A implantação dos instrumentos de gerenciamento dos recursos hídricos no estado do Rio Grande do Sul/Br

Apesar dos avanços na implementação dos instrumentos de planejamento, há ainda muito a ser feito para que os mesmos se efetivem completamente em todo o Estado do Rio Grande do Sul (RS). Entre as perspetivas ao gerenciamento está o incentivo atual na formulação e conclusão da Política Estadual de Recursos Hídricos e dos Planos de Bacia Hidrográfica. Este esforço permitirá consolidar o enquadramento legal e estabelecer as bases da outorga e cobrança. Além disso, verifica-se um esforço na consolidação do Sistema Estadual de Informação de Recursos Hídricos para sistematizar as informações e agilizar os processos. Neste contexto, pode-se verificar que o Estado do RS, mesmo sendo um dos pioneiros na questão das discussões dos recursos hídricos ainda passa por desafios e entraves a execução e efetivação da legislação dos recursos hídricos e várias são as questões a avançar e discutir. Com este artigo, temos por objetivo analisar o contexto da implantação dos instrumentos de gerenciamento dos recursos hídricos no Estado do RS/BR e pretendemos dar mais um contributo na discussão e reflexão da gestão da água no Brasil

A comparative Digital Soil Mapping (DSM) study using a non-supervised clustering analysis and an expert knowledge based model - A case study from Ahuachapán, El Salvador

DSM is the inference of spatial and temporal soil property variations using mathematical models based on quantitative relationships between environmental information and soil measurements. The quality of DSM information depends on the method and environmental covariates used for its estimations. We compared two DSM methods to predict soil properties such as Organic Matter “MO” (%), Sand (%), Clay (%), pH (H2O), Phosphorus (mg/kg), Effective Cationic Exchange Capacity “CICE” (cmol/L), Potassium (cmol/L) and Water Holding Capacity (mm/m) for the department of Ahuachapán in El Salvador to support the activities of the Agriculture Landscape Restoration Initiative (ALRI) in the countr

A comparative Digital Soil Mapping (DSM) study using a non-supervised clustering analysis and an expert knowledge based model - A case study from Ahuachapán, El Salvador

DSM is the inference of spatial and temporal soil property variations using mathematical models based on quantitative relationships between environmental information and soil measurements. The quality of DSM information depends on the method and environmental covariates used for its estimations. We compared two DSM methods to predict soil properties such as Organic Matter “MO” (%), Sand (%), Clay (%), pH (H2O), Phosphorus (mg/kg), Effective Cationic Exchange Capacity “CICE” (cmol/L), Potassium (cmol/L) and Water Holding Capacity (mm/m) for the department of Ahuachapán in El Salvador to support the activities of the Agriculture Landscape Restoration Initiative (ALRI) in the countr

Superposition relations of microfabrics in the northern hanging-wall block

This study reports alternation of D2 extension-related and D3 contraction-related microfabrics in the northern hanging wall block of a gneiss dome-like structure recognized in the Évora Massif (Ossa-Morena Zone). In the Arraiolos – Santo Antonio de Alcorrego traverse high- to low-grade mylonites are dominant. Microfabrics related to D2 ductile deformation and M2 high-amphibolite to greenschist facies characterize an extensional shear zone with telescoping metamorphic isograds. D2 microstructures indicate shear sense with top-to-SE. Superposition of D3 contraction developed under greenschist facies (M3) producing folding of D2 microfabrics, mylonitization of granites along strike-slip shear zones and retrogression of M2 mineral assemblages

Colour profile analysis of Port Wines by different instrumental and visual methods

BACKGROUND: Wine colour is an important quality parameter, being the first sensorial attribute evaluated during wine tasting. The perception of wine colour can be different depending on many factors, including the depth of the sample under observation. The main objectives of the present study were to measure the colour of Port wines, using CIE L*a*b* parameters at different depths with different instrumental techniques (spectrophotometry and colorimetry), and to compare the obtained results with the sensory (visual) perception of colour samples. RESULTS: Representative profiles of Lightness (L*), Hue (H*) and Chroma (C*) at different depths were obtained using Port wine samples from different categories and ages. In general, relatively good correlations between the colorimetric and spectrophotometric methods were obtained for the L* and H* parameters. The results of the sensory tests also showed good correlations between the visually-assessed hue scores and the colorimetric measurements of the H* parameter, particularly at the lower depths tested (up to 4.0 mm). CONCLUSIONS: Overall, the results indicate that the colorimetric method can be used for estimating wine colour parameters, providing useful information about the colour profile of wines at different depthsinfo:eu-repo/semantics/acceptedVersio

Waste identification diagrams with OEE data

Existing techniques to represent production units are not very effective in representing several dimensions of production, limiting the extent to which diagnose and problem identification is accrued. Value Stream Mapping is one such technique which, although very popular among lean practitioners, exhibits a number of practical limitations. In this paper the authors present the all new Waste Identification Diagram, encompassing a number of new features and improved graphics capabilities, which makes it a feasible alternative technique to that of VSM, while extending its breath of application by integrating Overall Equipment effectiveness data into the diagrams. An example application of the WID technique to a real production unit will be presented, screening its effectiveness for diagnosing problems, measuring performance and providing key visual information and precious clues for improvement

Early Carboniferous synorogenic basins evolution of the Ossa-Morena and

The stratigraphic record of the Early Carboniferous in Iberia reveals that synorogenic deposition was important and occurred simultaneously in basins influenced by extension and contraction with gravitational instability. In NW Iberia (Galicia – Trás-os-Montes Zone) contraction was dominant and the deposition took place in a forebulge outwards from the nappe stacking front. Here, synorogenic deposits were strongly affected by folding and thrusting as they were imbricated and incorporated in the allochthonous pile. In a different way, in SW Iberia (Ossa-Morena Zone) synorogenic deposition was influenced by extension and happened simultaneously with the onset of significant magmatism

Design of a carbon capture system for oxy-fuel combustion in compression ignition engines with exhaust water recirculation

[EN] The oxy-fuel combustion engine concept with onboard oxygen generation and carbon capture (CC) is studied using as a starting point a baseline oxy-fuel combustion layout coupled to a mixed ionic-electronic conducting membranes for producing oxygen (O2) from the air. A CC system is designed accounting for the flash-out temperatures and the operating pressure of the last CO2 purification step. The proposed engine concept is optimized through the product of useful effective efficiency and engine brake power,which is maximized actuating on the start of injection (SOI) for every assessed gas path layouts. The additional cooling power required by the carbon capture system (CC) is also contemplated . Initially, two approaches are compared when the CC is coupled to the O2 generation unit, including or not an intake cooler. The use of intake cooler yields better engine performance than removing it but increases the cooling power requirements significantly. The extreme results from using or not the intake cooler, indicates that a proper solution could combine both cases, approaching for a different cooling concept. A mixer model is developed to recirculate part of the water condensed in the CC towards the cylinder inlet to lower the intake gas temperature and increase the oxidizer heat capacity ratio. From this layout, an optimum setup for SOI and recirculated water mass flow is found considering the trade-off between additional cooling power and engine performance. Indeed, this case reduces the total ICE additional cooling power required by the exclusive use of an intake cooler by about 27% and improves the engine performance by about 20% in comparison to the lack of intake cooling of the charge flow.This work has been partially supported by Grant PID2021-123351OB-I00 funded by MCIN/AEI/10.13039/501100011033 and, as appropriate, by "ERDF A way of making Europe". In addition, the work has been supported by Grant CIPROM/2021/061 funded by Generalitat Valenciana, Spain. Finally, the Ph.D. candidate Vitor Farias has been funded by Generalitat Valenciana, Spain (GRISOLIAP/2020/078) .Luján, JM.; Arnau Martínez, FJ.; Piqueras, P.; Farias-Da Silva, VH. (2023). Design of a carbon capture system for oxy-fuel combustion in compression ignition engines with exhaust water recirculation. Energy Conversion and Management. 284:1-19. https://doi.org/10.1016/j.enconman.2023.11697911928