2,893 research outputs found

    The PADME electromagnetic calorimeter

    Get PDF
    The PADME experiment, hosted at Laboratori Nazionali di Frascati in Italy, is going to start its data taking in September 2018. It is designed to search for the Dark Photon (indicated by the symbol A′), an hypothetical particle that can explain the Dark Matter elusiveness, possibly produced in the reaction e + e - → A′ γ. Together with the target, the segmented electromagnetic calorimeter is the most important component of the experiment, since it is needed to detect the recoil photon energy and position, in such a way to measure the A′ mass. It will consist of 616 2.1 × 2.1 × 23.0 cm3 BGO crystals arranged in a cylindrical shape and read by HZC photomultipliers with a diameter of 1.9 cm. Here we present the results obtained during the measurements performed on the scintillating units with a radioactive source and test beams, together with an overall description of the entire experiment

    Measurement of J/ψ production in association with a W ± boson with pp data at 8 TeV

    Get PDF
    A measurement of the production of a prompt J/ψ meson in association with a W± boson with W± → μν and J/ψ → μ+μ− is presented for J/ψ transverse momenta in the range 8.5–150 GeV and rapidity |yJ/ψ| < 2.1 using ATLAS data recorded in 2012 at the LHC. The data were taken at a proton-proton centre-of-mass energy of s = 8 TeV and correspond to an integrated luminosity of 20.3 fb−1. The ratio of the prompt J/ψ plus W± cross-section to the inclusive W± cross-section is presented as a differential measurement as a function of J/ψ transverse momenta and compared with theoretical predictions using different double-parton-scattering cross-sections. [Figure not available: see fulltext.]

    Observation of an Excited Bc+ State

    Get PDF
    Using pp collision data corresponding to an integrated luminosity of 8.5 fb-1 recorded by the LHCb experiment at center-of-mass energies of s=7, 8, and 13 TeV, the observation of an excited Bc+ state in the Bc+π+π- invariant-mass spectrum is reported. The observed peak has a mass of 6841.2±0.6(stat)±0.1(syst)±0.8(Bc+) MeV/c2, where the last uncertainty is due to the limited knowledge of the Bc+ mass. It is consistent with expectations of the Bc∗(2S31)+ state reconstructed without the low-energy photon from the Bc∗(1S31)+→Bc+γ decay following Bc∗(2S31)+→Bc∗(1S31)+π+π-. A second state is seen with a global (local) statistical significance of 2.2σ (3.2σ) and a mass of 6872.1±1.3(stat)±0.1(syst)±0.8(Bc+) MeV/c2, and is consistent with the Bc(2S10)+ state. These mass measurements are the most precise to date

    Characterisation and performance of the PADME electromagnetic calorimeter

    Get PDF
    The PADME experiment at the LNF Beam Test Facility searches for dark photons produced in the annihilation of positrons with the electrons of a fixed target. The strategy is to look for the reaction e+ + e− → γ + A0, where A0 is the dark photon, which cannot be observed directly or via its decay products. The electromagnetic calorimeter plays a key role in the experiment by measuring the energy and position of the final-state γ. The missing four-momentum carried away by the A0 can be evaluated from this information and the particle mass inferred. This paper presents the design, construction, and calibration of the PADME’s electromagnetic calorimeter. The results achieved in terms of equalisation, detection efficiency and energy resolution during the first phase of the experiment demonstrate the effectiveness of the various tools used to improve the calorimeter performance with respect to earlier prototypes

    Tracking of charged particles with nanosecond lifetimes at LHCb

    Get PDF
    A method is presented to reconstruct charged particles with lifetimes between 10ps and 10ns, which considers a combination of their decay products and the partial tracks created by the initial charged particle. Using the Ξ- baryon as a benchmark, the method is demonstrated with simulated events and proton-proton collision data at s=13TeV, corresponding to an integrated luminosity of 2.0fb-1 collected with the LHCb detector in 2018. Significant improvements in the angular resolution and the signal purity are obtained. The method is implemented as part of the LHCb Run 3 event trigger in a set of requirements to select detached hyperons. This is the first demonstration of the applicability of this approach at the LHC, and the first to show its scaling with instantaneous luminosity

    Multiplicity dependence of σ ψ (2 S ) /σ J/ψ in pp collisions at s = 13 TeV

    Get PDF
    The ratio of production cross-sections of ψ(2S) over J/ψ mesons as a function of charged-particle multiplicity in proton-proton collisions at a centre-of-mass energy s = 13 TeV is measured with a data sample collected by the LHCb detector, corresponding to an integrated luminosity of 658 pb−1. The ratio is measured for both prompt and non-prompt ψ(2S) and J/ψ mesons. When there is an overlap between the rapidity ranges over which multiplicity and charmonia production are measured, a multiplicity-dependent modification of the ratio is observed for prompt mesons. No significant multiplicity dependence is found when the ranges do not overlap. For non-prompt production, the ψ(2S)-to-J/ψ production ratio is roughly independent of multiplicity, irrespective of the rapidity range over which the multiplicity is measured. The results are compared to predictions of the co-mover model and agree well except in the low multiplicity region. The ratio of production cross-sections of ψ(2S) over J/ψ mesons are cross-checked with other measurements in di-lepton channels and found to be compatible

    Commissioning of the PADME experiment with a positron beam

    Get PDF
    The PADME experiment is designed to search for a hypothetical dark photon A' produced in positron-electron annihilation using a bunched positron beam at the Beam Test Facility of the INFN Laboratori Nazionali di Frascati. The expected sensitivity to the A'-photon mixing parameter ϵ is 10-3, for A' mass ≤ 23.5 MeV/c 2 after collecting ∼1013 positrons-on-target. This paper presents the PADME detector status after commissioning in July 2019. In addition, the software algorithms employed to reconstruct physics objects, such as photons and charged particles, and the calibration procedures adopted are illustrated in detail. The results show that the experimental apparatus reaches the design performance, and is able to identify and measure standard electromagnetic processes, such as positron bremsstrahlung and electron-positron annihilation into two photons

    First observation of the Λ b 0 → D + D − Λ decay

    Get PDF
    The Λb0 → D+D−Λ decay is observed for the first time using proton-proton collision data collected by the LHCb experiment at a center-of-mass energy of 13 TeV, corresponding to an integrated luminosity of 5.3 fb−1. Using the B0 → D+D−KS0 decay as a reference channel, the product of the relative production cross-section and decay branching fractions is measured to beR=σΛb0σB0=BΛb0→D+D−ΛBB0→D+D−KS0=0.179±0.022±0.014, where the first uncertainty is statistical and the second is systematic. The known branching fraction of the reference channel, BB0→D+D−KS0, and the cross-section ratio, σΛb0/σB0, previously measured by LHCb are used to derive the branching fraction of the Λb0→ D+D−Λ decayBΛb0→D+D−Λ=1.24±0.15±0.10±0.28±0.11×10−4, where the third and fourth contributions are due to uncertainties of BB0→D+D−KS0 and σΛb0/σB0, respectively. Inspection of the D+Λ and D+D− invariant-mass distributions suggests a rich presence of intermediate resonances in the decay. The Λb0 → D*+D−Λ decay is also observed for the first time as a partially reconstructed component in the D+D−Λ invariant mass spectrum
    corecore