The role of sublimation as a driver of climate signals in the water isotope content of surface snow: Laboratory and field experimental results

Ice core water isotope records from Greenland and Antarctica are a valuable proxy for paleoclimate reconstruction, yet the processes influencing the climate signal stored in the isotopic composition of the snow are being challenged and revisited. Apart from precipitation input, post-depositional processes such as wind-driven redistribution and vapor–snow exchange processes at and below the surface are hypothesized to contribute to the isotope climate signal subsequently stored in the ice. Recent field studies have shown that surface snow isotopes vary between precipitation events and co-vary with vapor isotopes, which demonstrates that vapor–snow exchange is an important driving mechanism. Here we investigate how vapor–snow exchange processes influence the isotopic composition of the snowpack. Controlled laboratory experiments under forced sublimation show an increase in snow isotopic composition of up to 8 ‰ δ18O in the uppermost layer due to sublimation, with an attenuated signal down to 3 cm snow depth over the course of 4–6 d. This enrichment is accompanied by a decrease in the second-order parameter d-excess, indicating kinetic fractionation processes. Our observations confirm that sublimation alone can lead to a strong enrichment of stable water isotopes in surface snow and subsequent enrichment in the layers below. To compare laboratory experiments with realistic polar conditions, we completed four 2–3 d field experiments at the East Greenland Ice Core Project site (northeast Greenland) in summer 2019. High-resolution temporal sampling of both natural and isolated snow was conducted under clear-sky conditions and demonstrated that the snow isotopic composition changes on hourly timescales. A change of snow isotope content associated with sublimation is currently not implemented in isotope-enabled climate models and is not taken into account when interpreting ice core isotopic records. However, our results demonstrate that post-depositional processes such as sublimation contribute to the climate signal recorded in the water isotopes in surface snow, in both laboratory and field settings. This suggests that the ice core water isotope signal may effectively integrate across multiple parameters, and the ice core climate record should be interpreted as such, particularly in regions of low accumulation.publishedVersio

Effects of neutral-beam injection and gas puffing on deuterium and impurity levels in the scrapeoff layer of ISX-B

Plasma-material interactions in the scrapeoff region of a tokamak have important effects on the overall performance of the machine. In order to prudently select the most-appropriate materials for walls, limiters, and armor plate, it is necessary to characterize the plasma that interacts with these surfaces and to understand what effect different modes of operation of the tokamak have on plasma characteristics. We have made a series of measurements on the ISX tokamak using deposition-probe techniques to identify and quantify the impurities (Z greater than or equal to 8) in the limiter shadow, and to determine the temporal behavior of both impurity and plasma particles in this region. These measurements have been made under a variety of tokamak operating conditions, including both ohmic and neutral-beam heated discharges. The results are interpreted in terms of edge conditions, impurity introduction, gas puffing, and the relative importance of wall and limiter contributions

Optical properties of multicomponent cadmium-silver nanocluster composites formed in silica by sequential ion implantation

Formation and optical properties of nanometer dimension metal colloid composites formed by sequential implantation of Cd then Ag and by single element implantations of Cd and Ag in silica were characterized by TEM and optical spectroscopy. A nominal dose of 6x10{sup 16} ions/cm{sup 2} as determined by current integration was used for both ion species. Doses used for the sequential implantations were a 1 to 1 ratio of Cd to Ag. Sequential implantations of Cd and Ag led to formation of both multi-component metal nanoclusters and elemental nanoclusters. Electron diffraction indicated that the polycrystalline particles of Ag{sub 5}Cd{sub 8} and elemental Ag were formed. The optical response was consistent with results expected from effective medium theory

Formation of oriented particles in an amorphous host: ZnS nanocrystals in silicon

Processes for incorporating randomly oriented crystalline precipitates in an amorphous host can be traced back to the 17th century when Cassius produced “gold ruby” glass. In this glass, octahedral colloidal precipitates of gold scatter light by the Mie process to produce a deep red color. In contrast to gold ruby glass, we describe a type of material in which the crystalline precipitates are crystallographically aligned in a coherent manner—even though they are dispersed in an amorphous matrix. Ion implantation and thermal processing are first used to form zinc sulfide nanocrystals that are coherently oriented with respect to a crystalline Si host. The Si is then amorphized by ion irradiation leaving the highly radiation-resistant ZnS precipitates in an aligned crystalline state. The process is anticipated to find applications in the creation of surfaces with unique optoelectronic properties. © 1999 American Institute of Physics.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/69678/2/APPLAB-74-5-697-1.pd

Linear and Nonlinear Optical Properties of Metal Nanocluster-Silica Composites Formed by Sequential Implantation of Ag and Cu

Nanometer dimension metal colloids were formed in silica by sequential implantation of Ag and Cu ions. The Ag and Cu were implanted with relative ratios of Ag to Cu of 9:3, 6:6, and 3:9. The total nominal dose was 12 {times} 10{sup 16} ions/cm{sup 2}. TEM techniques were used to examine colloid size and size distributions. The linear optical response was measured from 200 to 900 nm. The nonlinear optical properties were measured using the z-scan technique at a wavelength of 570 nm. The linear and nonlinear optical properties were found to be dependent upon the relative ratio of sequentially implanted Ag to Cu. The results are consistent with effective medium theory

Efficacy of tunnel technique in the treatment of localized and multiple gingival recessions: A systematic review and metaâ analysis

BackgroundTunnel technique (TUN) has recently gained popularity among clinicians for its promising clinical and esthetic results in treating gingival recession (GR) defects. However, evidence regarding the efficacy of the TUN is not yet conclusive. Therefore, the aim of the present systematic review and metaâ analysis was to investigate the predictability of TUN and its comparison to the coronally advanced flap (CAF) procedure.MethodsA literature search on PubMed, Cochrane libraries, EMBASE, and handâ searched journals through November 2017 was conducted to identify clinical studies investigating TUN for root coverage procedures. Only randomized controlled trials (RCTs) were considered for the metaâ analysis comparing TUN to CAF.ResultsA total of 20 articles were included in the systematic review and six in the metaâ analysis. The overall calculated mean root coverage (mRC) of TUN for localized and multiple GR defects was 82.75 ± 19.7% and 87.87 ± 16.45%, respectively. Superior results were found in maxillary and in Miller Class I and II GR defects. TUN outcomes may have been enhanced by splitâ thickness flap preparation and microsurgical approach. TUN and CAF had comparable mRC, complete root coverage (CRC), keratinized tissue gain, and root coverage esthetic score when varying combinations of graft material were evaluated. However, CAF demonstrated superior outcomes to TUN when the same graft (connective tissue or acellular dermal matrix) was used in both techniques.ConclusionsTUN is an effective procedure in treating localized and multiple GR defects. Limited evidence is available comparing TUN to CAF; however, CAF seemed to be associated with higher percentage of CRC than was TUN when the same grafts (connective tissue or acellular dermal matrix) were used in both techniques.Peer Reviewedhttps://deepblue.lib.umich.edu/bitstream/2027.42/145520/1/jper10154.pdfhttps://deepblue.lib.umich.edu/bitstream/2027.42/145520/2/jper10154_am.pd

Synthesis, optical properties, and microstructure of semiconductor nanocrystals formed by ion implantation

High-dose ion implantation, followed by annealing, has been shown to provide a versatile technique for creating semiconductor nanocrystals encapsulated in the surface region of a substrate material. The authors have successfully formed nanocrystalline precipitates from groups IV (Si, Ge, SiGe), III-V (GaAs, InAs, GaP, InP, GaN), and II-VI (CdS, CdSe, CdS{sub x}Se{sub 1{minus}x}, CdTe, ZnS, ZnSe) in fused silica, Al{sub 2}O{sub 3} and Si substrates. Representative examples will be presented in order to illustrate the synthesis, microstructure, and optical properties of the nanostructured composite systems. The optical spectra reveal blue-shifts in good agreement with theoretical estimates of size-dependent quantum-confinement energies of electrons and holes. When formed in crystalline substrates, the nanocrystal lattice structure and orientation can be reproducibly controlled by adjusting the implantation conditions

Acellular dermal matrix and coronally advanced flap or tunnel technique in the treatment of multiple adjacent gingival recessions. A 12-year follow-up from a randomized clinical trial

AimTo evaluate the long-term outcomes of Acellular Dermal Matrix (ADM) with Coronally Advanced Flap (CAF) or Tunnel technique (TUN) in the treatment of multiple adjacent gingival recessions (MAGRs).Material and methodsNineteen of the original 24 patients contributing to a total number of 33 sites for CAF and 34 for TUN were available for the 12 years follow-up examination. Recession depth, mean root coverage (mRC), keratinized tissue width (KTW), gingival thickness (GT) were evaluated and compared with baseline values and 6-months results. Regression analysis was performed to identify factors related to the stability of the gingival margin.ResultsA highly significant drop in mRC was observed for both groups from the 6 months timepoint to the 12 years recall (p  .05). KTW - 2 mm and GT - 1.2 mm at 6-months were two predictors for stability of the gingival margin (p = .03 and p = .01, respectively).ConclusionsA significant relapse of the gingival margin of MAGRs treated with CAF or TUN + ADM was observed after 12 years.Peer Reviewedhttps://deepblue.lib.umich.edu/bitstream/2027.42/151340/1/jcpe13163_am.pdfhttps://deepblue.lib.umich.edu/bitstream/2027.42/151340/2/jcpe13163.pd

Fabrication and modification of metal nanocluster composites using ion and laser beams

Metal nanocluster composites have attractive properties for applications in nonlinear optics. However, traditional fabrication techniques -- using melt-glass substrates -- are severely constrained by equilibrium thermodynamics and kinetics. This paper describes the fabrication of metal nanoclusters in both crystalline and glassy hosts by ion implantation and pulsed laser deposition. The size and size distribution of the metal nanoclusters can be modified by controlling substrate temperature during implantation, by subsequent thermal annealing, or by laser irradiation. The authors have characterized the optical response of the composites by absorption and third-order nonlinear-optical spectroscopies; electron and scanning-probe microscopies have been used to benchmark the physical characteristics of the composites. The outlook for controlling the structure and nonlinear optical response properties of these nanophase materials appears increasingly promising

Stratigraphic noise and its potential drivers across the plateau of Dronning Maud Land, East Antarctica

Stable water isotopologues of snow, firn and ice cores provide valuable information on past climate variations. Yet single profiles are generally not suitable for robust climate reconstructions. Stratigraphic noise, introduced by the irregular deposition, wind-driven erosion and redistribution of snow, impacts the utility of high-resolution isotope records, especially in low-accumulation areas. However, it is currently unknown how stratigraphic noise differs across the East Antarctic Plateau and how it is affected by local environmental conditions. Here, we assess the amount and structure of stratigraphic noise at seven sites along a 120 km transect on the plateau of Dronning Maud Land, East Antarctica. Replicated oxygen isotope records of 1 m length were used to estimate signal-to-noise ratios as a measure of stratigraphic noise at sites characterised by different accumulation rates (43–64 mm w.e. a−1), snow surface roughnesses and slope inclinations. While we found a high level of stratigraphic noise at all sites, there was also considerable variation between sites. At sastrugi-dominated sites, greater stratigraphic noise coincided with stronger surface roughnesses, steeper slopes and lower accumulation rates, probably related to increased wind speeds. These results provide a first step to modelling stratigraphic noise and might guide site selection and sampling strategies for future expeditions to improve high-resolution climate reconstructions from low-accumulation regions.</p