2,975 research outputs found
An Experimental 11.5 T Nb3Sn LHC Type of Dipole Magnet
As part of the magnet development program for the LHC an experimental 1 m long 11.5 T single aperture Nb3Sn dipole magnet has been designed and is now under construction. The design is focused on full utilisation of the high current density in the powder tube Nb3Sn. A new field optimisation has led to a different winding layout and cable sizes as compared to the reference LHC design. Another important feature of the design is the implementation of a shrink fit ring collar system. An extensive study of the critical current of the Nb3Sn cables as a function of the transverse stress on the cables shows a permanent degradation by the cabling process of about 20%, still leaving a safety margin at the operation field of 11.5 T of 15%. A revised glass/mica glass insulation system is applied which improves the thermal conductivity of the windings as well as the impregnation process considerably. This paper describes various design and production details of the magnet system as well as component test
Development of an experimental 10 T Nb3Sn dipole magnet for the CERN LHC
An experimental 1-m long twill aperture dipole magnet developed using a high-current Nb3Sn conductor in order to attain a magnetic field well beyond 10 T at 4.2 K is described. The emphasis in this Nb3Sn project is on the highest possible field within the known Large Hadron Collider (LHC) twin-aperture configuration. A design target of 11.5 T was chosen
Test Results of a 1.2 kg/s Centrifugal Liquid Helium Pump for the ATLAS Superconducting Toroid Magnet System
The toroid superconducting magnet of ATLAS-LHC experiment at CERN will be indirectly cooled by means of forced flow of liquid helium at about 4.5 K. A centrifugal pump will be used, providing a mass flow of 1.2 kg/s and a differential pressure of 40 kPa (ca. 400 mbar) at about 4300 rpm. Two pumps are foreseen, one for redundancy, in order to feed in parallel the cooling circuits of the Barrel and the two End-Caps toroid magnets. The paper describes the tests carried out at CERN to measure the characteristic curves, i.e. the head versus the mass flow at different rotational speeds, as well as the pump total efficiency. The pump is of the "fullemission" type, i.e. with curved blades and it is equipped with an exchangeable inducer. A dedicated pump test facility has been constructed at CERN, which includes a Coriolis-type liquid helium mass flow meter. This facility is connected to the helium refrigerator used for the tests at CERN of the racetrack magnets of the Barrel and of the End-Cap toroids
A general scaling relation for the critical current density in Nb3Sn
We review the scaling relations for the critical current density (Jc) in
Nb3Sn wires and include recent findings on the variation of the upper critical
field (Hc2) with temperature (T) and A15 composition. We highlight deficiencies
in the Summers/Ekin relations, which are not able to account for the correct
Jc(T) dependence. Available Jc(H) results indicate that the magnetic field
dependence for all wires can be described with Kramer's flux shear model, if
non-linearities in Kramer plots are attributed to A15 inhomogeneities. The
strain (eps) dependence is introduced through a temperature and strain
dependent Hc2*(T,eps) and Ginzburg- Landau parameter kappa1(T,eps) and a strain
dependent critical temperature Tc(eps). This is more consistent than the usual
Ekin unification, which uses two separate and different dependencies on Hc2*(T)
and Hc2*(eps). Using a correct temperature dependence and accounting for the
A15 inhomogeneities leads to a remarkable simple relation for Jc(H,T,eps).
Finally, a new relation for s(eps) is proposed, based on the first, second and
third strain invariants.Comment: Accepted Topical Review for Superconductor, Science and Technolog
Theoretical and Experimental Investigation of the Ramp Losses in Conductor and Coil Casing of the ATLAS Barrel Toroid Coils
Cyclooxygenase Isoenzyme-2 and Vascular Endothelial Growth Factor are Associated with Poor Prognosis in Esophageal Adenocarcinoma
Morphometrically estimated variation in nuclear size - A useful tool in grading prostatic cancer
At present there are several grading systems for prostatic carcinoma. Most are difficult to reproduce. An objective method of grading seems to be necessary and could make comparisons between various groups of patients easier and grading more reliable. In the present study morphometrically estimated nuclear size and variation in nuclear size are matched with the survival rates of 207 patients who underwent total perineal prostatetomy for cancer. On the basis of morphometrically estimated variation in nuclear size the patients could be divided into two groups with significantly differing survival rates. In this way it was possible to split the group of patients with grade 2 carcinoma (Mostofi's grading system) into two groups of patients with significantly different survival rates. The survival rates in these two groups did not differ significantly from those in the patients with Grade 1 and Grade 3 tumors respectively. The results are discussed in the light of the recent literature on the subject. Morphometry seems to be a valuable tool in grading prostatic cancer
Cryogenic Characteristics of the ATLAS Barrel Toroid Superconducting Magnet
ATLAS, one of the experiments of the LHC accelerator under commissioning at CERN, is equipped with a large superconducting magnet the Barrel Toroid (BT) that has been tested at nominal current (20500 A). The BT is composed of eight race-track superconducting coils (each one weights about 45 tons) forming the biggest air core toroidal magnet ever built. By means of a large throughput centrifugal pump, a forced flow (about 10 liter/second at 4.5 K) provides the indirect cooling of the coils in parallel. The paper describes the results of the measurements carried out on the complete cryogenic system assembled in the ATLAS cavern situated 100 m below the ground level. The measurements include, among other ones, the static heat loads, i.e., with no or constant current in the magnet, and the dynamic ones, since additional heat losses are produced, during the current ramp-up or slow dump, by eddy currents induced on the coil casing
Precision Subsampling System for Mars Surface Missions
The ability to analyze heterogeneous rock samples at fine spatial scales would represent a powerful addition to our planetary in situ analytical toolbox. This is particularly true for Mars, where the signatures of past environments and, potentially, habitability are preserved in chemical and morphological variations across sedimentary layers and among mineral pr.ases in a given rock specimen. On Earth, microbial life often associates with surfaces at the interface of chemical nutrients, and ultimately retains sub-millimeter to millimeter-scale layer confinement in fossilization. On Mars, and possibly other bodies, trace chemical markers (elemental, organic/molecular, isotopic, chiral, etc.) and fine-scale morphological markers (e.g., micro-fossils) may he too subtle, degraded, or ambiguous to be detected, using miniaturized instrumentation, without some concentration or isolation. This is because (i) instrument sensitivity may not be high enough to detect trace markers in bulk averages; and (ii) instrument s~lectiviry may not be sufficient to distinguish such markers from interfering/counteracting signals from the bulk. Moreover from a fundamental chemostratigraphic perspective there would be a great benefit to assessing specific chemical and stable isotopic gradients, over millimeter-to-centimeter scales and beyond, with higher precision than currently possible in situ. We have developed a precision subsampling system (PSS) that addresses this need while remaining relatively flexible to a variety of instruments that may take advantage of the capability on future missions. The PSS is relevant to a number of possible lander/rover missions, especially Mars Sample Return. Our specific PSS prototype is undergoing testing under Mars ambient conditions, on a variety of natural analog rocks and rock drill cores, using a set of complementary flight-compatible measurement techniques. The system is available for testing with other contact instruments that may benefit from precision sampling
- …