Microalgal Biomass for Greenhouse Gas Reductions: Potential for Replacement of Fossil Fuels and Animal Feeds

Microalgal biomass production offers a number of advantages over conventional biomass production, including higher productivities, use of otherwise nonproductive land, reuse and recovery of waste nutrients, use of saline or brackish waters, and reuse of CO2 from power-plant flue gas or similar sources. Microalgal biomass production and utilization offers potential for greenhouse gas (GHG) avoidance by providing biofuel replacement of fossil fuels and carbon-neutral animal feeds. This paper presents an initial analysis of the potential for GHG avoidance using a proposed algal biomass production system coupled to recovery of flue-gas CO2 combined with waste sludge and/or animal manure utilization. A model is constructed around a 50-MW natural gas-fired electrical generation plant operating at 50% capacity as a semibase-load facility. This facility is projected to produce 216 million k·Wh/240-day season while releasing 30.3 million kg-C/season of GHG-CO2. An algal system designed to capture 70% of flue-gas CO2 would produce 42,400 metric tons (dry wt.) of algal biomass/season and requires 880 ha of high-rate algal ponds operating at a productivity of 20 g-dry-wt/m2-day. This algal biomass is assumed to be fractionated into 20% extractable algal oil, useful for biodiesel, with the 50% protein content providing animal feed replacement and 30% residual algal biomass digested to produce methane gas, providing gross GHG avoidances of 20, 8.5, and 7.8%, respectively. The total gross GHG avoidance potential of 36.3% results in a net GHG avoidance of 26.3% after accounting for 10% parasitic energy costs. Parasitic energy is required to deliver CO2 to the algal culture and to harvest and process algal biomass and algal products. At CO2 utilization efficiencies predicted to range from 60–80%, net GHG avoidances are estimated to range from 22–30%. To provide nutrients for algal growth and to ensure optimal algae digestion, importation of 53 t/day of waste paper, municipal sludge, or animal manure would be required. This analysis does not address the economics of the processes considered. Rather, the focus is directed at determination of the technical feasibility of applying integrated algal processes for fossil-fuel replacement and power-plant GHG avoidance. The technology discussed remains in early stages of development, with many important technical issues yet to be addressed. Although theoretically promising, successful integration of waste treatment processes with algal recovery of flue-gas CO2 will require pilot-scale trials and field demonstrations to more precisely define the many detailed design requirements

Effects of Fluctuating Environments on the Selection of High Yielding Microalgae

Microalgae have the potential of producing biomass with a high content of lipids at high productivities using seawater or saline ground water resources. Microalgal lipids are similar to vegetable oils and suitable for processing to liquid fuels. Engineering cost analysis studies have concluded that, at a favorable site, microalgae cultivation for fuel production could be economically viable. The major uncertainties involve the microalgae themselves: biomass and lipid productivity and culture stability

Systems and economic analysis of microalgae ponds for conversion of CO{sub 2} to biomass. Final report

There is growing evidence that global warming could become a major global environmental threat during the 21st century. The precautionary principle commands preventive action, at both national and international levels, to minimize this potential threat. Many near-term, relatively inexpensive, mitigation options are available. In addition, long-term research is required to evaluate and develop advanced, possibly more expensive, countermeasures, in the eventuality that they may be required. The utilization of power plant CO{sub 2} and its recycling into fossil fuel substitutes by microalgae cultures could be one such long-term technology. Microalgae production is an expanding industry in the U.S., with three commercial systems (of approximately 10 hectare each) producing nutriceuticals, specifically beta-carotene, extracted from Dunaliella, and Spirulina biomass. Microalgae are also used in wastewater treatment. Currently production costs are high, about $10,000/ton of algal biomass, almost two orders of magnitude higher than acceptable for greenhouse gas mitigation. This report reviews the current state-of-the-art, including algal cultivation and harvesting-processing, and outlines a technique for achieving very high productivities. Costs of CO{sub 2} mitigation with microalgae production of oils ({open_quotes}biodiesel{close_quotes}) are estimated and future R&D needs outlined

Chemical Profiles of Microalgae with Emphasis on Lipids: Final Report

This final report details progress during the third year of this subcontract. The overall objective of this subcontract was two fold: to provide the analytical capability required for selecting microalgae strains with high energy contents and to develop fundamental knowledge required for optimizing the energy yield from microalgae cultures. The progress made towards these objectives during this year is detailed in this report

Light regime characterization in an airlift photobioreactor for production of microalgae with high starch content

The slow development of microalgal biotechnology is due to the failure in the design of large-scale photobioreactors (PBRs) where light energy is efficiently utilized. In this work, both the quality and the amount of light reaching a given point of the PBR were determined and correlated with cell density, light path length, and PBR geometry. This was made for two different geometries of the downcomer of an airlift PBR using optical fiber technology that allows to obtain information about quantitative and qualitative aspects of light patterns. This is important since the ability of microalgae to use the energy of photons is different, depending on the wavelength of the radiation. The results show that the circular geometry allows a more efficient light penetration, especially in the locations with a higher radial coordinate (r) when compared to the plane geometry; these observations were confirmed by the occurrence of a higher fraction of illuminated volume of the PBR for this geometry. An equation is proposed to correlate the relative light intensity with the penetration distance for both geometries and different microalgae cell concentrations. It was shown that the attenuation of light intensity is dependent on its wavelength, cell concentration, geometry of PBR, and the penetration distance of light.Fundação para a Ciência e a Tecnologia (FCT

“There was something very peculiar about Doc…”: Deciphering Queer Intimacy in Representations of Doc Holliday

This is an Accepted Manuscript of an article published by Taylor & Francis in American Nineteenth-Century History on 8-12-14, available online: http://dx.doi.org/10.1080/14664658.2014.971481This essay discusses representations of male intimacy in life-writing about consumptive gunfighter John Henry “Doc” Holliday (1851-1887). I argue that twentieth-century commentators rarely appreciated the historical specificity of Holliday’s friendships in a frontier culture that not only normalized but actively celebrated same-sex intimacy. Indeed, Holliday lived on the frayed edges of known nineteenth-century socio-sexual norms, and his interactions with other men were further complicated by his vicious reputation and his disability. His short life and eventful afterlife exposes the gaps in available evidence – and the flaws in our ability to interpret it. Yet something may still be gleaned from the early newspaper accounts of Holliday. Having argued that there is insufficient evidence to justify positioning him within modern categories of hetero/homosexuality, I analyze the language used in pre-1900 descriptions of first-hand encounters with Holliday to illuminate the consumptive gunfighter’s experience of intimacy, if not its meaning

Isolation of a euryhaline microalgal strain, Tetraselmis sp CTP4, as a robust feedstock for biodiesel production

Bioprospecting for novel microalgal strains is key to improving the feasibility of microalgae-derived biodiesel production. Tetraselmis sp. CTP4 (Chlorophyta, Chlorodendrophyceae) was isolated using fluorescence activated cell sorting (FACS) in order to screen novel lipid-rich microalgae. CTP4 is a robust, euryhaline strain able to grow in seawater growth medium as well as in non-sterile urban wastewater. Because of its large cell size (9-22 mu m), CTP4 settles down after a six-hour sedimentation step. This leads to a medium removal efficiency of 80%, allowing a significant decrease of biomass dewatering costs. Using a two-stage system, a 3-fold increase in lipid content (up to 33% of DW) and a 2-fold enhancement in lipid productivity (up to 52.1 mg L-1 d(-1)) were observed upon exposure to nutrient depletion for 7 days. The biodiesel synthesized from the lipids of CTP4 contained high levels of oleic acid (25.67% of total fatty acids content) and minor amounts of polyunsaturated fatty acids with >= 4 double bonds (< 1%). As a result, this biofuel complies with most of the European (EN14214) and American (ASTM D6751) specifications, which commonly used microalgal feedstocks are usually unable to meet. In conclusion, Tetraselmis sp. CTP4 displays promising features as feedstock with lower downstream processing costs for biomass dewatering and biodiesel refining