High-Performance Smooth-Walled Horn Antennas for THz Frequency Range:Design and Evaluation

Traditionally, corrugated conical horn antennas have been the main choice for use in astronomical receivers in the range of millimeter and submillimeter waves. They present low cross-polar level and high coupling efficiency into the fundamental Gaussian mode. However, this type of antenna is difficult to manufacture, inevitably increasing its price and extending the production process. In this article, we present two kinds of feed horn antennas, aimed for use in a frequency range equivalent to atacama large millimeter/submillimeter array (ALMA) Band 6 (211-275GHz), which can be fabricated in a much simpler way with the conventional machining tools. Specifically, we present the design and performance comparison of smooth-walled spline-profile horns in two geometries, diagonal, and conical. Optimization of the designs has been made by means of an algorithm that allowed us to obtain models whose electrical and mechanical characteristics make them competitive when compared with corrugated horns. In particular, they are $\text{40}\%$ shorter than the conventional corrugated horns suited for this band, representing an advantage given the stringent space constraints of most astronomical receivers. We also demonstrate that they can be coupled efficiently to an astronomical-grade optical system, using ALMA Band-6 receiver as an example. Furthermore, we have constructed the diagonal horn and characterized it thoroughly. Experimental results of the radiation pattern at room temperature show a good cross-polar performance with levels below -20dB and Gaussicity above $\text{96}\%$. Our calculations show a good antenna-efficiency level with losses less than $\text{1}\%$. All these properties demonstrate the feasibility of this type of horns to become the main option at the time of choosing a feed system for cutting-edge astronomical applications

Terahertz Spectroscopy of Gas Absorption Using the Superconducting Flux-Flow Oscillator as an Active Source and the Superconducting Integrated Receiver

We report on the first implementation of a terahertz (THz) source based on a Josephson flux-flow oscillator (FFO) that radiates to open space. The excellent performance of this source and its maturity for practical applications has been demonstrated by the spectroscopy of gas absorption. To study the radiated power, we used a bolometric detection method and additionally calibrated the power by means of pumping the superconductor–insulator–superconductor (SIS) junction, integrated on a single chip with the FFO. For calibration, we developed a program using the SIS-detected power calculations in accordance with the Tien and Gordon model. The power emitted to open space is estimated to be from fractions of µW to several µW in the wide region from 0.25 THz up to 0.75 THz for different designs, with a maximum power of 3.3 µW at 0.34 THz. Next, we used a gas cell and a heterodyne superconducting integrated receiver to trace the absorption lines of water and ammonia with a spectral resolution better than 100 kHz. Our experiment for gas absorption is the first demonstration of the applicability of the FFO as an external active source for different tasks, such as THz spectroscopy, near-field THz imaging and microscopy

The Influence of LO Power Heating of the Tunnel Junction on the Performance of THz SIS Mixers

Not Availabl

Surface wave control for large arrays of microwave kinetic inductance detectors

Large ultra-sensitive detector arrays are needed for present and future observatories for far infra-red, submillimeter wave (THz), and millimeter wave astronomy. With increasing array size, it is increasingly important to control stray radiation inside the detector chips themselves, the surface wave. We demonstrate this effect with focal plane arrays of 880 lens-antenna coupled Microwave Kinetic Inductance Detectors (MKIDs). Presented here are near field measurements of the MKID optical response versus the position on the array of a reimaged optical source. We demonstrate that the optical response of a detector in these arrays saturates off-pixel at the $\sim-30$ dB level compared to the peak pixel response. The result is that the power detected from a point source at the pixel position is almost identical to the stray response integrated over the chip area. With such a contribution, it would be impossible to measure extended sources, while the point source sensitivity is degraded due to an increase of the stray loading. However, we show that by incorporating an on-chip stray light absorber, the surface wave contribution is reduced by a factor $>$10. With the on-chip stray light absorber the point source response is close to simulations down to the $\sim-35$ dB level, the simulation based on an ideal Gaussian illumination of the optics. In addition, as a crosscheck we show that the extended source response of a single pixel in the array with the absorbing grid is in agreement with the integral of the point source measurements.Comment: accepted for publication in IEEE Transactions on Terahertz Science and Technolog

Study of the Calibration Channel Width for a Digital Sideband Separating System for SIS 2SB Receiver

A Digital Sideband Separating (DSS) system has been recently applied to a full 2SB receiver, i.e., one with the analog IF hybrid still in place. This concept allows reaching IRR level around 45 dB and it presents additional advantages in calibration stability compared to the case when no IF hybrid is present. If implemented in multipixel cameras, the DSS system relaxes the requirements for the IRR level of the analog receiver substantially enabling to reach at least an IRR of 30 dB with relatively simple hardware. It would be ideal for spectral line surveys since it practically eliminates the line confusion in addition to rejecting the atmospheric noise in the image band. Therefore, the DSS system is a potential option for a future ALMA upgrade. Here we present our study on an important practical question: how wide should the calibration-channel width in order to reach a desired IRR level? This parameter determines, for a large part, the calibration speed of the DSS system and influences the back-end architecture. We estimate that for currently installed ALMA bands (B3-B8), the channel width of the DSS system can be at least 45 MHz to reach a 30db IRR level in entire band

Thz range low-noise sis receivers for space and ground-based radio astronomy

We report on research in the field of low-noise receiving systems in the sub-terahertz (THz) range, carried out in recent years, aimed at developing receivers with quantum sensitivity for implementation in space and ground-based radio telescopes. Superconductor-Insulator-Superconductor (SIS) mixers based on high-quality tunnel junctions are the key elements of the most sensitive sub-THz heterodyne receivers. Motivations and physical background for technology improvement and optimization, as well as fabrication details, are described. This article presents the results of the SIS receiver developments for the 211–275 GHz and 790–950 GHz frequency ranges with a noise temperature in the double sideband (DSB) mode of approximTELY 20 K and 200 K, respectively. These designs and achievements are implemented in the development of the receiving systems for the Russian Space Agency mission “Millimetron”, and for the ground-based APEX (Atacama Pathfinder EXperiment) telescope

Eliminating stray radiation inside large area imaging arrays

With increasing array size, it is increasingly important to control stray radiation inside the detector chips themselves. We demonstrate this effect with focal plane arrays of absorber coupled Lumped Element microwave Kinetic Inductance Detectors (LEKIDs) and lens-antenna coupled distributed quarter wavelength Microwave Kinetic Inductance Detectors (MKIDs). In these arrays the response from a point source at the pixel position is at a similar level to the stray response integrated over the entire chip area. For the antenna coupled arrays, we show that this effect can be suppressed by incorporating an on-chip stray light absorber. A similar method should be possible with the LEKID array, especially when they are lens coupled.Comment: arXiv admin note: substantial text overlap with arXiv:1707.0214

Design and Performance of a Sideband Separating SIS Mixer for 800-950 GHz

We present the design and results of characterization of a new sideband separating (2SB) mixer for 800-950GHz, based on superconductor-insulator-superconductor (SIS) junctions. This is the first waveguide 2SB SIS mixer demonstrated at such a high frequency. The design is following the classical quadrature hybrid architecture, meanwhile additional attention was put on the reduction of reflections in the RF structure in order to minimize the RF imbalance, to achieve a high image rejection ratio (IRR). The RF waveguide block was manufactured by micromilling and populated by single-ended SIS mixers developed earlier for upgrade of the CHAMP+ high-band array on the APEX telescope. These SIS mixers have double-sideband (DSB) noise temperatures from 210 to 400K. The assembled 2SB mixer yields a SSB noise temperature from 450 to 900K, with an IRR above 15dB in 95 of the band. Comparing the DSB and the SSB sensitivities, we find that the waveguide losses are as low as expected and do not exceed 0.6dB. The presented mixer is a prototype for use in a 2SB dual polarization receiver planned for deployment on the APEX telescope

Proof-of-Concept Demonstration of Vector Beam Pattern Measurements of Kinetic Inductance Detectors

We present results from the first vector beam pattern measurement ofmicrowave kinetic inductance detectors (MKIDs). Vector beam patterns require sampling of the E-field of the receiver in both amplitude and phase. MKIDs are inherently direct detectors and have no phase response to incoming radiation. We map the amplitude and phase patterns of the detector beam profile by adapting a two-source heterodyne technique. Our testing strategy recovers the phase information by creating a reference signal to trigger data acquisition. The reference is generated by mixing the slightly offset low-frequency signals from the output of the two synthesizers used to drive the submillimeter sources. The key requirement is that the time-series record always begins at the same set phase of the reference signal. As the source probe is scanned within the receiver beam, the wavefront propagation phase of the receiver changes and causes a phase offset between the detector output and reference signals. We demonstrated this technique on the central pixel of a test array operating at 350 GHz. This methodology will enable vector beam pattern measurements to be performed on direct detectors, which have distinct advantages reducing systematic sources of error, allowing beam propagation, and removing the far-field measurement requirement such that complicated optical systems can be measured at a point that is easily accessible, including the near field

Phase locked 270-440 GHz local oscillator based on flux flow in long Josephson tunnel junctions

The combination of narrow linewidth and wide band tunability makes the Josephson flux flow oscillator (FFO) a perfect on-chip local oscillator for integrated sub-mm wave receivers for, e.g., spectral radio astronomy. The feasibility of phase locking the FFO to an external reference oscillator is demonstrated experimentally. A FFO linewidth as low as 1 Hz (determined by the resolution bandwidth of the spectrum analyzer) has been measured in the frequency range 270-440 GHz relative to a reference oscillator. This linewidth is far below the fundamental level given by shot and thermal noise of the free-running tunnel junction. The results of residual FFO phase noise measurements are also presented. Finally, we propose a single-chip fully superconductive receiver with two superconductor-insulator-superconductor mixers and an integrated phase-locked loop. (C) 2000 American Institute of Physics. [S0034-6748(00)01701-9]