226 research outputs found
Recommended from our members
Laser Plasma instability reduction by coherence disruption
The saturation levels of stimulated scattering of intense laser light in plasmas and techniques to reduce these levels are of great interest. A simple model is used to highlight the dependence of the reflectivity on the coherence length for the density fluctuations producing the scattering. Sometimes the coherence lengths can be determined nonlinearly. For NIF hohlraum plasmas, a reduction in the coherence lengths might be engineered in several ways. Finally, electron trapping in ion sound waves is briefly examined as a potentially important effect for the saturation of stimulated Brillouin scattering
Recommended from our members
Highly-resolved 2D HYDRA simulations of Double-Shell Ignition Designs
Double-shell (DS) targets (Amendt, P. A. et al., 2002) offer a complementary approach to the cryogenic baseline design (Lindl, J. et al., 2004) for achieving ignition on the National Ignition Facility (NIF). Among the expected benefits are the ease of room temperature preparation and fielding, the potential for lower laser backscatter and the reduced need for careful shock timing. These benefits are offset, however, by demanding fabrication tolerances, e.g., shell concentricity and shell surface smoothness. In particular, the latter is of paramount importance since DS targets are susceptible to the growth of interface perturbations from impulsive and time-dependent accelerations. Previous work (Milovich, J. L. et al., 2004) has indicated that the growth of perturbations on the outer surface of the inner shell is potentially disruptive. To control this instability new designs have been proposed requiring bimetallic inner shells and material-matching mid-Z nanoporous foam. The challenges in manufacturing such exotic foams have led to a further evaluation of the densities and pore sizes needed to reduce the seeding of perturbations on the outer surface of the inner shell, thereby guiding the ongoing material science research efforts. Highly-resolved 2D simulations of porous foams have been performed to establish an upper limit on the allowable pore sizes for instability growth. Simulations indicate that foams with higher densities than previously thought are now possible. Moreover, while at the present time we are only able to simulate foams with average pore sizes larger than 1 micron (due to computational limitations), we can conclude that these pore sizes are potentially problematic. Furthermore, the effect of low-order hohlraum radiation asymmetries on the growth of intrinsic surface perturbations is also addressed. Highly-resolved 2D simulations indicate that the transverse flows that are set up by these low-order mode features (which can excite Kelvin-Helmholtz instabilities) are not large enough to offset the overall robustness of our current design
Assessment of ion kinetic effects in shock-driven inertial confinement fusion implosions using fusion burn imaging
The significance and nature of ion kinetic effects in D3He-filled, shock-driven inertial confinement
fusion implosions are assessed through measurements of fusion burn profiles. Over this series of
experiments, the ratio of ion-ion mean free path to minimum shell radius (the Knudsen number,
NK) was varied from 0.3 to 9 in order to probe hydrodynamic-like to strongly kinetic plasma
conditions; as the Knudsen number increased, hydrodynamic models increasingly failed to match
measured yields, while an empirically-tuned, first-step model of ion kinetic effects better captured
the observed yield trends [Rosenberg et al., Phys. Rev. Lett. 112, 185001 (2014)]. Here, spatially
resolved measurements of the fusion burn are used to examine kinetic ion transport effects in
greater detail, adding an additional dimension of understanding that goes beyond zero-dimensional
integrated quantities to one-dimensional profiles. In agreement with the previous findings, a comparison
of measured and simulated burn profiles shows that models including ion transport effects
are able to better match the experimental results. In implosions characterized by large Knudsen
numbers (NK3), the fusion burn profiles predicted by hydrodynamics simulations that exclude
ion mean free path effects are peaked far from the origin, in stark disagreement with the experimentally
observed profiles, which are centrally peaked. In contrast, a hydrodynamics simulation that
includes a model of ion diffusion is able to qualitatively match the measured profile shapes.
Therefore, ion diffusion or diffusion-like processes are identified as a plausible explanation of the
observed trends, though further refinement of the models is needed for a more complete and
quantitative understanding of ion kinetic effects
Recommended from our members
Extended Rayleigh model of bubble evolution with material strength compared to detailed dynamic simulations
The validity of an extended Rayleigh model for laser generated bubbles in soft tissue is examined. This model includes surface tension, viscosity, a realistic water equation of state, material strength and failure, stress wave emission, and linear growth of interface instabilities. It is compared to dynamic simulations using LATIS, which include stress wave propagation, water equation of state, material strength and failure, and viscosity. The model and the simulations are compared using 1-D spherical geometry with bubble in center and a 2-D cylindrical geometry of a laser fiber in water with a bubble formed at the end of the fiber. The model executes over 300x faster on computer than the dynamic simulations
Recommended from our members
Assessing the Prospects for Achieving Double-Shell Ignition on the National Ignition Facility Using Vacuum Hohlraums
The goal of demonstrating ignition on the National Ignition Facility (NIF) has motivated a revisit of double-shell (DS) targets as a complementary path to the cryogenic baseline approach. Expected benefits of DS ignition targets include non-cryogenic deuterium-tritium (DT) fuel preparation, minimal hohlraum-plasma mediated laser backscatter, low threshold ignition temperatures ({approx} 4 keV) for relaxed hohlraum x-ray flux asymmetry tolerances, and minimal (two-) shock timing requirements. On the other hand, DS ignition presents several formidable challenges, encompassing room-temperature containment of high-pressure DT ({approx} 790 atm) in the inner shell, strict concentricity requirements on the two shells (< 3 {micro}m), development of nano-porous (<100 nm) low-density (<100 mg/cc) metallic foams for structural support of the inner shell and hydrodynamic instability mitigation, and effective control of hydrodynamic instabilities on the high-Atwood number interface between the DT fuel and the high-Z inner shell. Recent progress in DS ignition designs and required materials-science advances at the nanoscale are described herein. Two new ignition designs that use rugby-shaped vacuum hohlraums are presented which utilize either 1 MJ or 2 MJ of laser energy at 3{omega}. The capability of the NIF to generate the requested reverse-ramp pulse shape for DS ignition is expected to be comparable to the planned high-contrast ({approx}100) pulse-shape at 1.8 MJ for the baseline cryogenic target. Nano-crystalline, high-strength, Au-Cu alloy inner shells are under development using electrochemical deposition over a glass mandrel, exhibiting tensile strengths well in excess of 790 atm. Novel, low-density (85 mg/cc) copper foams have recently been demonstrated using 10 mg/cc SiO{sub 2} nano-porous aerogels with suspended Cu particles. A prototype demonstration of an ignition DS is planned for 2008, incorporating the needed novel nano-materials science developments and the required fabrication tolerances for a realistic ignition attempt after 2010
Recommended from our members
Computational modeling of stress transient and bubble evolution in short-pulse laser irradiated melanosome particles
Objective is to study retinal injury by subnanosecond laser pulses absorbed in the retinal pigment epithelium (RPE) cells. The absorption centers in the RPE cell are melanosomes of order 1 {mu}m radius. Each melanosome includes many melanin particles of 10-15 nm radius, which are the local absorbers of the laser light and generate a discrete structure of hot spots. This work use the hydrodynamic code LATIS (LAser-TISsue interaction modeling) and a water equation of state to first simulate the small melanin particle of 15 nm responsible for initiating the hot spot and the pressure field. A average melanosome of 1 {mu}m scale is next simulated. Supersonic shocks and fast vapor bubbles are generated in both cases: the melanin scale and the melanosome scale. The hot spot induces a shock wave pressure than with a uniform deposition of laser energy. It is found that an absorption coefficient of 6000 -8000 cm{sup -1} can explain the enhanced shock wave emitted by the melanosome. An experimental and theoretical effort should be considered to identify the mechanism for generating shock wave enhancement
Recommended from our members
Simulations of laser-initiated stress waves
We present a study of the short-time scale (< 250 ns) fluid dynamic response of water to a fiber-delivered laser pulse of variable energy and spatial profile. The laser pulse was deposited on a stress confinement time scale. The spatial profile was determined by the fiber core radius r (110 and 500 microns) and the water absorption coefficient {mu}{sub 2} (200 and 50 l/cm). Considering 2D cylindrical symmetry, the combination of fiber radius and absorption coefficient parameters can be characterized as near planar (1{mu}{sub 2} greater than r), symmetric (1/{mu}{sub 2}=r), and side-directed (1/{mu}{sub 2} less than r). The spatial profile study shows how the stress wave various as a function of geometry. For example, relatively small absorption coefficients can result in side-propagating shear and tensile fields
Tabletop X-ray Lasers
Details of schemes for two tabletop size x‐ray lasers that require a high‐intensity short‐pulse driving laser are discussed. The first is based on rapid recombination following optical‐field ionization. Analytical and numerical calculations of the output properties are presented. Propagation in the confocal geometry is discussed and a solution for x‐ray lasing in Li‐like N at 247 Å is described. Since the calculated gain coefficient depends strongly on the electron temperature, the methods of calculating electron heating following field ionization are discussed. Recent experiments aimed at demonstrating lasing in H‐like Li at 135 Å are discussed along with modeling results. The second x‐ray laser scheme is based on the population inversion obtained during inner‐shell photoionization by hard x rays. This approach has significantly higher‐energy requirements, but lasing occurs at very short wavelengths (λ ≤ 15 Å). Experiments that are possible with existing lasers are discussed
Scaled laboratory experiments explain the kink behaviour of the Crab Nebula jet
The remarkable discovery by the Chandra X-ray observatory that the Crab nebula's jet periodically changes direction provides a challenge to our understanding of astrophysical jet dynamics. It has been suggested that this phenomenon may be the consequence of magnetic fields and magnetohydrodynamic instabilities, but experimental demonstration in a controlled laboratory environment has remained elusive. Here we report experiments that use high-power lasers to create a plasma jet that can be directly compared with the Crab jet through well-defined physical scaling laws. The jet generates its own embedded toroidal magnetic fields; as it moves, plasma instabilities result in multiple deflections of the propagation direction, mimicking the kink behaviour of the Crab jet. The experiment is modelled with three-dimensional numerical simulations that show exactly how the instability develops and results in changes of direction of the jet
Recommended from our members
Monte Carlo Simulations of Arterial Imaging with Optical Coherence Tomography
The laser-tissue interaction code LATIS [London et al., Appl. Optics 36, 9068 ( 1998)] is used to analyze photon scattering histories representative of optical coherence tomography (OCT) experiment performed at Lawrence Livermore National Laboratory. Monte Carlo photonics with Henyey-Greenstein anisotropic scattering is implemented and used to simulate signal discrimination of intravascular structure. An analytic model is developed and used to obtain a scaling law relation for optimization of the OCT signal and to validate Monte Carlo photonics. The appropriateness of the Henyey-Greenstein phase function is studied by direct comparison with more detailed Mie scattering theory using an ensemble of spherical dielectric scatterers. Modest differences are found between the two prescriptions for describing photon angular scattering in tissue. In particular, the Mie scattering phase functions provide less overall reflectance signal but more signal contrast compared to the Henyey-Greenstein formulation
- …