Kinesiological study of the push-up motion in spinal cord injury patients: involving measurement of hand pressure applied to a force plate.

We studied the pressure exerted by hands during push-ups in 21 paraplegic and 2 tetraplegic patients employing 4 different hand positions. In the fingers-spread position, the initial force exerted was a vertical force (Fz), followed by a medio-lateral force (Fy) and then an antero-posterior force (Fx). In the other 3 positions, the order of force type exertion was Fz, Fx, and then Fy. All subjects with neurological injury levels above T4 and subjects between T5 and T10 without spinal instrumentation could not push themselves up in the fingers-spread position. The fact that Fy is initiated before Fx in the fingers-spread position indicates that lateral balancing of the trunk is critical in this position, thus explaining why subjects without spinal instrumentation with neurological injury at a level higher than T10 could not control their spinal columns while performing push-ups. In contrast, antero-posterior balancing takes priority in the other hand positions. We believe that spinal instrumentation helps balance the trunk in the lateral direction, converting the thoracic spine into a rigid body in subjects with neurological injury at levels above T10. </p

Finding the optimal setting of inflated air pressure for a multi-cell air cushion for wheelchair patients with spinal cord injury.

Pressure distribution patterns of the seating interface on the multi-cell air cushion (ROHO High Profile) of 36 adults with spinal cord injury (SCI) (Neurological level Th3 -L1) were measured at different air pressure levels by a pressure mat measurement system. Stress distribution relative to the inflated air pressure in the air cushion on the patients' wheelchairs was analyzed to determine the appropriate inflated air pressure of the cushion for patients. The maximum pressure points in all subjects were at the areas of the ischial tuberosities (82 to 347 mmHg). The optimal reduction in interface pressure at the ischial tuberosities was obtained just before bottoming out. The cushion air pressure at that point was between 17 and 42 mmHg, and correlated well to body weight (r = 0.495, P = 0.0021). In contrast, the maximum pressure levels did not correlate to body weight or the Body Mass Index (BMI). Pressure at the ischial area could be reduced, but not eliminated, by adjusting the air pressure. The maximum pressure levels seemed to be related to the shape of the buttocks, especially the amount of soft tissue, and exceeded the defined threshold for pressure ulcers (&#62; 80 g/cm2).</p

Radiolytically-induced novel materials and their application to waste processing

In the present NEER project we investigated two different types of gel materials with respect to potential applications in environmental remediation, including mixed waste generated from the nuclear fuel cycles. The materials under study were: (1) silica-polymer based aerogel composites into which specific metallic cations diffuse into and remain, and (2) polymer gels made of thermo-sensitive polymer networks, whose functional groups can be ''tailored'' to have a preferred affinity for specific cations, again diffusing into and remaining in the network under a volumetrically, contractive phase-transition. The molecular, diffusion of specific cations, including those of concern in low-level waste streams, into the gel materials studied here indicates that a scaled, engineered system can be designed so that it is passive; that is, minimal (human) intervention and risk would be involved in encapsulating LLW species. In addition, the gel materials hold potential significance in environmental remediation of and recovery of metallic cations identified in respective domains and physico-chemical processes. In brief, silica gels start as aqueous/liquid solutions of base catalyzed silica hydrogels and metal ions (targeted species), such as silver. The metal ions are reduced radiolytically and migrate through the solution to form clusters. Upon post-irradiation processing, aerogel monoliths, extremely lightweight but mechanically strong, that encapsulate the metals are produced. Interestingly the radiolytic or photonic source can be gamma-rays and/or other rays from ''artificial sources'', such as reactors, or ''inherent sources'' like those characterizing mixed waste. Polymer gels, in contrast exhibit thermally-induced volumetric contraction at 20-50 C by expelling water from the gels physical state. Further, some functional groups that capture di- or tri-valent cations from aqueous solutions can be incorporated into the polymer networks on synthesis, including by radiolytic means. These polymer gels retain cations after volumetric contraction and have the ability to trap solid particulates in liquid waste streams. With both silica and polymer gels, functional design of a prototypic ''recovery'' systems, such as by natural convection in a rectangular cell, appears possible. Additional and specific details are provided in the rest of this Final Report

CASE STUDY ON ATTITUDE AND BEHAVIOR OF SCHOOL LUNCH OFFICIALS REGARDING UTILIZATION OF LOCAL PRODUCE -FOCUSING ON THE DIFFERENCE OF OCCUPATION

This study was conducted in January 2010 to identify influential factors for utilization of local produce in school lunch services and factor-correlations in terms of employment types and item types and to review the evaluation index for shokuiku. The research participants were 56 nutrition teachers, 91 school principals, and 23 school lunch directors. The study revealed that school lunch staff had high awareness and behavioral motivation for using local ingredients. School lunch directors were concerned about managerial aspects such as “high price” and “not enough variety and quantity” for making lunches with local ingredients only.&nbsp; The principals expressed high opinion on educational or administrative advantages of using local ingredients in “increased number of local cuisine in the menu” and “securing food safety” but showed low awareness on problems related to using local produce to cook for entire student body such as “longer cooking time” and “not enough providers.” Correlation between questionnaire items revealed that there was a strong positive relation between items emphasizing advantages of using local produce. The results showed that using local produce for providing school lunches could induce changes in behaviors, such as frequenting local produce markets, and it is considered to become a good evaluation index for developing shokuiku

Divergent and Scalable Synthesis of α-Hydroxy/Keto-β-amino Acid Analogues by the Catalytic Enantioselective Addition of Glyoxylate Cyanohydrin to Imines

The catalytic enantioselective addition of glyoxylate cyanohydrin to imines to afford α-keto-β-amino acid equivalents is reported. Sterically tuned aminobenzothiadiazine catalysts provided high yields and stereoselectivities (up to 100% yield, 99% ee, >99:1 dr) for both aromatic and aliphatic imines, and the stereodivergent synthesis of both diastereomers was achieved. The optimal catalytic system was scalable, even with a low catalyst loading. The resulting adducts were converted into various chiral building blocks, including β-amino acid analogues, which are important motifs in medicinal chemistry, while maintaining a high enantiomeric excess

Prominent role of RAB39A-RXRB axis in cancer development and stemness

In this study, we found that RAB39A, a member of the RAS oncogene family, was selectively expressed in cancer cells of different histotypes, by analyzing gene expression in human osteosarcoma cells and the cancer stem cells (CSCs) and by comparing them with normal cells through global transcriptomics and principal component analyses. We further validated RAB39A as a therapeutic target, by silencing its expression. The silencing impaired cancer stemness and spherogenic ability in vitro, as well as tumorigenesis in vivo. RNA-seq analyses in the silenced spheres suggested that RAB39A is associated downstream with RXRB and KLF4. Notably, RXRB expression was inhibited in RAB39A-silenced CSCs. Induced overexpression of RXRB in RAB39A-silenced cells restored spherogenic ability and tumorigenesis, confirming RXRB as a major effector of RAB39A. Quantitative RT-PCR analysis of 3c400 human cancer tissues showed that RAB39A was highly expressed in sarcomas and in malignancies of lymphoid, adrenal and testicular tissues. Our data provide the rationale for targeting of the RAB39A-RXRB axis as a therapy for aggressive cancers

Proton Spin-Lattice Relaxation of Water Molecules in Ferrous-Ferric/Agarose Gel System

Proton spin-lattice relaxation time (T1) of water in aqueous solutions of ferrous and ferric ions and in the corresponding agarose gel systems have been studied in the light of NMR relaxation theory. The theoretical analysis of 1/T1\u27s has revealed that, at the microscopic level, changes in the solvation states of paramagnetic ions in aqueous or gel environment are greater than difference in the paramagnetism between ferric and ferrous ions. The former change is the primary factor for the exhibition of radiation effect. At the phenomenological level, we have confirmed and demonstrated that: (1) Radiation effect is almost exclusively exhibited through changes in 1/T1 caused by the interactions between water proton and ferrous or ferric ions; and (2) fraction of conversion of ferrous to ferric ions induced by radiation is the “true” representation of the spatial distribution of radiation dose

Evaluation of wheelchair cushions by means of pressure distribution mapping.

We studied the seated buttock pressure distribution in six paraplegic patients by means of computerized pressure mapping. They were all male and their age ranged from 18 to 48 years old. Their level of paralysis varied from Th5 to L1. Five kinds of wheelchair cushions were studied: an air cushion, a contour cushion, a polyurethane foam cushion, a Cubicushion (which is made of polyurethane foams) and a silicone gel cushion. A tactile sensor consisting of 2064 matrices was used for measuring the buttock pressure distribution and the data was analyzed on a personal computer. Peak pressures measured for each cushion were as follows (in descending order): the Cubicushion, the polyurethane foam cushion, the contour cushion, the silicone gel cushion, and the air cushion. The areas of total contact measured for each cushion were as follows (in descending order): the air cushion, the silicone gel cushion, the polyurethane foam cushion, the contour cushion and the Cubicushion. Based on these findings, we conclude that the most advantageous cushion is the air cushion or the silicone gel cushion. Likewise, we conclude that the Cubicushion is not practical for pressure sore prevention.</p

Bimetallic Pt-Ag and Pd-Ag Nanoparticles

We report studies of bimetallic nanoparticles with 15%-16% atomic crystal parameters size mismatch. The degree of alloying was probed in a 2-nm Pt core (smallest attainable core size) of Pt-Ag nanoparticles (completely immiscible in bulk) and 20-nm-diameter Pd-Ag nanowires (completely miscible in bulk). Particles were synthesized radiolytically, and depending on the initial parameters, they assume spherical or cylindrical (nanowire) morphologies. In all cases, the metals are seen to follow their bulk alloying characteristics. Pt and Ag segregate in both spherical and wire forms, which indicates that strain due to crystallographic mismatch overcomes the excess surface free energy in the small particles. The Pd-Ag nanowires alloy similar to previously reported spherical Pd-Ag particles of similar diameter and composition