Vulnerability assessment and feasibility analysis of seismic strengthening of school buildings

The majority of structures in seismic-prone areas worldwide are structures that have been designed either without seismic design considerations, or using codes of practice that are seriously inadequate in the light of current seismic design principles. In Cyprus, after a series of earthquakes that occurred between 1995 and 1999, it was decided to carry out an unprecedented internationally seismic retrofitting of all school buildings, taking into account the sensitivity of the society towards these structures. In this paper representative school buildings are analysed in both their pristine condition and after applying retrofitting schemes typical of those implemented in the aforementioned large-scale strengthening programme. Non-linear analysis is conducted on calibrated analytical models of the selected buildings and fragility curves are derived for typical reinforced concrete and unreinforced masonry structures. These curves are then used to carry out a feasibility study, including both benefit-cost and life-cycle analysis, and evaluate the effectiveness of the strengthening programme

Performance-Based Seismic Design and Assessment of Bridges

Current trends in the seismic design and assessment of bridges are discussed, with emphasis on two procedures that merit some particular attention, displacement-based procedures and deformation-based procedures. The available performance-based methods for bridges are critically reviewed and a number of critical issues are identified, which arise in all procedures. Then two recently proposed methods are presented in some detail, one based on the direct displacement-based design approach, using equivalent elastic analysis and properly reduced displacement spectra, and one based on the deformation-based approach, which involves a type of partially inelastic response-history analysis for a set of ground motions and wherein pier ductility is included as a design parameter, along with displacement criteria. The current trends in seismic assessment of bridges are then summarised and the more rigorous assessment procedure, i.e. nonlinear dynamic response-history analysis, is used to assess the performance of bridges designed to the previously described procedures. Finally some comments are offered on the feasibility of including such methods in the new generation of bridge codes

Preliminary design of seismically isolated R/C highway overpasses- Features of relevant software and experimental testing of elastomeric bearings

The preliminary design of seismically isolated R/C highway overpasses is the tar-get of a software based on the current design provisions of Eurocode 8 (Part 2) as well as on engineering decisions included in the expert system. The features of this expert system, which is aimed to facilitate the design of a highway overpass by isolating its deck with the inclusion of elastomeric bearings, are presented and discussed. For such an upgrade scheme a number of successive checks is necessary in order to select an optimum geometry of the bearings. The developed software includes a series of checks provided by Eurocode 8 (Part 2), in order to ensure the satisfactory seismic performance of the selected upgrade scheme. In doing so, the software accesses a specially created database of the geometrical and mechanical character-istics of either cylindrical or prismatic elastometallic bearings which are commercially avail-able; this database can be easily enriched by relevant data from laboratory tests on isolation devices. The basic assumptions included in the software are (a) modeling the seismic re-sponse of the bridge overpass as a SDOF system, and (b) only the longitudinal direction re-sponse is considered; it is common practice for seismically isolated bridge systems to restrain the transverse movement of the deck by stoppers. Moreover, the results form a number of tests performed in the Laboratory of Strength of Materials and Structures of Aristotle Univer-sity, verified the quality of the production process of a local producer of elastomeric bearings subjecting production samples to the sequence of tests specified by International Standard ISO 22762-1 (2005). Strain amplitudes larger than 250% resulted in the debonding of the elastomer from the steel plating. Artificial aging resulted in a small increase of the axial (ver-tical) stiffness and a small decrease of the shear (horizontal) stiffness of the tested bearings. More specimens must be tested to validate further these findings

A knowledge-based software for the preliminary design of seismically isolated bridges

Seismic design of isolated bridges involves conceptual, preliminary and detailed structural design. However, despite the variety of commercial software currently available for the analysis and design of such systems, conceptual and preliminary design can prove to be a non-straightforward procedure because of the sensitivity of bridge response on the initial decisions made by the designer of the location, number and characteristics of the bearings placed, as well as on a series of broader criteria such as serviceability, target performance level and cost-effectiveness of the various design alternatives. Given the lack of detailed design guidelines to ensure, at this preliminary stage, compliance with the above requirements, a "trial and error" procedure is typically followed in the design office to decide on the most appropriate design scheme in the number and location of the bearing systems; the latter typically based on engineering judgment to balance performance with cost. To this end, the particular research effort aims to develop a decision-making system for the optimal preliminary design of seismically isolated bridges, assumed to respond as single degree of freedom (SDOF) systems. The proposed decision-making process is based on the current design provisions of Eurocode 8, but is complemented by additional criteria set according to expert judgment, laboratory testing and recent research findings, while using a combined cost/performance criterion to select from a database of bearings available on the international market. Software is also developed for the implementation of the system. The paper concludes with the application, and essentially the validation of the methodology and software developed through more rigorous MDOF numerical analysis for the case of a real bridge. © Springer Science+Business Media B.V. 2011

Preliminary design of seismically isolated R/C highway overpasses- Features of relevant software and experimental testing of elastomeric bearings

The preliminary design of seismically isolated R/C highway overpasses is the tar-get of a software based on the current design provisions of Eurocode 8 (Part 2) as well as on engineering decisions included in the expert system. The features of this expert system, which is aimed to facilitate the design of a highway overpass by isolating its deck with the inclusion of elastomeric bearings, are presented and discussed. For such an upgrade scheme a number of successive checks is necessary in order to select an optimum geometry of the bearings. The developed software includes a series of checks provided by Eurocode 8 (Part 2), in order to ensure the satisfactory seismic performance of the selected upgrade scheme. In doing so, the software accesses a specially created database of the geometrical and mechanical character-istics of either cylindrical or prismatic elastometallic bearings which are commercially avail-able; this database can be easily enriched by relevant data from laboratory tests on isolation devices. The basic assumptions included in the software are (a) modeling the seismic re-sponse of the bridge overpass as a SDOF system, and (b) only the longitudinal direction re-sponse is considered; it is common practice for seismically isolated bridge systems to restrain the transverse movement of the deck by stoppers. Moreover, the results form a number of tests performed in the Laboratory of Strength of Materials and Structures of Aristotle Univer-sity, verified the quality of the production process of a local producer of elastomeric bearings subjecting production samples to the sequence of tests specified by International Standard ISO 22762-1 (2005). Strain amplitudes larger than 250% resulted in the debonding of the elastomer from the steel plating. Artificial aging resulted in a small increase of the axial (ver-tical) stiffness and a small decrease of the shear (horizontal) stiffness of the tested bearings. More specimens must be tested to validate further these findings

Software for the preliminary design of seismically isolated R/C highway overpass bridges

The features of an expert system, developed for the pre-design of highway overpass R/C bridges, are presented and discussed. This system is implemented into a software and is aimed to facilitate the seismic upgrading of an overpass by isolating its deck with the inclusion of elastomeric bearings. The preliminary design of such an upgrade scheme is the target of this software based on the current design provisions of Eurocode 8 (Part 2) as well as on engineering decisions included in the expert system; it can also be extended easily to comply with alternative design provisions. The developed software is connected with a database of typically used steel laminated rubber bearings and relevant laboratory test results and it performs a series of checks according to Eurocode 8, in order to ensure the satisfactory seismic performance of the selected upgrade scheme. The parameters that are addressed within this software as independent variables are: the geometry of the overpass, the number of bearings at each deck support, the level of seismic action and the characteristics of the bearings (i.e. their geometry and shear modulus). The final selection of the bearing scheme (in terms of number of bearings and bearing dimensions at each support) is based on a costbenefit criterion aiming at optimizing structural performance at minimum cost. The methodology proposed for the preliminary design of seismically isolated overpasses and the software developed were validated through more rigorous dynamic analyses employing multi-degree of freedom numerical simulations of realistic bridge overpasses

Software for the preliminary design of seismically isolated R/C highway overpass bridges

The features of an expert system, developed for the pre-design of highway overpass R/C bridges, are presented and discussed. This system is implemented into a software and is aimed to facilitate the seismic upgrading of an overpass by isolating its deck with the inclusion of elastomeric bearings. The preliminary design of such an upgrade scheme is the target of this software based on the current design provisions of Eurocode 8 (Part 2) as well as on engineering decisions included in the expert system; it can also be extended easily to comply with alternative design provisions. The developed software is connected with a database of typically used steel laminated rubber bearings and relevant laboratory test results and it performs a series of checks according to Eurocode 8, in order to ensure the satisfactory seismic performance of the selected upgrade scheme. The parameters that are addressed within this software as independent variables are: the geometry of the overpass, the number of bearings at each deck support, the level of seismic action and the characteristics of the bearings (i.e. their geometry and shear modulus). The final selection of the bearing scheme (in terms of number of bearings and bearing dimensions at each support) is based on a costbenefit criterion aiming at optimizing structural performance at minimum cost. The methodology proposed for the preliminary design of seismically isolated overpasses and the software developed were validated through more rigorous dynamic analyses employing multi-degree of freedom numerical simulations of realistic bridge overpasses

A knowledge-based software for the preliminary design of seismically isolated bridges

Seismic design of isolated bridges involves conceptual, preliminary and detailed structural design. However, despite the variety of commercial software currently available for the analysis and design of such systems, conceptual and preliminary design can prove to be a non-straightforward procedure because of the sensitivity of bridge response on the initial decisions made by the designer of the location, number and characteristics of the bearings placed, as well as on a series of broader criteria such as serviceability, target performance level and cost-effectiveness of the various design alternatives. Given the lack of detailed design guidelines to ensure, at this preliminary stage, compliance with the above requirements, a "trial and error" procedure is typically followed in the design office to decide on the most appropriate design scheme in the number and location of the bearing systems; the latter typically based on engineering judgment to balance performance with cost. To this end, the particular research effort aims to develop a decision-making system for the optimal preliminary design of seismically isolated bridges, assumed to respond as single degree of freedom (SDOF) systems. The proposed decision-making process is based on the current design provisions of Eurocode 8, but is complemented by additional criteria set according to expert judgment, laboratory testing and recent research findings, while using a combined cost/performance criterion to select from a database of bearings available on the international market. Software is also developed for the implementation of the system. The paper concludes with the application, and essentially the validation of the methodology and software developed through more rigorous MDOF numerical analysis for the case of a real bridge. © Springer Science+Business Media B.V. 2011