484 research outputs found
PANORAMA IMAGE SETS FOR TERRESTRIAL PHOTOGRAMMETRIC SURVEYS
High resolution 3D models produced from photographs acquired with consumer-grade cameras are becoming increasingly common in the fields of geosciences. However, the quality of an image-based 3D model depends on the planning of the photogrammetric surveys. This means that the geometric configuration of the multi-view camera network and the control data have to be designed in accordance with the required accuracy, resolution and completeness. From a practical application point of view, a proper planning (of both photos and control data) of the photogrammetric survey especially for terrestrial acquisition, is not always ensured due to limited accessibility of the target object and the presence of occlusions. To solve these problems, we propose a different image acquisition strategy and we test different geo-referencing scenarios to deal with the practical issues of a terrestrial photogrammetric survey. The proposed photogrammetric survey procedure is based on the acquisition of a sequence of images in panorama mode by rotating the camera on a standard tripod. The offset of the pivot point from the projection center prevents the stitching of these images into a panorama. We demonstrate how to still take advantage of this capturing mode. The geo-referencing investigation consists of testing the use of directly observed coordinates of the camera positions, different ground control point (GCP) configurations, and GCPs with different accuracies, i.e. artificial targets vs. natural features. Images of the test field in a low-slope hill were acquired from the ground using an SLR camera. To validate the photogrammetric results a terrestrial laser scanner survey is used as benchmark
The phenolic composition of red grapes and wines as influenced by Oidium tuckeri development
Research Not
EP-1171: Testing the feasibility of integration of an in vivo dosimetry procedure in quality assurance of pelvic 3DCRT
Use of WWI photos for quantitative reconstructions of glaciers along the Italian-Austrian front
Making internal fixation work with limited bone stock
Fractures are common in small animal practice and there are many options for managing them. Plates and screws remain a popular means to manage many fractures; however, some fractures are sufficiently close to a joint (juxta-articular), that they limit the amount of bone available to achieve a standard stable plate and screw fixation. This article discusses the options to achieve a stable internal fixation when there is limited bone stock
New cost-effective technologies applied to the study of the glacier melting influence on physical and biological processes in Kongsfjorden area (Svalbard)
The Arctic region is greatly affected by climate change, with evident alterations in both physical and biological processes: temperatures are changing at a rate that is twice the global average and phytoplankton productivity is directly affected by ice melting. Continuous monitoring of this ecosystem is fundamental to gain greater understanding of the impact of changes on the natural environment, but the Global Ocean Observing System only provides partial coverage in these extreme areas, which are particularly difficult to reach. Technological progress in oceanographic measurement capabilities is indispensable for the implementation of marine observatories, especially in these remote regions. In recent years, autonomous systems and cost-effective technologies have proved to be valuable for increasing spatial and temporal coverage of data. This is the case with the innovative ArLoC (Arctic Low-Cost) probe, which was designed and developed for easy integration into various types of platforms, enabling continuous measurement of temperature, pressure and fluorescence of chlorophyll a. This work reports on the results of two scientific campaigns carried out in Kongsfjorden (Svalbard Islands) in 2018 in the framework of the UVASS (Unmanned Vehicles for Autonomous Sensing and Sampling) research project. The ArLoC probe was integrated onboard the PROTEUS (Portable RObotic TEchnology for Unmanned Surveys) unmanned semi-submersible vehicle and this allowed us to collect important data in the stretches of sea near tidewater glacier fronts. The acquired data showed several significant effects of glacier melting such as: high temperature and salinity gradients, which cause considerable variations in water mass stratification, and an increase in turbidity and the chlorophyll a concentration, which directly affects primary productivity and the trophic chain. During the surveys, ArLoC proved to be an easy-to-integrate, very reliable instrument, which permitted high spatial resolution investigation of ecological processes during glacier melting as never studied before
Calibration of Elekta aSi EPIDs used as transit dosimeter.
The transit in vivo dosimetry performed by the Electronic Portal Imaging Device (EPID), avoids the problem of solid-state detector positioning on the patient. Moreover, the dosimetric characterization of the recent Elekta aSi EPIDs in terms of signal stability and linearity enables these detectors adaptable for the transit in vivo dosimetry with 6, 10 and 15 MV photon beams. However, the implementation of the EPID transit dosimetry requires several measurements. Recently, the present authors have developed an in vivo dosimetry method for the 3D CRT based on correlation functions defined by the ratios between the transit signal, st (w,L), by the EPID and the phantom mid-plane dose, Dm(w,L), at the Source to Axis Distance (SAD) as a function of the phantom thickness, w, and the square field dimensions, L. When the phantom mid-plane was positioned at distance d from the SAD, the ratios st(w,L)/s't(d,w,L), were used to take into account the variation of the scattered photon contributions on the EPID as a function of, d and L. The aim of this paper was the implementation of a procedure that uses generalized correlation functions obtained by nine Elekta Precise linac beams. The procedure can be used by other Elekta Precise linacs equipped with the same aSi EPIDs assuring the stabilities of the beam output factors and the EPID signals. The calibration procedure of the aSi EPID here reported avoids measurements in solid water equivalent phantoms needed to implement the in vivo dosimetry method in the radiotherapy center. A tolerance level ranging between ±5% and ±6% (depending on the type of tumor) was estimated for the comparison between the reconstructed isocenter dose, Diso and the computed dose Diso, TPS by the treatment planning system (TPS)
Recommended from our members
Evidence of Recent Active Volcanism in the Balleny Islands (Antarctica) From Ice Core Records
Abstract: Volcanism can play a key role in modulating climate; however, a lack of historical records has limited our comprehension of Antarctic volcanism and its role on the cryosphere. Remote sensing can provide insight into active volcanism in Antarctica during the satellite era, although the evidence is often inconclusive. Here, we use independent evidence from ice cores to validate one such potential volcanic eruption from the subâAntarctic Balleny Islands in 2001 CE. Multiple ice cores from downwind of the eruption site, record elevated input of sulfate, microparticles, and the presence of tephra, coincident with the eruption. Inâphase deposition of volcanic products confirmed a rapid tropospheric transport of volcanic emissions from a smallâtoâmoderate, local eruption during 2001. Air mass trajectories demonstrated some air parcels were transported over the West Antarctic ice sheet from the Balleny Islands to ice core sites at the time of the potential eruption, establishing a route for transport and deposition of volcanic products over the ice sheet. The data presented here validate previous remote sensing observations and confirms a volcanic event in the Balleny Islands during 2001 CE. This newly identified eruption provides a case study of recent Antarctic volcanism
Epid-based in\ua0vivo dose verification for lung stereotactic treatments delivered with multiple breath-hold segmented volumetric modulated arc therapy
We evaluated an EPID-based in-vivo dosimetry (IVD) method for the dose verification and the treatment reproducibility of lung SBRT-VMAT treatments in clinical routine. Ten patients with lung metastases treated with Elekta VMAT technique were enrolled. All patients were irradiated in five consecutive fractions, with total doses of 50 Gy. Set-up was carried out with the Elekta stereotactic body frame. Eight patients were simulated and treated using the Active Breath Control (ABC) system, a spirometer enabling patients to maintain a breath-hold at a predetermined lung volume. Two patients were simulated and treated in free-breathing using an abdominal compressor. IVD was performed using the SOFTDISO software. IVD tests were evaluated by means of (a) ratio R between daily in-vivo isocenter dose and planned dose and (b) gamma-analysis between EPID integral portal images in terms of percentage of points with gamma-value smaller than one (gamma(%)) and mean gamma-values (gamma(mean)) using a 3%(global)/3 mm criteria. Alert criteria of +/- 5% for R ratio, gamma(%) < 90%, and gamma(mean) > 0.67 were chosen. 50 transit EPID images were acquired. For the patients treated with ABC spirometer, the results reported a high level of accuracy in dose delivery with 100% of tests within +/- 5%. The gamma-analysis showed a mean value of gamma(mean) equal to 0.21 (range: 0.04-0.56) and a mean gamma(%) equal to 96.9 (range: 78-100). Relevant discrepancies were observed only for the two patients treated without ABC, mainly due to a blurring dose effect due to residual respiratory motion. Our method provided a fast and accurate procedure in clinical routine for verifying delivered dose as well as for detecting errors
Three different glacier surges at a spot: What satellites observe and what not
In the Karakoram, dozens of glacier surges occurred in the past 2 decades, making the region a global hotspot. Detailed analyses of dense time series from optical and radar satellite images revealed a wide range of surge behaviour in this region: from slow advances longer than a decade at low flow velocities to short, pulse-like advances over 1 or 2 years with high velocities. In this study, we present an analysis of three currently surging glaciers in the central Karakoram: North and South Chongtar Glaciers and an unnamed glacier referred to as NN9. All three glaciers flow towards the same small region but differ strongly in surge behaviour. A full suite of satellites (e.g. Landsat, Sentinel-1 and 2, Planet, TerraSAR-X, ICESat-2) and digital elevation models (DEMs) from different sources (e.g. Shuttle Radar Topography Mission, SRTM; Satellite Pour l'Observation de la Terre, SPOT; High Mountain Asia DEM, HMA DEM) are used to (a) obtain comprehensive information about the evolution of the surges from 2000 to 2021 and (b) to compare and evaluate capabilities and limitations of the different satellite sensors for monitoring surges of relatively small glaciers in steep terrain. A strongly contrasting evolution of advance rates and flow velocities is found, though the elevation change pattern is more similar. For example, South Chongtar Glacier had short-lived advance rates above 10 yr-1, velocities up to 30 d-1, and surface elevations increasing by 170 m. In contrast, the neighbouring and 3-times-smaller North Chongtar Glacier had a slow and near-linear increase in advance rates (up to 500 yr-1), flow velocities below 1 d-1 and elevation increases up to 100 m. The even smaller glacier NN9 changed from a slow advance to a full surge within a year, reaching advance rates higher than 1 yr-1. It seems that, despite a similar climatic setting, different surge mechanisms are at play, and a transition from one mechanism to another can occur during a single surge. The sensor inter-comparison revealed a high agreement across sensors for deriving flow velocities, but limitations are found on small and narrow glaciers in steep terrain, in particular for Sentinel-1. All investigated DEMs have the required accuracy to clearly show the volume changes during the surges, and elevations from ICESat-2 ATL03 data fit neatly to the other DEMs. We conclude that the available satellite data allow for a comprehensive observation of glacier surges from space when combining different sensors to determine the temporal evolution of length, elevation and velocity changes
- âŠ