed in the feedback loop for mitigation purposes. The main conclusion is that the most advanced predictors basically exploit all the information contained in the locked mode signal on which they are based. Therefore, qualitative improvements in disruption prediction performance in JET would need the processing of additional signals, probably profiles

Modelling of the JET DT Experiments in Carbon and ITER-like Wall Configurations

In this paper numerical simulations with the self-consistent COREDIV code of the planned JET DT experiments have been performed. First, record shot from the 1997 experiments was simulated and good agreement with experimental data has been found. Direct extrapolation of the carbon wall results to the new ILW configuration (discharge parameters as for the shot #42746) shows very good core plasma performance with even higher fusion power but with too large power to the divertor. However, with the neon seeding the heat load and plate temperatures can be efficiently reduced keeping good the plasma performance. Investigations have been done also for the planned DT operation scenario based on a conventional ELMy H-mode at high plasma current and magnetic field. Simulations for the reference ELMy H-mode shot #87412 show good agreement with the experimental data but the direct extrapolation of the DD results to deuterium-tritium operation shows relatively poor performance in terms of the achieved fusion power. The situation improves, if the highest heating power is assumed (41 MW) and fusion powers in the excess of 12 MW can be achieved. All the high performance shots require the heat load control by neon seeding which shows rather beneficial effect on the plasma performance allowing for relatively wide operational window in terms of the amount of the allowed neon influx

MHD marking using the MSE polarimeter optics in ILW JET plasmas

In this communication we propose a novel diagnostic technique, which uses the collection optics of the JET Motional Stark Effect (MSE) diagnostic, to perform polarimetry marking of observed MHD in high temperature plasma regimes. To introduce the technique, first we will present measurements of the coherence between MSE polarimeter, electron cyclotron emission, and Mirnov coil signals aiming to show the feasibility of the method. The next step consists of measuring the amplitude fluctuation of the raw MSE polarimeter signals, for each MSE channel, following carefully the MHD frequency on Mirnov coil data spectrograms. A variety of experimental examples in JET ITER-Like Wall (ILW) plasmas are presented, providing an adequate picture and interpretation for the MSE optics polarimeter technique

JET experiments with tritium and deuterium–tritium mixtures

Extensive preparations are now underway for an experiment in the Joint European Torus (JET) using tritium and deuterium–tritium mixtures. The goals of this experiment are described as well as the progress that has been made in developing plasma operational scenarios and physics reference pulses for use in deuterium–tritium and full tritium plasmas. At present, the high performance plasmas to be tested with tritium are based on either a conventional ELMy H-mode at high plasma current and magnetic field (operation at up to 4 MA and 4 T is being prepared) or the so-called improved H-mode or hybrid regime of operation in which high normalised plasma pressure at somewhat reduced plasma current results in enhanced energy confinement. Both of these regimes are being re-developed in conjunction with JET's ITER-like Wall (ILW) of beryllium and tungsten. The influence of the ILW on plasma operation and performance has been substantial. Considerable progress has been made on optimising performance with the all-metal wall. Indeed, operation at the (normalised) ITER reference confinement and pressure has been re-established in JET albeit not yet at high current. In parallel with the physics development, extensive technical preparations are being made to operate JET with tritium. The state and scope of these preparations is reviewed, including the work being done on the safety case for DT operation and on upgrading machine infrastructure and diagnostics. A specific example of the latter is the planned calibration at 14 MeV of JET neutron diagnostics

Comparison of dust transport modelling codes in a tokamak plasma

Since the installation on the Joint European Torus of the ITER-like Wall (ILW), intense radiation spikes have been observed, especially in the discharges following a disruption, and have been associated with possible sudden injection of tungsten (W) impurities consequent to full ablation of W dust particles. The problem of dust production, mobilization, and interaction both with the plasma and the vessel tiles is therefore of great concern and requires the setting up of dedicated and validated numerical modeling tools. Among these, a useful role is played by the dust trajectory calculators, which can present in a relatively clear way the qualitative and quantitative description of the mobilization and fate of selected bunches of dust grains

Neutron emission spectroscopy of DT plasmas at enhanced energy resolution with diamond detectors

This work presents measurements done at the Peking University Van de Graaff neutron source of the response of single crystal synthetic diamond (SD) detectors to quasi-monoenergetic neutrons of 14-20 MeV. The results show an energy resolution of 1% for incoming 20 MeV neutrons, which, together with 1% detection efficiency, opens up to new prospects for fast ion physics studies in high performance nuclear fusion devices such as SD neutron spectrometry of deuterium-tritium plasmas heated by neutral beam injection