43 research outputs found

    Compositional zoning of garnet porphyroblasts from the polymetamorphic Wölz Complex, Eastern Alps

    Get PDF
    We employ garnet isopleth thermobarometry to derive the P-T conditions of Permian and Cretaceous metamorphism in the Wölz crystalline Complex of the Eastern Alps. The successive growth increments of two distinct growth zones of the garnet porphyroblasts from the Wölz Complex indicate garnet growth in the temperature interval of 540°C to 560°C at pressures of 400 to 500MPa during the Permian and temperatures ranging from 550°C to 570°C at pressures in the range of 700 to 800MPa during the Cretaceous Eo-Alpine event. Based on diffusion modelling of secondary compositional zoning within the outermost portion of the first garnet growth zone constraints on the timing of the Permian and the Eo-Alpine metamorphic events are derived. We infer that the rocks remained in a temperature interval between 570°C and 610°C over about 10 to 20Ma during the Permian, whereas the high temperature stage of the Eo-Alpine event only lasted for about 0.2Ma. Although peak metamorphic temperatures never exceeded 620°C, the prolonged thermal annealing during the Permian produced several 100µm wide alteration halos in the garnet porphyroblasts and partially erased their thermobarometric memory. Short diffusion profiles which evolved around late stage cracks within the first garnet growth zone constrain the crack formation to have occurred during cooling below about 450°C after the Eo-Alpine even

    Potassium self-diffusion in a K-rich single-crystal alkali feldspar

    Full text link
    The paper reports potassium diffusion measurements performed on gem-quality single-crystal alkali feldspar in the temperature range from 11691169 to 1021 \, \mbox{K}. Natural sanidine from Volkesfeld, Germany was implanted with \mbox{}^{43}\mbox{K} at the ISOLDE/CERN radioactive ion-beam facility normal to the (001) crystallographic plane. Diffusion coefficients are well described by the Arrhenius equation with an activation energy of 2.4 \, \mbox{eV} and a pre-exponential factor of 5\times10^{-6} \, \mbox{m}^{2}/\mbox{s}, which is more than three orders of magnitude lower than the \mbox{}^{22}\mbox{Na} diffusivity in the same feldspar and the same crystallographic direction. State-of-the-art considerations including ionic conductivity data on the same crystal and Monte Carlo simulations of diffusion in random binary alloy structures point to a correlated motion of K and Na through the interstitialcy mechanism

    Intracrystalline microstructures in alkali feldspars from fluid-deficient felsic granulites: a mineral chemical and TEM study

    Get PDF
    Samples of essentially "dry” high-pressure felsic granulites from the Bohemian Massif (Variscan belt of Central Europe) contain up to 2-mm-large perthitic alkali feldspars with several generations of plagioclase precipitates in an orthoclase-rich host. The first generation takes the form of lenses homogeneous in size, whereas the size of a second generation of very thin albite-rich precipitates is more variable with comparatively high aspect ratios. In the vicinity of large kyanite, garnet or quartz inclusions, the first generation of plagioclase precipitates is significantly less abundant, the microstructure is coarser than in the remainder of the perthitic grain and the host is a tweed orthoclase. The first generation of precipitates formed at around 850°C during the high-pressure stage (16-18kbar) of metamorphism. Primary exsolution was followed by primary coarsening of the plagioclase precipitates, which still took place at high temperatures (850-700°C). The coarsening was pronounced due to the access of fluids in the outer portions of the perthitic alkali feldspar and in more internal regions around large inclusions. The second generation of albite-rich precipitates was formed at around 570°C. TEM investigations revealed that the interfaces between the second-generation plagioclase lamellae and the orthoclase-rich host are coherent or semi-coherent. During late evolutionary stages of the perthite, albite linings were formed at phase boundaries, and the perthitic microstructure was partially replaced by irregularly shaped precipitates of pure albite with incoherent interfaces. The albitization occurred below 400°C and was linked to fluid infiltration in the course of deuteric alteration. Based on size-distribution analysis, it is inferred that the precipitates of the first generation were most probably formed by spinodal decomposition, whereas the precipitates of the second generation rather were formed by nucleation and growt

    The Glarus thrust: excursion guide and report of a field trip of the Swiss Tectonic Studies Group (Swiss Geological Society, 14.-16. 09. 2006)

    Get PDF
    Participants: Ansorge Jörg (ETHZ) den Brok Bas (EAWAG-EMPA) Dèzes Pierre (SANW) Gonzalez Laura (University of Bern) Herwegh Marco (University of Bern) Hürzeler Jean-Pierre (University of Basel) Imper David (GeoPark) Mancktelow Neil (ETHZ) Mullis Josef (University of Basel) Nyffenegger Franziska (Fachhochschule Burgdorf, University of Bern) Pfiffner Adrian (University of Bern) Schreurs Guido (University of Bern) Schmalholz Stefan (ETHZ) Schmid Stefan (University of Basel) Wiederkehr Michael (University of Basel) Wilson Christopher (Melbourne University) Wilson Lilian (Melbourne University

    How water binds to microcline feldspar (001)

    Full text link
    Microcline feldspar (KAlSi3_3O8_8) is a common mineral with important roles for Earth's ecological balance. It participates in the carbon, potassium, and water cycles, contributing to CO2_2 sequestration, soil formation, and atmospheric ice nucleation. To understand the fundamentals of these processes, it is essential to establish microcline's surface atomic structure and its interaction with the omnipresent water molecules. This work presents atomic-scale results on microcline's lowest-energy surface and its interaction with water, combining ultrahigh vacuum investigations by non-contact atomic force microscopy and X-ray photoelectron spectroscopy with density functional theory calculations. An ordered array of hydroxyls bonded to silicon or aluminum readily forms on the cleaved surface at room temperature. The distinct proton affinities of these hydroxyls influence the arrangement and orientation of the first water molecules binding to the surface, holding potential implications for the subsequent condensation of water.Comment: 14 pages, 5 figure

    Origin of Amphibole-Biotite-Fluorite-Rich Enclaves from Gabal El-Ineigi Fluorite-Bearing Granite, Central Eastern Desert of Egypt: Insights into Fluoride-Calcium and Silicate Liquid Immiscibility

    Get PDF
    Gabal El-Ineigi fluorite-bearing rare-metal granite with A-type affinity, located in the Central Eastern Desert of Egypt, is distinguished by its abundance of large fluorite-quartz veins and mafic enclaves. Plagioclase (labradorite to oligoclase), Mg-rich biotite, and Mg-rich hornblende are the main components of mafic enclaves, with significant amounts of fluorite as essential phases, and titanite and Fe-Ti oxides (Nb-free rutile and ilmenite-rutile solid solution) as the main accessories. These enclaves are monzodioritic in composition, Si-poor, and highly enriched in Ca, Fe, Mg, and F compared to the host alkali feldspar F-poor Si-rich granites. Given the conflicting evidence for a restitic, xenolithic, magma mixing/mingling, cumulate, or bimodal origin for these enclaves, we propose that the mafic enclaves and felsic host granites are two conjugate liquids, with contrasting compositions, of a single parental melt. This is inferred by the normalized REE patterns that are similar. As a result, liquid immiscibility is proposed as a probable explanation for this mafic–felsic rock association. These enclaves can be interpreted as transient melt phases between pure silicate and calcium-fluoride melts that are preserved from the early stages of separation before evolving into a pure fluoride (Ca-F) melt during magma evolution. Due to element partitioning related to melt unmixing, the enclaves are preferentially enriched in Ca, F, Li, Y, and REE and depleted in HFSE (such as Zr, U, Th, Ta, Nb, Hf, and Ga) in comparison to the host granites. Furthermore, mafic enclaves exhibit W-type tetrad effects, while host granites exhibit M-type tetrad effects, implying that the REE partitioning, caused by liquid immiscibility, is complementary

    Magmatic Evolution and Rare Metal Mineralization in Mount El-Sibai Peralkaline Granites, Central Eastern Desert, Egypt: Insights from Whole-Rock Geochemistry and Mineral Chemistry Data

    Get PDF
    The Ediacaran peralkaline granites, which were emplaced during the post-collisional tectonic extensional stage, have a limited occurrence in the northern tip of the Nubian Shield. In this contribution, we present new mineralogical and geochemical data of Mount El-Sibai granites from the Central Eastern Desert of Egypt. The aim is to discuss their crystallization condition, tectonic setting, and petrogenesis as well as the magmatic evolution of their associated mineralization. Mount El-Sibai consists of alkali-feldspar granites (AFGs) as a main rock unit with scattered and small occurrences of alkali-amphibole granites (AAGs) at the periphery. The AAG contain columbite, nioboaeschynite, zircon and thorite as important rare metal-bearing minerals. Geochemically, both of AFG and AAG exhibit a highly evolved nature with a typical peralkaline composition (A/CNK = 0.82–0.97) and formed in within-plate anorogenic setting associated with crustal extension and/or rifting. They are enriched in some LILEs (Rb, K, and Th) and HFSEs (Ta, Pb, Zr, and Y), but strongly depleted in Ba, Sr, P and Ti with pronounced negative Eu anomalies (Eu/Eu* = 0.07–0.34), consistent with an A-type granite geochemical signature. The calculated TZrn (774–878 °C) temperatures indicate that the magma was significantly hot, promoting the saturation of zircon. The texture and chemistry of minerals suggest that they were crystallized directly from a granitic magma and were later subject to late- to post-magmatic fluids. Both granitic types were most likely generated through partial melting of a juvenile crustal source followed by magmatic fractionation. The lithospheric delamination is the main mechanism which causes uplifting of the asthenospheric melts and hence provides enough heat for crustal melting. The produced parent magma was subjected to prolonged fractional crystallization to produce the different types of Mount El-Sibai granites at different shallow crustal levels. During magma fractionation, the post-magmatic fluids (especially fluorine) contribute significantly to the formation of rare metal mineralization within Mount El-Sibai granites

    Fluid flow and rock alteration along the Glarus thrust

    No full text
    Chemical alteration of rocks along the Glarus overthrust reflects different stages of fluid rock interaction associated with thrusting. At the base of the Verrucano in the hanging wall of the thrust, sodium was largely removed during an early stage of fluid-rock interaction, which is ascribed to thrust-parallel fluid flow in a damage zone immediately above the thrust. This alteration leads to the formation of white mica at the expense of albite-rich plagioclase and potassium feldspar. This probably enhanced mechanical weakening of the Verrucano base allowing for progressive strain localization. At a later stage of thrusting, fluid-mediated chemical exchange between the footwall and the hanging wall lithologies produced a second generation of alteration phenomena. Reduction of ferric iron oxides at the base of the Verrucano indicates fluid supply from the underlying flysch units in the northern section of the thrust. Fluid supply from the footwall may have kept pore fluid pressure close to lithostatic and enhanced cataclastic deformation. The chemical characteristics of the Lochseiten calc-tectonite suggest its derivation from Mesozoic limestone. In the southern sections of the thrust, the major element and stable isotope compositions show continuous trends from the Cretaceous limestone in the footwall of the thrust up to the contact with the Verrucano, indicating that the calc-tectonite developed due to progressive deformation from the footwall units. In the northern sections of the thrust, the Lochseiten calctectonite has a distinct chemical and stable isotope signature, which suggests that it is largely derived from Infrahelvetic slices, i.e. decapitated fragments of the footwall limestone from the southern sections of the thrust, which were tectonically emplaced along the thrust further north. Only at the Lochseiten type locality the original chemical and stable isotope signatures of the calctectonite were completely obliterated during intense reworking b
    corecore