77 research outputs found
Introduction to the Special Issue on Aerial Manipulation
The papers in this special section focus on aerial manipulation which is intended as grasping, positioning, assembling and disassembling of mechanical parts, measurement instruments and any other kind of objects, performed by a flying robot equipped with arms and grippers. Aerial manipulators can be helpful in those industrial and service applications that are considered very dangerous for a human operator. For instance, think of tasks like the inspection of a bridge, the inspection and the fixing-up of high-voltage electric lines, the repairing of rotor blades and so on. These tasks are both very unsafe and expensive because they require the performance of professional climbers and/or specialists in the field. A drone with manipulation capabilities can instead assist the human operator in these jobs or, at least, in the most hazardous and critical situations. As a matter of fact, such devices can indeed operate in dangerous tasks like reaching the bottom of the deck of a bridge or the highest places of a plant or a building; they can avoid dangerous work at height; aerial platforms can increase the total number of inspections of a plant, monitoring the wear of the components. Without doubts, aerial manipulation will improve the quality of the job of many workers
Aerial Manipulation: A Literature Review
Aerial manipulation aims at combining the versatil- ity and the agility of some aerial platforms with the manipulation capabilities of robotic arms. This letter tries to collect the results reached by the research community so far within the field of aerial manipulation, especially from the technological and control point of view. A brief literature review of general aerial robotics and space manipulation is carried out as well
Thermally-Resilient Soft Gripper for Space Debris Removal
Space debris poses a significant and growing threat to orbital operations,
demanding urgent solutions. Soft manipulators, with their adaptability to
various shapes and sizes, present a promising approach to mitigate this concern
and facilitate orbital maintenance tasks. Challenges such as radiation, vacuum,
and microgravity are significant, but the predominant issue is ensuring these
devices operate effectively in the extreme temperature swings from -180{\deg}C
to over 200{\deg}C. The majority of soft materials become brittle and hard due
to crystallization at cryogenic temperatures or undergo drastic shifts in their
elasticity near their melting points. This work pioneers experiments using
liquid nitrogen to simulate cryogenic conditions and heat guns for elevated
temperatures. It derives insights into the behavior of these materials, leading
to the design of a soft gripper tailored for space debris removal in LEO
orbits. The multi-layered design leverages the properties of thermoplastic
polyurethane at low infill rates for lightweight inherent flexibility, silicone
rubber ensuring structural integrity, PTFE (Teflon) for unparalleled thermal
stability, and aerogel for insulation. The nylon-crafted tendon-driven
mechanism incorporated uses molybdenum disulfide grease as a lubrication layer
for cryogenic temperatures. The insights from this experiments and the modeling
of the temperature-driven property alterations are pivotal for the advancement
of soft manipulators tailored for on-orbit operations.Comment: Submitted to ICRA 202
A novel concept for Titan robotic exploration based on soft morphing aerial robots
This work introduces a novel approach for Titan exploration based on soft
morphing aerial robots leveraging the use of flexible adaptive materials. The
controlled deformation of the multirotor arms, actuated by a combination of a
pneumatic system and a tendon mechanism, provides the explorer robot with the
ability to perform full-body perching and land on rocky, irregular, or uneven
terrains, thus unlocking new exploration horizons. In addition, after landing,
they can be used for efficient sampling as tendon-driven continuum
manipulators, with the pneumatic system drawing in the samples. The proposed
arms enable the drone to cover long distances in Titan's atmosphere
efficiently, by directing rotor thrust without rotating the body, reducing the
aerodynamic drag. Given that the exploration concept is envisioned as a
rotorcraft planetary lander, the robot's folding features enable over a 30
reduction in the hypersonic aeroshell's diameter. Building on this folding
capability, the arms can morph partially in flight to navigate tight spaces. As
for propulsion, the rotor design, justified through CFD simulations, utilizes a
ducted fan configuration tailored for Titan's high Reynolds numbers. The rotors
are integrated within the robot's deformable materials, facilitating smooth
interactions with the environment. The research spotlights exploration
simulations in the Gazebo environment, focusing on the Sotra-Patera cryovolcano
region, a location with potential to clarify Titan's unique methane cycle and
its Earth-like features. This work addresses one of the primary challenges of
the concept by testing the behavior of small-scale deformable arms under
conditions mimicking those of Titan. Groundbreaking experiments with liquid
nitrogen at cryogenic temperatures were conducted on various materials, with
Teflon (PTFE) at low infill rates (15-30%) emerging as a promising option.Comment: Presented at International Astronautical Congress 2023 (Baku,
Azerbaiyan
Unsteady Propulsion of a Two-Dimensional Flapping Thin Airfoil in a Pulsating Stream.
The cruising velocity of animals, or robotic vehicles, that use flapping wings or fins to propel themselves is not
constant but oscillates around a mean value with an amplitude usually much smaller than the mean, and a frequency
that typically doubles the flapping frequency. Quantifying the effect that these velocity fluctuations may have on
the propulsion of a flapping and oscillating airfoil is of great relevance to properly modeling the self-propelled
performance of these animals or robotic vehicles. This is the objective of the present work, where the force and
moment that an oscillating stream exerts on a two-dimensional pitching and heaving airfoil are obtained analytically
using the vortical impulse theory in the linear potential flow limit. The thrust force of the flapping airfoil in a pulsating
stream in this limit is obtained here for the first time. The lift force and moment derived here contain new terms in
relation to the pioneering work by Greenberg (1947), which are shown quantitatively unimportant. The theoretical
results obtained here are compared with existing computational data for flapping foils immersed in a stream with
velocity oscillating sinusoidally about a mean value.The authors acknowledge support from the Advanced Grant of the European Research Council GRIFFIN, Action 788247, and from the Junta de Andalucía, Spain, Grant UMA18-FEDER-JA-047. Ernesto Sanchez-Laulhe also acknowledges his predoctoral contract at the University of Malaga
AWARE: Platform for Autonomous self-deploying and operation of Wireless sensor-actuator networks cooperating with unmanned AeRial vehiclEs
This paper presents the AWARE platform that seeks to enable the cooperation of autonomous aerial vehicles with ground wireless sensor-actuator networks comprising both static and mobile nodes carried by vehicles or people. Particularly, the paper presents the middleware, the wireless sensor network, the node deployment by means of an autonomous helicopter, and the surveillance and tracking functionalities of the platform. Furthermore, the paper presents the first general experiments of the AWARE project that took place in March 2007 with the assistance of the Seville fire brigades
ASAP: Adaptive Scheme for Asynchronous Processing of Event-based Vision Algorithms
Event cameras can capture pixel-level illumination changes with very high
temporal resolution and dynamic range. They have received increasing research
interest due to their robustness to lighting conditions and motion blur. Two
main approaches exist in the literature to feed the event-based processing
algorithms: packaging the triggered events in event packages and sending them
one-by-one as single events. These approaches suffer limitations from either
processing overflow or lack of responsivity. Processing overflow is caused by
high event generation rates when the algorithm cannot process all the events in
real-time. Conversely, lack of responsivity happens in cases of low event
generation rates when the event packages are sent at too low frequencies. This
paper presents ASAP, an adaptive scheme to manage the event stream through
variable-size packages that accommodate to the event package processing times.
The experimental results show that ASAP is capable of feeding an asynchronous
event-by-event clustering algorithm in a responsive and efficient manner and at
the same time prevents overflow
Experimental method for perching flapping-wing aerial robots
In this work, we present an experimental setup and guide to enable the
perching of large flapping-wing robots. The combination of forward flight,
limited payload, and flight oscillations imposes challenging conditions for
localized perching. The described method details the different operations that
are concurrently performed within the 4 second perching flight. We validate
this experiment with a 700 g ornithopter and demonstrate the first autonomous
perching flight of a flapping-wing robot on a branch. This work paves the way
towards the application of flapping-wing robots for long-range missions, bird
observation, manipulation, and outdoor flight.Comment: IROS 2022 Workshop: Agile Robotics: Perception, Learning, Planning,
and Control, 202
- …