Analysis of the damage effect of femtosecond-laser irradiation on extreme ultraviolet Mo/Si multilayer coating

n/

The fisheye of the comet interceptor's EnVisS camera

Entire Visible Sky (EnVisS) camera is one of the payload proposed for the ESA selected F-Class mission Comet Interceptor. The main aim of the mission is the study of a dynamic new comet, or an interstellar object, entering the inner solar system for the first time. The Comet Interceptor mission is conceived to be composed of three spacecraft: a parent spacecraft A and two, spacecraft B1 and B2, dedicated to a close and risky fly-by. EnVisS will be mounted on spacecraft B2, which is foreseen to be spin-stabilized. The EnVisS camera is designed to capture the entire sky in some visible wavelength bands while the spacecraft pass through the comet's coma. EnVisS optical head is composed of a fisheye lens with a field of view of 180° x 40° coupled with an imaging detector equipped with both band-pass and polarimetric filters. The design of fisheye lenses requires to take into account some issues typical of very wide-angle lenses. The fundamental origin of the optical problems resides on the entrance pupil shift at large angle, where the paraxial approximation is no more valid: chief rays angles on the object side are not preserved passing through the optics preceding the aperture stop (fore-optics). This effect produces an anamorphic deformation of the image on the focal plane, i.e. the focal length is changing along the elevation angles. Tracing the rays appropriately requires some effort by the designer. It has to be considered that distortion, including anamorphism, is an aberration that does not affect the quality of a point source image, thus it can be present also in well corrected lenses. In this paper the optical design of the fisheye lens, that will be mounted on the EnVisS camera for the ESA F-class "Comet Interceptor" mission, will be presented together with the initial optical requirements and the final expected optical performances

Long term durability of protected silver coating for the mirrors of Ariel mission telescope

Ariel (Atmospheric Remote-sensing Infrared Exoplanet Large survey) is the fourth medium-size mission in ESA “Cosmic Vision” program. It is scheduled to launch in 2029. Ariel will conduct spectroscopic and photometric observations of a large sample of known exoplanets to survey their atmospheres with the transit method. Ariel is based on a 1 m class telescope designed for the visible and near infrared spectrum, but optimized specifically for spectroscopy in the waveband between 1.95 and 7.8 μm. Telescope and instruments will be operating in cryogenic conditions in the range 40-50 K. The telescope mirrors will be manufactured in aluminum 6061, with a protected silver coating deposited onto the optical surface to enhance reflectivity and prevent oxidation and corrosion. During the preliminary definition phase of the development work, leading to mission adoption, a silver coating with space heritage was selected and underwent a qualification process on disc-shaped samples of the mirrors substrate material. The samples were deposited through magnetron sputtering and then subjected to a battery of tests, including environmental durability tests, accelerated aging, cryogenic tests and mechanical resistance tests. Further to the qualification, the samples have been stored in cleanroom conditions and periodically re-examined and measured to detect any sign of coating degradation. The test program, still ongoing at the time of writing this article, consists of visual inspection with a high intensity lamp, spectral reflectance measurements and Atomic Force Microscopy (AFM) evaluation of nanometric surface features. The goal is to ensure stability of the optical performance, in terms of coating reflectance, during a time span comparable to the period that the actual mirrors of the telescope will spend in average cleanroom conditions. This study presents the interim results after three years of storage

The optical head of the EnVisS camera for the Comet Interceptor ESA mission: Phase 0 study

EnVisS (Entire Visible Sky) is an all-sky camera specifically designed to fly on the space mission Comet Interceptor. This mission has been selected in June 2019 as the first European Space Agency (ESA) Fast mission, a modest size mission with fast implementation. Comet Interceptor aims to study a dynamically new comet, or interstellar object, and its launch is scheduled in 2029 as a companion to the ARIEL mission. The mission study phase, called Phase 0, has been completed in December 2019, and then the Phase A study had started. Phase A will last for about two years until mission adoption expected in June 2022. The Comet Interceptor mission is conceived to be composed of three spacecraft: spacecraft A devoted to remote sensing science, and the other two, spacecraft B1 and B2, dedicated to a fly-by with the comet. EnVisS will be mounted on spacecraft B2, which is foreseen to be spin-stabilized. The camera is developed with the scientific task to image, in push-frame mode, the full comet coma in different colors. A set of ad-hoc selected broadband filters and polarizers in the visible range will be used to study the full scale distribution of the coma gas and dust species. The camera configuration is a fish-eye lens system with a FoV of about 180°x45°. This paper will describe the preliminary EnVisS optical head design and analysis carried out during the Phase 0 study of the mission

Damage and ablation of large band gap dielectrics induced by a 46.9 nm laser beam

We applied a 0.3 mJ, 1.7 ns, 46.9 nm soft X-ray Argon laser to ablate the surface of large band gap dielectrics: CaF{sub 2} and LiF crystals. The ablation versus the fluence of the soft X-ray beam has been studied varying the fluence in the range of 0.05-3 J/cm{sup 2}. An ablation threshold of 0.06 and 0.1 J/cm{sup 2} and an ablation depth of 14 and 20 nm have been found for CaF{sub 2} and LiF, respectively. These results define new ablation conditions for these large band gap dielectrics, which can be of interest for the fine processing of these materials

In-flight radiometric calibration of the Metis Visible Light channel using stars and comparison with STEREO-A/COR2 data

Context. We present the results for the in-flight radiometric calibration performed for the Visible Light (VL) channel of the Metis coronagraph on board Solar Orbiter. Aims. The radiometric calibration is a fundamental step in building the official pipeline of the instrument, devoted to producing the calibrated data in physical units (L2 data). Methods. To obtain the radiometric calibration factor (ÏμVL), we used stellar targets transiting the Metis field of view. We derived ÏμVLby determining the signal of each calibration star by means of the aperture photometry and calculating its expected flux in the Metis band pass. The analyzed data set covers the time range from the beginning of the Cruise Phase of the mission (June 2020) until March 2021. Results. Considering the uncertainties, the estimated factor ÏμVLis in a good agreement with that obtained during the on-ground calibration campaign. This implies that up to March 2021 there was no measurable reduction in the VL channel throughput. Finally, we compared the total and polarized brightness visible light images of the solar corona acquired with Metis and STEREO-A/COR2 during the November 2020 superior conjunction of these instruments. A general good agreement was obtained between the images of these instruments for both the total and polarized brightness