1,831 research outputs found
Monitoring of state of charge in MOS capacitors by pulsed photocurrent
Pulsed illumination of a biased MOS capacitor through windowed gates induces a photocurrent which can be used to monitor shifts of bias voltage, in response to a gaseous chemical stimulus. If collimation requirements are relaxed, to allow the use of comparatively simple LED light sources, increased window area must be adopted to compensate for the reduced light intensity. Experimental and modelled responses demonstrate that useful information may still be obtained, limited by the convolution of response with a finite beam diameter and constrained by window size.Iluminación pulsada sobre un capacitor MOS polarizado, a través de una compuerta con ventana induce una fotocorriente, que puede usarse para monitorear los corrimientos en polarización, en respuesta a un estímulo químico gaseoso. Si los requerimientos de colimación se relajan, para permitir el uso de fuentes de luz comparativamente simples, deben adoptarse ventanas de mayor área para compensar la reducción de la intensidad del haz. Tanto las respuestas experimentales como modeladas demuestran que puede aun obtenerse información útil, limitada por la convolución de la respuesta con el haz de diámetro finito y por el tamaño de la ventana.Fil: Lombardi, R.. Universidad de Buenos Aires. Facultad de Ingeniería; ArgentinaFil: Aragon, Ricardo. Consejo Nacional de Investigaciones Científicas y Técnicas. Instituto de Investigaciones Científicas y Técnicas de las Fuerzas Armadas. Centro de Investigaciones en Sólidos; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Instituto de Investigaciones Científicas y Técnicas para la Defensa. Centro de Investigación en Láseres y Aplicaciones; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Unidad de Investigación y Desarrollo Estratégico para la Defensa. Ministerio de Defensa. Unidad de Investigación y Desarrollo Estratégico para la Defensa; Argentin
Journal Staff
Electrical properties and strain gauge factor of Cr/SiOx cermet films with compositions 50/50 and 70/30 wt% were investigated in order to evaluate their use in strain gauge devices. The films were deposited by flash evaporation. The microstructures and resulting phases were characterized by electron diffraction and electron microscopy. The influence of the thickness and deposition rate on the sheet resistance, the temperature coefficient of resistance and the gauge factor were investigated. The results are consistent with a mixed conduction mechanism with metallic and a thermally activated tunneling components, between interconnected and discrete conductive phases, respectively.Se investigaron las propiedades eléctricas y el factor extensométrico de películas del cermet- Cr/SiOx en composiciones 50/50 y 70/30 % en peso, para evaluar su uso en dispositivos "strain gauge". Las películas fueron depositadas por evaporación "flash". Las estructuras y fases resultantes fueron caracterizadas por microscopía y difracción de electrones. Se estudió la influencia del espesor y la velocidad del depósito sobre la resistencia laminar, el coeficiente térmico de resistencia y el factor extensométrico. Los resultados son consistentes con un mecanismo de conducción mixto, con una componente metálica y otra por efecto túnel térmicamente activado, entre fases conductoras interconectadas y discretas, respectivamente
Maximum power, ecological function and efficiency of an irreversible Carnot cycle. A cost and effectiveness optimization
In this work we include, for the Carnot cycle, irreversibilities of linear
finite rate of heat transferences between the heat engine and its reservoirs,
heat leak between the reservoirs and internal dissipations of the working
fluid. A first optimization of the power output, the efficiency and ecological
function of an irreversible Carnot cycle, with respect to: internal temperature
ratio, time ratio for the heat exchange and the allocation ratio of the heat
exchangers; is performed. For the second and third optimizations, the optimum
values for the time ratio and internal temperature ratio are substituted into
the equation of power and, then, the optimizations with respect to the cost and
effectiveness ratio of the heat exchangers are performed. Finally, a criterion
of partial optimization for the class of irreversible Carnot engines is herein
presented.Comment: 17 pages, 4 figures. Submitted to Energy Convers. Manag
- …