22 research outputs found

    Investigating the effects of using different types of SiO2 nanoparticles on the mechanical properties of binary blended concrete.

    Get PDF
    The aim of this study was to assess the effects of two different types of SiO2 nanoparticles (N and M series) with different ratios on the workability and compressive strength of developed binary blended concretes cured in water and lime solution as two different curing media. N and M series SiO2 nanoparticles with an average size of 15 nm were used as obtained from the suppliers. Fresh and hardened concretes incorporating 0.5%, 1.0%, 1.5% and 2.0% of N and 2% of M series nanoparticles with constant water to binder ratio and aggregate content were made and tested. Fresh mixtures were tested for workability and hardened concretes were tested for compressive strength at 7, 28 and 90 days of curing. Fresh concrete test results showed that the workability of binary blends was reduced in the presence of both types of SiO2 nanoparticles. Hardened concrete test results revealed that the optimal replacement level of cement by N series of SiO2 nanoparticles for producing concrete with considerably improved strength was set at 1.0 wt.% after curing in water. However, the ultimate strengths of binary blended concretes were gained at 2.0 wt.% replacement of cement by both series after curing in lime solution. It is concluded that SiO2 nanoparticles play significant roles in mechanical properties of concrete by formation of additional calcium silicate hydrate gel during treatment, which played an important role in raising highly the compressive strength of binary blends. The current study sheds light on the implications of nanotechnology in nano-engineering of concrete

    Easily manufactured TiO2 hollow fibers for quantum dot sensitized solar cells

    Get PDF
    TiO2 hollow fibers with high surface area were manufactured by a simple synthesis method, using natural cellulose fibers as template. The effective light scattering properties of the hollow fibers, originating from their micron size, were observed by diffuse reflectance spectroscopy. In spite of the micrometric length of the TiO2 hollow fibers, the walls were highly porous and high surface area (78.2 m2 g 1 ) was obtained by the BET method. TiO2 hollow fibers alone and mixed with other TiO2 pastes were sensitized with CdSe quantum dots (QDs) by Successive Ionic Layer Adsorption and Reaction (SILAR) and integrated as a photoanode in quantum dot sensitized solar cells (QDSCs). High power conversion efficiency was obtained, 3.24% (Voc = 503 mV, Jsc = 11.92 mA cm 2 , FF = 0.54), and a clear correspondence of the cell performance with the photoanode structure was observed. The unique properties of these fibers: high surface area, effective light scattering, hollow structure to facile electrolyte diffusion and the rather high efficiencies obtained here suggest that hollow fibers can be introduced as promising nanostructures to make highly efficient quantum dot sensitized solar cells

    Green synthesize of copper nanoparticles on the cotton fabric as a self-regenerating and high-efficient plasmonic solar evaporator

    No full text
    Abstract Harvesting solar energy, as a clean and abundant resource, in the photothermal process, is the winning point of solar steam generation (SSG) systems. Herein, copper plasmonic nanoparticles were synthesized through a green method via red sanders extraction on the cotton fabric as the reducing matrix. The prepared fabrics were analyzed using FESEM, EDS, XRD, PL, Raman, and contact angle. The treated fabric on the stitched PU foam with cotton yarns with bio-inspired jellyfish structure was used for heat localization and water transmission, simultaneously. The evaporation rate, enhancement, and conversion efficiency of the plasmonic SSG were 1.73 kg m−2 h−1, 179%, and ~ 98%, under one sun irradiation, respectively. The quality of the collected water was investigated via induced coupled plasma which presents the proper solar desalination (> 99.83% for filtration of Na+ ion). Regenerating features of the treated fabric along with the simple and cost-effective preparation method promises viable aspects of our system for large-scale applications

    Fabrication of Pd Doped WO3 Nanofiber as Hydrogen Sensor

    No full text
    Pd doped WO3 fibers were synthesized by electro-spinning. The sol gel method was employed to prepare peroxopolytungstic acid (P-PTA). Palladium chloride and Polyvinyl pyrrolidone (PVP) was dissolved in the sol Pd:WO3 = 10% molar ratio. The prepared sol was loaded into a syringe connected to a high voltage of 18.3 kV and electrospun fibers were collected on the alumina substrates. Scanning electron microscope (SEM), X-ray powder diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) techniques were used to analyze the crystal structure and chemical composition of the fibers after heat treatment at 500 °C. Resistance-sensing measurements exhibited a sensitivity of about 30 at 500 ppm hydrogen in air, and the response and recovery times were about 20 and 30 s, respectively, at 300 °C. Hydrogen gas sensing mechanism of the sensor was also studied

    Sensing behavior of flower-shaped MoS2 nanoflakes: case study with methanol and xylene

    No full text
    Recent research interest in two-dimensional (2D) materials has led to an emerging new group of materials known as transition metal dichalcogenides (TMDs), which have significant electrical, optical, and transport properties. MoS2 is one of the well-known 2D materials in this group, which is a semiconductor with controllable band gap based on its structure. The hydrothermal process is known as one of the scalable methods to synthesize MoS2 nanostructures. In this study, the gas sensing properties of flower-shaped MoS2 nanoflakes, which were prepared from molybdenum trioxide (MoO3) by a facile hydrothermal method, have been studied. Material characterization was performed using X-ray diffraction, Brunauer–Emmett–Teller surface area measurements, elemental analysis using energy dispersive X-ray spectroscopy, and field-emission scanning electron microscopy. The gas sensing characteristics were evaluated under exposure to various concentrations of xylene and methanol vapors. The results reveal higher sensitivity and shorter response times for methanol at temperatures below 200 °C toward 200 to 400 ppm gas concentrations. The sensing mechanisms for both gases are discussed based on simulation results using density functional theory and charge transfer

    Investigation on the dynamics of electron transport and recombination in TiO2 nanotube/nanoparticle composite electrodes for dye-sensitized solar cells

    No full text
    In this work, the fabrication and characterization are reported of dye-sensitized solar cells based on TiO2 nanotube/nanoparticle (NT/NP) composite electrodes. TiO2 nanotubes were prepd. by anodization of Ti foil in an org. electrolyte. The nanotubes were chem. sepd. from the foil, ground and added to a TiO2 nanoparticle paste, from which composite NT/NP electrodes were fabricated. In the composite TiO2 films the nanotubes existed in bundles with a length of a few micrometers. By optimizing the amt. of NT in the paste, dye-sensitized solar cells with an efficiency of 5.6% were obtained, a 10% improvement in comparison to solar cells with pure NP electrodes. By increasing the fraction of NT in the electrode the c.d. increased by 20% (from 11.1-13.3 mA cm-2), but the open circuit voltage decreased from 0.78-0.73 V. Electron transport, lifetime and extn. studies were performed to investigate this behavior. A higher fraction of NT in the paste led to more and deeper traps in the resulting composite electrodes. Nevertheless, faster electron transport under short-circuit conditions was found with increased NT content, but the electron lifetime was not improved. The electron diffusion length calcd. for short-circuit conditions was increased 3-fold in composite electrodes with an optimized NT fraction. The charge collection efficiency was more than 90% over a wide range of light intensities, leading to improved solar cell performance

    Comparison of Trap-state Distribution and Carrier Transport in Nanotubular and Nanoparticulate TiO2 Electrodes for Dye-Sensitized Solar Cells

    No full text
    Dye-sensitized solar cells (DSCs) with nanotubular TiO2 electrodes of varying thicknesses are compared to DSCs based on conventional nanoparticulate electrodes. Despite the higher degree of order in one-dimensional nanotubular electrodes, electron transport times and diffusion coeffs., detd. under short-circuit conditions, are comparable to those of nanoparticulate electrodes. The quasi-Fermi level, however, is much lower in the nanotubes, suggesting a lower concn. of conduction band electrons. This provides evidence for a much higher diffusion coeff. for conduction band electrons in nanotubes than in nanoparticulate films. The electron lifetime and the diffusion length are significantly longer in nanotubular TiO2 electrodes than in nanoparticulate films. Nanotubular electrodes have a trap distribution that differs significantly from nanoparticulate electrodes; they possess relatively deeper traps and have a characteristic energy of the exponential distribution that is more than two times that of nanoparticulate electrodes

    Effective Factors on Methane Sensing of Tin-Oxide Activated by Palladium in Sol-Gel Process

    No full text
    Stannic oxide thin films activated by palladium were prepared by sol-gel method. The morphology of the layers and the size of the particles were investigated by scanning electron microscopy and atomic force microscopy. Investigations showed that the number of coating, annealing procedure and the viscosity of the sol, affect structure and thickness of the layers. These different preparing conditions result in different change in resistivity of the samples toward methane gas. In addition to these parameters, the Pd/Sn atomic ratio in the sol is another effective factor on sensitivity of methane
    corecore