Sub-10 nm colloidal lithography for integrated spin-photo-electronic devices

Colloidal lithography [1] is how patterns are reproduced in a variety of natural systems and is used more and more as an efficient fabrication tool in bio-, opto-, and nano-technology. Nanoparticles in the colloid are made to form a mask on a given material surface, which can then be transferred via etching into nano-structures of various sizes, shapes, and patterns [2,3]. Such nanostructures can be used in biology for detecting proteins [4] and DNA [5,6], for producing artificial crystals in photonics [7,8] and GHz oscillators in spin-electronics [9-14]. Scaling of colloidal patterning down to 10-nm and below, dimensions comparable or smaller than the main relaxation lengths in the relevant materials, including metals, is expected to enable a variety of new ballistic transport and photonic devices, such as spin-flip THz lasers [15]. In this work we extend the practice of colloidal lithography to producing large-area, near-ballistic-injection, sub-10 nm point-contact arrays and demonstrate their integration in to spin-photo-electronic devices.Comment: 15 pages, 5 figure

Creep-Fatigue Crack Growth in Power Plant Components

In components operating at high temperature, the presence of defect, that may derive from manufacturing process or operating under critical conditions, could raise to creep-fatigue crack growth even at low loading conditions. Creep- fatigue experimental tests have been performed on P91 material, at 600 °C according to ASTM E2760-10 standard, with focus on the effects of the initial nominal stress intensity factor range, ranging between 16 and 22 MPa m 0.5, and the hold time, ranging between 0.1 and 10 hours. The results will be presented in the paper, together with their application for residual life prediction of a power plant cracked pipe, as case study

Cooking influence on physico-chemical fruit characteristics of eggplant (Solanum melongena L.)

Physico-chemical traits of three eggplant genotypes ("Tunisina", "Buia" and "L 305") were evaluated before and after two cooking treatments (grilling and boiling). Different genotypes revealed different changes after cooking, with "Tunisina" showing a better retention of phytochemicals with respect to other two genotypes. The main physical phenomena were water loss during grilling, and dry matter loss after boiling. Chlorogenic acid, the main phenolic in eggplant, resulted higher in grilled samples, while delphinidin glycosides resulted more retained in boiled samples. Glycoalkaloids, thiols and biogenic amines were generally stable, while 5-hydroxy-methyl-furfural was found only in grilled samples. Interestingly, Folin-Ciocalteu index and free radical scavenging capacity, measured with three different assays, were generally increased after cooking, with a greater formation of antioxidant substances in grilled samples. NMR relaxation experiments clarified the hypothesis about the changes of eggplant compounds in terms of decomposition of larger molecules and production of small ones after cooking

Spin-orbit torque-driven magnetization switching and thermal effects studied in Ta\CoFeB\MgO nanowires

We demonstrate magnetization switching in out-of-plane magnetized Ta\CoFeB\MgO nanowires by current pulse injection along the nanowires, both with and without a constant and uniform magnetic field collinear to the current direction. We deduce that an effective torque arising from spin-orbit effects in the multilayer drives the switching mechanism. While the generation of a component of the magnetization along the current direction is crucial for the switching to occur, we observe that even without a longitudinal field thermally generated magnetization fluctuations can lead to switching. Analysis using a generalized Néel-Brown model enables key parameters of the thermally induced spin-orbit torques-driven switching process to be estimated, such as the attempt frequency and the effective energy barrier

Application of martensitic SMA alloys as passive dampers of GFRP laminated composites

This paper describes the application of SMA (Shape Memory Alloy) materials to enhance thepassive damping of GFRP (Glass Fiber Reinforced Plastic) laminated composite. The SMA has been embeddedas reinforcement in the GFRP laminated composite and a SMA/GFRP hybrid composite has been obtained.Two SMA alloys have been studied as reinforcement and characterized by thermo-mechanical tests. Thearchitecture of the hybrid composite has been numerically optimized in order to enhance the structural dampingof the host GFRP laminated, without significant changes of the specific weight and of the flexural stiffness. Thedesign and the resultant high damping material are interesting and will be useful in general for applicationsrelated to passive damping. The application to a new designed lateral horn of railway collector of the Italianhigh speed trains is discussed

Role of B diffusion in the interfacial Dzyaloshinskii-Moriya interaction in Ta / Co₂₀ Fe₆₀B₂₀/MgO nanowires

We report on current-induced domain wall motion in Ta/Co20Fe60B20/MgO nanowires. Domain walls are observed to move against the electron flow when no magnetic field is applied, while a field along the nanowires strongly affects the domain wall motion velocity. A symmetric effect is observed for up-down and down-up domain walls. This indicates the presence of right-handed domain walls, due to a Dzyaloshinskii-Moriya interaction (DMI) with a DMI coefficient D=+0.06mJ/m2. The positive DMI coefficient is interpreted to be a consequence of B diffusion into the Ta buffer layer during annealing, which was observed by chemical depth profiling measurements. The experimental results are compared to one-dimensional model simulations including the effects of pinning. This modeling allows us to reproduce the experimental outcomes and reliably extract a spin-Hall angle θSH=-0.11 for Ta in the nanowires, showing the importance of an analysis that goes beyond the model for perfect nanowires

Experimental and numerical characterization of high damping martensitic CuAlMn sheets

This paper deals with the experimental and numerical characterization of a high damping CuAlMn sheet with a martensitic micro-structure at ambient temperature. A Cu-Al-Mn shape memory alloy containing 11.65 wt.% of Al and 3 wt.% of Mn, was cast and hot rolled to the thickness of 0.4–0.3 mm. Transformation temperatures, micro-structure and mechanical properties were studied. Effects of the heat treatment on damping were investigated, identifying the proper heat treatment to obtain a higher damping. Having to model the amplitude dependent damping of the material investigated, a material model was developed based of cyclic behavior under traction-compression load. The model was validated with experiments on the non-linear damping of the material

High temperature initiation and propagation of cracks in 12%Cr-steel turbine disks

This work aims to study the crack propagation in 12%Cr steel for turbine disks. Creep Crack Growth (CCG) tests on CT specimens have been performed to define the proper fracture mechanics which describes the initiation of the crack propagation and the crack growth behaviour for the material at high temperature. Results have been used to study the occurrence of crack initiation on a turbine disk at the extreme working temperature and stress level experienced during service, and validate the use of C* integral in correlating creep growth rate on the disk component, in case C* is numerically calculated through FEM analysis or calculated by the use of reference stress concept