128 research outputs found

    Charge Localization in Defective BiVO4

    Get PDF
    We study the native defects in bismuth vanadate using hybrid density functional theory. We pay special attention to where excess charges localize by considering different polaronic distortions and find that charge localization has a profound effect on the local chemical environment around certain defects. In particular, oxygen dimerization may occur in the presence of acceptor defects. On the basis of Fermi level pinning due to compensation between donors and acceptors we additionally find that intrinsic p-type conductivity is difficult to achieve in BiVO4, in good agreement with experimental observations. Our results give new insights into the defect chemistry of bismuth vanadate and act as a guide for future studies on defects in complex metal oxides

    Surface plasmon resonance assay for label-free and selective detection of hiv-1 p24 protein

    Get PDF
    The early detection of the human immunodeficiency virus (HIV) is of paramount importance to achieve efficient therapeutic treatment and limit the disease spreading. In this perspective, the assessment of biosensing assay for the HIV-1 p24 capsid protein plays a pivotal role in the timely and selective detection of HIV infections. In this study, multi-parameter-SPR has been used to develop a reliable and label-free detection method for HIV-1 p24 protein. Remarkably, both physical and chemical immobilization of mouse monoclonal antibodies against HIV-1 p24 on the SPR gold detecting surface have been characterized for the first time. The two immobilization techniques returned a capturing antibody surface coverage as high as (7.5 ± 0.3) × 1011 molecule/cm2 and (2.4 ± 0.6) × 1011 molecule/cm2, respectively. However, the covalent binding of the capturing antibodies through a mixed self-assembled monolayer (SAM) of alkanethiols led to a doubling of the p24 binding signal. Moreover, from the modeling of the dose-response curve, an equilibrium dissociation constant KD of 5.30 × 10−9 M was computed for the assay performed on the SAM modified surface compared to a much larger KD of 7.46 × 10−5 M extracted for the physisorbed antibodies. The chemically modified system was also characterized in terms of sensitivity and selectivity, reaching a limit of detection of (4.1 ± 0.5) nM and an unprecedented selectivity ratio of 0.02

    Direct Quantification of Quasi-Fermi-Level Splitting in Organic Semiconductor Devices

    Get PDF
    Non-radiative losses to the open-circuit voltage are a primary factor in limiting the power conversion efficiency of organic photovoltaic devices. The dominant non-radiative loss is intrinsic to the active layer and can be determined from the quasi-Fermi level splitting (QFLS) and the radiative thermodynamic limit of the photovoltage. Quantification of the QFLS in thin film devices with low mobility is challenging due to the excitonic nature of photoexcitation and additional sources of nonradiative loss associated with the device structure. This work outlines an experimental approach based on electro-modulated photoluminescence, which can be used to directly measure the intrinsic non-radiative loss to the open-circuit voltage; thereby, quantifying the QFLS. Drift-diffusion simulations are carried out to show that this method accurately predicts the QFLS in the bulk of the device regardless of device-related non-radiative losses. State-of-the-art PM6:Y6-based organic solar cells are used as a model to test the experimental approach, and the QFLS is quantified and shown to be independent of device architecture. This work provides a method to quantify the QFLS of organic solar cells under operational conditions, fully characterizing the different contributions to the non-radiative losses of the open-circuit voltage. The reported method will be useful in not only characterizing and understanding losses in organic solar cells, but also other device platforms such as light-emitting diodes and photodetectors

    Doping-induced carrier profiles in organic semiconductors determined from capacitive extraction-current transients

    Get PDF
    A method to determine the doping induced charge carrier profiles in lightly and moderately doped organic semiconductor thin films is presented. The theory of the method of Charge Extraction by a Linearly Increasing Voltage technique in the doping-induced capacitive regime (doping-CELIV) is extended to the case with non-uniform doping profiles and the analytical description is verified with drift-diffusion simulations. The method is demonstrated experimentally on evaporated organic small- molecule thin films with a controlled doping profile, and solution-processed thin films where the non- uniform doping profile is unintentional, probably induced during the deposition process, and a priori unknown. Furthermore, the method offers a possibility of directly probing charge-density distributions at interfaces between highly doped and lightly doped or undoped layers

    Charge photogeneration in few-layer MoS2

    Full text link
    The two-dimensional semiconductor MoS2 in its mono- and few-layer form is expected to have a significant exciton binding energy of several 100 meV, leading to the consensus that excitons are the primary photoexcited species. Nevertheless, even single layers show a strong photovoltaic effect and work as the active material in high sensitivity photodetectors, thus indicating efficient charge carrier photogeneration (CPG). Here we use continuous wave photomodulation spectroscopy to identify the optical signature of long-lived charge carriers and femtosecond pump-probe spectroscopy to follow the CPG dynamics. We find that intitial photoexcitation yields a branching between excitons and charge carriers, followed by excitation energy dependent hot exciton dissociation as an additional CPG mechanism. Based on these findings, we make simple suggestions for the design of more efficient MoS2 photovoltaic and photodetector devices

    Ultrafast Dynamics of Localized and Delocalized Polaron Transitions in P3HT/PCBM Blend Materials: The Effects of PCBM Concentration

    Get PDF
    Nowadays, organic solar cells have the interest of engineers for manufacturing flexible and low cost devices. The considerable progress of this nanotechnology area presents the possibility of investigating new effects from a fundamental science point of view. In this letter we highlight the influence of the concentration of fullerene molecules on the ultrafast transport properties of charged electrons and polarons in P3HT/PCBM blended materials which are crucial for the development of organic solar cells. Especially, we report on the femtosecond dynamics of localized (P2at 1.45 eV) and delocalized (DP2at 1.76 eV) polaron states of P3HT matrix with the addition of fullerene molecules as well as the free-electron relaxation dynamics of PCBM-related states. Our study shows that as PCBM concentration increases, the amplified exciton dissociation at bulk heterojunctions leads to increased polaron lifetimes. However, the increase in PCBM concentration can be directly related to the localization of polarons, creating thus two competing trends within the material. Our methodology shows that the effect of changes in structure and/or composition can be monitored at the fundamental level toward optimization of device efficiency

    A large-area organic transistor with 3D-printed sensing gate for noninvasive single-molecule detection of pancreatic mucinous cyst markers

    Get PDF
    Early diagnosis in a premalignant (or pre-invasive) state represents the only chance for cure in neoplastic diseases such as pancreatic-biliary cancer, which are otherwise detected at later stages and can only be treated using palliative approaches, with no hope for a cure. Screening methods for the purpose of secondary prevention are not yet available for these cancers. Current diagnostic methods mostly rely on imaging techniques and conventional cytopathology, but they do not display adequate sensitivity to allow valid early diagnosis. Next-generation sequencing can be used to detect DNA markers down to the physical limit; however, this assay requires labeling and is time-consuming. The additional determination of a protein marker that is a predictor of aggressive behavior is a promising innovative approach, which holds the potential to improve diagnostic accuracy. Moreover, the possibility to detect biomarkers in blood serum offers the advantage of a noninvasive diagnosis. In this study, both the DNA and protein markers of pancreatic mucinous cysts were analyzed in human blood serum down to the single-molecule limit using the SiMoT (single-molecule assay with a large transistor) platform. The SiMoT device proposed herein, which exploits an inkjet-printed organic semiconductor on plastic foil, comprises an innovative 3D-printed sensing gate module, consisting of a truncated cone that protrudes from a plastic substrate and is compatible with standard ELISA wells. This 3D gate concept adds tremendous control over the biosensing system stability, along with minimal consumption of the capturing molecules and body fluid samples. The 3D sensing gate modules were extensively characterized from both a material and electrical perspective, successfully proving their suitability as detection interfaces for biosensing applications. KRAS and MUC1 target molecules were successfully analyzed in diluted human blood serum with the 3D sensing gate functionalized with b-KRAS and anti-MUC1, achieving a limit of detection of 10 zM and 40 zM, respectively. These limits of detection correspond to (1 ± 1) KRAS and (2 ± 1) MUC1 molecules in the 100 μL serum sample volume. This study provides a promising application of the 3D SiMoT platform, potentially facilitating the timely, noninvasive, and reliable identification of pancreatic cancer precursor cysts

    Electron correlation effects in electron-hole recombination in organic light-emitting diodes

    Get PDF
    We develop a general theory of electron--hole recombination in organic light emitting diodes that leads to formation of emissive singlet excitons and nonemissive triplet excitons. We briefly review other existing theories and show how our approach is substantively different from these theories. Using an exact time-dependent approach to the interchain/intermolecular charge-transfer within a long-range interacting model we find that, (i) the relative yield of the singlet exciton in polymers is considerably larger than the 25% predicted from statistical considerations, (ii) the singlet exciton yield increases with chain length in oligomers, and, (iii) in small molecules containing nitrogen heteroatoms, the relative yield of the singlet exciton is considerably smaller and may be even close to 25%. The above results are independent of whether or not the bond-charge repulsion, X_perp, is included in the interchain part of the Hamiltonian for the two-chain system. The larger (smaller) yield of the singlet (triplet) exciton in carbon-based long-chain polymers is a consequence of both its ionic (covalent) nature and smaller (larger) binding energy. In nitrogen containing monomers, wavefunctions are closer to the noninteracting limit, and this decreases (increases) the relative yield of the singlet (triplet) exciton. Our results are in qualitative agreement with electroluminescence experiments involving both molecular and polymeric light emitters. The time-dependent approach developed here for describing intermolecular charge-transfer processes is completely general and may be applied to many other such processes.Comment: 19 pages, 11 figure
    corecore