High temperature dewatering of ethanol by vapour permeation and pervaporation with HybSi® membranes

Ethanol is one of the most important commodity chemicals used in a broad range of applications and can be produced by the hydrolysis of ethylene, though by far the largest fraction of ethanol is produced via fermentation mainly using 1st generation feedstock. Regardless of the source of the ethanol, from fermentation or from direct hydration of ethylene, the product is normally a dilute aqueous solution. The product is fed to a distillation system to concentrate ethanol. The separation of ethanol and water is complicated because ethanol and water form an azeotrope at 95.6 weight% ethanol. It is not possible to produce pure ethanol from an azeotropic mixture by normal distillation. Pervaporation is a method for dehydration of organics such as ethanol, which substantially avoids drawbacks of azeotropic distillation and adsorption. As the pervaporation process is not governed by thermodynamic equilibria and the selectivity is determined by the difference in permeation rates of components through the membrane, mixtures of components with close boiling points and azeotropic mixtures can be effectively separated. Pervaporation exhibits its highest efficiency in a concentration range of the ethanol-water mixture where distillation is least effective, namely, at high ethanol concentrations of 90-95 wt.%, especially in the vicinity of the azeotropic concentration. Previous studies have shown that hybrid distillation processes combined with either pervaporation or vapour permeation can be very attractive for the separation of liquid mixtures. Such a hybrid process leads to large energy savings when the membrane is used for breaking the azeotrope. At the preferred process conditions currently available commercial polymer and zeolite membranes cannot be used. In this study, the focus is on membrane stability at higher operating temperatures in a water ethanol mixture for sol–gel derived Hybsi® membranes and the membrane performance in pervaporation and vapour permeation. The stability of the membranes is one of the crucial factors of their application in industrial separation processes. A comparison between pervaporation and vapour permeation has been made in which water removal from ethanol has been used as an example. By applying higher temperatures and thus higher driving forces in the membrane unit the required membrane area and the total costs of the process are strongly reduced. The comparison was based on endurance tests, in the dehydration of ethanol at 150°C. The high hydrothermal and chemical stability of the membrane was proven in continuous measurements (24/7) that lasted for periods of over 500 days. The membrane performance was followed during this period of time by measuring the flux and membrane selectivity. Both in pervaporation and vapour permeation a good and stable membrane performance was obtained after a stabilisation period and from a flux and selectivity point of view at 150°C both membrane operation options show similar results. Detailed test results will be presented. For ethanol dehydration vapour permeation would be preferred above pervaporation as advantage can be taken of the vapour already present at the top of the distillation column which will still be used to remove major part of the water present. The presented results show that HybSi® membranes are applicable in the dehydration of ethanol by pervaporation and vapour permeation at higher temperatures. The high temperature use leads to a broadened application window and will open up markets that have so far been inaccessible for commercially available pervaporation and vapour permeation membranes

Disparities in kidney transplantation accessibility among immigrant populations in Europe: A systematic review and meta-analysis

Background and objectives: Disparities in access to healthcare for patients with an immigration background are well-known. The aim of this study was to determine whether disparities among immigrant populations translate into a relative difference in the number of kidney transplants (KT) performed in documented immigrant patients (first and second generation) relative to native-born patients in Europe. Methods: A literature search was performed in PubMed from inception to 11-10-2022. Studies were eligible if: (1) written in English, (2) included immigrant and native-born KT patients, (3) performed in countries registered as Council of Europe members, (4) focused on documented first- and second-generation immigrant populations [1]. Systematic reviews, literature reviews, and case reports or articles about emigration, non-KT, and undocumented immigrants were excluded. The outcome measurement was a relative percentage of KTs to the total population per 100.000 residents. By dividing the immigrant percentages by the native-born resident percentages, the odds ratio (OR) was calculated in a meta-analysis. The risk of bias was assessed; articles with high risk of bias were excluded in a second meta-analysis. Results: Out of 109 articles, 5 were included (n = 24,614). One Italian study (n = 24,174) had a ratio below 1, being 0.910 (95%CI 0.877-0.945). The other four articles (n = 196, n = 283, n = 77, n = 119) had ratios above 1: 1.36 (95%CI 0.980-1.87), 2.04 (95%CI 1.56-2.68), 2.23 (95%CI 1.53-3.25) and 2.64 (95%CI 1.68-4.15). After performing a meta-analysis, the OR did not show a significant difference: 1.68 (95%CI 1.03-2.75). After bias correction, this remained unchanged: 1.78 (95%CI 0.961-3.31). Conclusions: In our meta-analysis we did not find a significant difference in the relative number of KTs performed in immigrant versus native-born populations in Europe. However, a lesser likelihood for immigrants to receive a pre-emptive kidney transplantation was found. Large heterogeneity between studies (e.g. different sample size, patient origins, study duration, adult vs children patients) was a shortcoming to our analysis. Nevertheless, our article is the first review in this understudied topic. As important questions (e.g. on ethnicity, living donor rate) remain, future studies are needed to address them

Comparing modeling strategies combining changes in multiple serum tumor biomarkers for early prediction of immunotherapy non-response in non-small cell lung cancer

BACKGROUND: Patients treated with immune checkpoint inhibitors (ICI) are at risk of adverse events (AEs) even though not all patients will benefit. Serum tumor markers (STMs) are known to reflect tumor activity and might therefore be useful to predict response, guide treatment decisions and thereby prevent AEs.OBJECTIVE: This study aims to compare a range of prediction methods to predict non-response using multiple sequentially measured STMs.METHODS: Nine prediction models were compared to predict treatment non-response at 6-months (n = 412) using bi-weekly CYFRA, CEA, CA-125, NSE, and SCC measurements determined in the first 6-weeks of therapy. All methods were applied to six different biomarker combinations including two to five STMs. Model performance was assessed based on sensitivity, while model training aimed at 95% specificity to ensure a low false-positive rate.RESULTS: In the validation cohort, boosting provided the highest sensitivity at a fixed specificity across most STM combinations (12.9% -59.4%). Boosting applied to CYFRA and CEA achieved the highest sensitivity on the validation data while maintaining a specificity &gt;95%.CONCLUSIONS: Non-response in NSCLC patients treated with ICIs can be predicted with a specificity &gt;95% by combining multiple sequentially measured STMs in a prediction model. Clinical use is subject to further external validation.</p

Transcriptome Analysis in Peripheral Blood of Humans Exposed to Environmental Carcinogens: A Promising New Biomarker in Environmental Health Studies

BACKGROUND: Human carcinogenesis is known to be initiated and/or promoted by exposure to chemicals that occur in the environment. Molecular cancer epidemiology is used to identify human environmental cancer risks by applying a range of effect biomarkers, which tend to be nonspecific and do not generate insights into underlying modes of action. Toxicogenomic technologies may improve on this by providing the opportunity to identify, molecular biomarkers consisting of altered gene expression profiles. OBJECTIVES: The aim of the present study, was to monitor the expression of selected genes in a random sample of adults in Flanders selected from specific regions with (presumably,) different environmental burdens. Furthermore, associations of gene expression with blood and urinary, measures of biomarkers of exposure, early, phenotypic effects, and tumor markers were investigated. RESULTS: Individual gene expression of cytochrome p450 1B1, activating transcription factor 4, mitogen-activated protein kinase K superoxide dismutase 2 (Mn), chemokine (C-X-C motif) ligand 1 (melanoma growth stimulating activity, alpha), diacylglycerol 0 acyltransferase homolog 2 (mouse), tigger transposable element derived 3, and PTEN-induced putative kinasel were measured by means of quantitative polymerase chain reaction in peripheral blood cells of 398 individuals. After correction for the confounding effect of tobacco smoking, inhabitants of the Olen region showed the highest differences in gene expression levels compared with inhabitants from the Gent and fruit cultivation regions. Importantly, we observed multiple significant correlations of particular gene expressions with blood and urinary, measures of various environmental carcinogens. CONCLUSIONS: Considering the observed significant differences between gene expression levels in inhabitants of various regions in Flanders and the associations of gene expression with blood or urinary measures of environmental carcinogens, we conclude that gene expression profiling appears promising as a tool for biological monitoring in relation to environmental exposures in humans

A novel BH3 ligand that selectively targets Mcl-1 reveals that apoptosis can proceed without Mcl-1 degradation

Like Bcl-2, Mcl-1 is an important survival factor for many cancers, its expression contributing to chemoresistance and disease relapse. However, unlike other prosurvival Bcl-2–like proteins, Mcl-1 stability is acutely regulated. For example, the Bcl-2 homology 3 (BH3)–only protein Noxa, which preferentially binds to Mcl-1, also targets it for proteasomal degradation. In this paper, we describe the discovery and characterization of a novel BH3-like ligand derived from Bim, BimS2A, which is highly selective for Mcl-1. Unlike Noxa, BimS2A is unable to trigger Mcl-1 degradation, yet, like Noxa, BimS2A promotes cell killing only when Bcl-xL is absent or neutralized. Furthermore, killing by endogenous Bim is not associated with Mcl-1 degradation. Thus, functional inactivation of Mcl-1 does not always require its elimination. Rather, it can be efficiently antagonized by a BH3-like ligand tightly engaging its binding groove, which is confirmed here with a structural study. Our data have important implications for the discovery of compounds that might kill cells whose survival depends on Mcl-1

Macroscopic Quantum Tunneling and Dissipation of Domain Wall in Ferromagnetic Metals

The depinning of a domain wall in ferromagentic metal via macroscopic quantum tunneling is studied based on the Hubbard model. The dynamics of the magnetization verctor is shown to be governed by an effective action of Heisenberg model with a term non-local in time that describes the dissipation due to the conduction electron. Due to the existence of the Fermi surface there exists Ohmic dissipation even at zero temperature, which is crucially different from the case of the insulator. Taking into account the effect of pinning and the external magnetic field the action is rewritten in terms of a collective coordinate, the position of the wall, $Q$. The tunneling rate for $Q$ is calculated by use of the instanton method. It is found that the reduction of the tunneling rate due to the dissipation is very large for a thin domain wall with thickness of a few times the lattice spacing, but is negligible for a thick domain wall. Dissipation due to eddy current is shown to be negligible for a wall of mesoscopic size.Comment: of pages 26, to appear in "Quantum Tunneling of Magnetization, ed. B. Barbara and L. Gunther (Kluwer Academic Pub.), Figures available by FAX (81-48-462-4649

Tunneling with dissipation and decoherence for a large spin

We present rigorous solution of problems of tunneling with dissipation and decoherence for a spin of an atom or a molecule in an isotropic solid matrix. Our approach is based upon switching to a rotating coordinate system coupled to the local crystal field. We show that the spin of a molecule can be used in a qubit only if the molecule is strongly coupled with its atomic environment. This condition is a consequence of the conservation of the total angular momentum (spin + matrix), that has been largely ignored in previous studies of spin tunneling.Comment: 4 page

Formulae for zero-temperature conductance through a region with interaction

The zero-temperature linear response conductance through an interacting mesoscopic region attached to noninteracting leads is investigated. We present a set of formulae expressing the conductance in terms of the ground-state energy or persistent currents in an auxiliary system, namely a ring threaded by a magnetic flux and containing the correlated electron region. We first derive the conductance formulae for the noninteracting case and then give arguments why the formalism is also correct in the interacting case if the ground state of a system exhibits Fermi liquid properties. We prove that in such systems, the ground-state energy is a universal function of the magnetic flux, where the conductance is the only parameter. The method is tested by comparing its predictions with exact results and results of other methods for problems such as the transport through single and double quantum dots containing interacting electrons. The comparisons show an excellent quantitative agreement.Comment: 18 pages, 18 figures; to appear in Phys. Rev.

Superfluids and Supersolids on Frustrated 2D Lattices

We study the ground state of hard-core bosons with nearest-neighbor hopping and nearest-neighbor interactions on the triangular and Kagom\'e lattices by mapping to a system of spins ($S={1\over2}$), which we analyze using spin-wave theory. We find that the both lattices display superfluid and supersolid (a coexistence of superfluid and solid) order as the parameters and filling are varied. Quantum fluctuations seem large enough in the Kagom\'e system to raise the interesting possibility of a disordered ground state.Comment: Latex format, 24 figures available by email upon request. Submitted to Physical Review

Magnetic Field Dependence of Macroscopic Quantum Tunneling and Coherence of Ferromagnetic Particle

We calculate the quantum tunneling rate of a ferromagnetic particle of $\sim 100 \AA$ diameter in a magnetic field of arbitrary angle. We consider the magnetocrystalline anisotropy with the biaxial symmetry and that with the tetragonal symmetry. Using the spin-coherent-state path integral, we obtain approximate analytic formulas of the tunneling rates in the small $\epsilon (=1- H/H_c)$-limit for the magnetic field normal to the easy axis ($\theta_H = \pi/2$), for the field opposite to the initial easy axis ($\theta_H = \pi$), and for the field at an angle between these two orientations ($\pi/2 << \theta_H << \pi$). In addition, we obtain numerically the tunneling rates for the biaxial symmetry in the full range of the angle $\theta_H$ of the magnetic field ($\pi/2 < \theta_H \leq \pi$), for the values of \epsilon =0.01 and 0.001.Comment: 25 pages of text (RevTex) and 4 figures (PostScript files), to be published in Phys. Rev.