803 research outputs found
Structural and chemical investigations of adapted Siemens feed rods for an optimized float zone process
The optimization of the float zone process for industrial application is a promising way to crystallize high purity silicon for high efficiency solar cells with reduced process costs. We investigated two differently produced Siemens rods which should be used as feed material for the float zone process. The aim is to identify and to improve material properties of the feed rods which have a high impact to the float zone process. We show here microstructural and chemical analysis comparing feed rods manufactured under standard conditions and under float zone adapted conditions. To resolve the growth behavior of the grains SEM/EBSD mappings are performed at different positions. TEM analyses are used to investigate the interface region between the mono- and the multicrystalline silicon within the Siemens feed rod. Additionally, drilled cores are cut out from the feed rods containing the region of the slim rod. Afterwards, the drilled cores are crystallized with the float zone process. Finally, carbon and oxygen measurements with FT-IR spectrometry on different positions of the crystallized drilled cores of the Siemens feed rods show the influence of the slim rod material to the float zone process
Recommended from our members
Influence of slim rod material properties to the Siemens feed rod and the float zone process
The identification and understanding of material properties influencing the float zone process is important to crystallize high purity silicon for high efficiency solar cells. Also the knowledge of minimal requirements to crystallize monocrystalline silicon with the float zone process is of interest from an economic point of view. In the present study, feed rods for the float zone process composed of a central slim rod and the deposited silicon from the Siemens process are investigated. Previous studies have shown that the slim rod has a significant impact on the purity and suitability for further crystallization processes. In particular, contaminations like substitutional carbon and the presence of precipitates as well as the formation of oxide layers play an important role and are investigated in detail. For this purpose different slim rod materials were used in deposition and float zone crystallization experiments. Samples were prepared by cross sectioning and core drilling of Siemens rods, which were recrystallized with the float zone process. Recrystallized drilled cores are analyzed with FT-IR spectrometry concerning the carbon and oxygen content. To estimate the grain growth behavior on the slim rod surface in dependence of the used slim rod material, EBSD mappings inside a SEM are performed on squared and circular slim rods. TEM analysis was used to investigate the presence of an oxide layer at the interface between slim rod and deposited polycrystalline silicon. Additionally the influence of a nitrogen-containing gas atmosphere during the slim rod pulling is investigated by IR microscopy and ToF-SIMS regarding Si3N4 precipitation
Sicherheitspotenzial automatisierter Fahrzeuge: Erkenntnisse aus der Unfallforschung
In seiner Metaanalyse dokumentiert Thomas Winkle beispielhaft Analysen für das Potenzial sicherheitserhöhender Fahrzeugsysteme mit geringeren Automatisierungsgraden. Für eine Prognose des Sicherheitspotenzials hoch- oder vollautomatisierter Fahrzeuge sind dagegen Annahmen erforderlich, da seriennahe Funktionsausprägungen bislang fehlen. Für Testmethoden zur Entwicklung und Auslegung sicherer automatisierter Fahrzeuge mit ökonomisch vertretbarem Aufwand empfiehlt der Autor eine Zusammenführung weltweit verfügbarer Verkehrsunfalldaten, Wetterdaten und Verkehrssimulationen. Daraus sind länderübergreifend prospektiv reale Verkehrsszenarien mit statistischer Relevanz zur Beherrschbarkeit kritischer Situationen und Fehlerprozesse sowie stochastische Modelle (zusammen mit virtuellen Labor- oder Fahrsimulatorversuchen) auswertbar
Specific heat and magnetization study on single crystals of a frustrated, quasi one-dimensional oxide: Ca3Co2O6
Specific heat and magnetization measurements have been carried out under a
range of magnetic fields on single crystals of Ca3Co2O6. This compound is
composed of Ising magnetic chains that are arranged on a triangular lattice.
The intrachain and interchain couplings are ferromagnetic and
antiferromagnetic, respectively. This situation gives rise to geometrical
frustration, that bears some similarity to the classical problem of a
two-dimensional Ising triangular antiferromagnet. This paper reports on the
ordering process at low-T and the possibility of one-dimensional features at
high-T.Comment: 7 pages, 6 figures, accepted for publication in PR
Electronic States in Two-Dimensional Triangular Cobalt Oxides: Role of Electronic Correlation
We obtain the electronic states and structures of two-dimensional cobalt
oxides, NaCoO (x=0, 0.35, 0.5 and 0.75) by utilizing the
full-potential linear muffin-tin orbitals (FP-LMTO) methods, from which some
essential electronic interaction parameters are estimated: the bare on-site
Coulomb interaction of cobalt U=7.5 eV renormalizes to 5 eV for x=0.35,
the hybridizations t and t are -1.40 and 0.70 eV,
respectively. The density of states at E decreases from 6-7 states/eV in
the local density approximation (LDA) to about 1.0 states/eV in the LDA+U
scheme. The role of the intercalation of water molecules and the microscopic
mechanism of the superconductivity in NaCoOmHO is
discussed.Comment: minor errors correcte
Vagus nerve stimulation for depression: efficacy and safety in a European study
Background Vagus nerve stimulation (VNS) therapy is associated with a decrease in seizure frequency in partial-onset seizure patients. Initial trials suggest that it may be an effective treatment, with few side-effects, for intractable depression. Method An open, uncontrolled European multi-centre study (D03) of VNS therapy was conducted, in addition to stable pharmacotherapy, in 74 patients with treatment-resistant depression (TRD). Treatment remained unchanged for the first 3 months; in the subsequent 9 months, medications and VNS dosing parameters were altered as indicated clinically. Results The baseline 28-item Hamilton Depression Rating Scale (HAMD-28) score averaged 34. After 3 months of VNS, response rates (50% reduction in baseline scores) reached 37% and remission rates (HAMD-28 score <10) 17%. Response rates increased to 53% after 1 year of VNS, and remission rates reached 33%. Response was defined as sustained if no relapse occurred during the first year of VNS after response onset; 44% of patients met these criteria. Median time to response was 9 months. Most frequent side-effects were voice alteration (63% at 3 months of stimulation) and coughing (23%). Conclusions VNS therapy was effective in reducing severity of depression; efficacy increased over time. Efficacy ratings were in the same range as those previously reported from a USA study using a similar protocol; at 12 months, reduction of symptom severity was significantly higher in the European sample. This might be explained by a small but significant difference in the baseline HAMD-28 score and the lower number of treatments in the current episode in the European stud
Critical Dynamics of Magnets
We review our current understanding of the critical dynamics of magnets above
and below the transition temperature with focus on the effects due to the
dipole--dipole interaction present in all real magnets. Significant progress in
our understanding of real ferromagnets in the vicinity of the critical point
has been made in the last decade through improved experimental techniques and
theoretical advances in taking into account realistic spin-spin interactions.
We start our review with a discussion of the theoretical results for the
critical dynamics based on recent renormalization group, mode coupling and spin
wave theories. A detailed comparison is made of the theory with experimental
results obtained by different measuring techniques, such as neutron scattering,
hyperfine interaction, muon--spin--resonance, electron--spin--resonance, and
magnetic relaxation, in various materials. Furthermore we discuss the effects
of dipolar interaction on the critical dynamics of three--dimensional isotropic
antiferromagnets and uniaxial ferromagnets. Special attention is also paid to a
discussion of the consequences of dipolar anisotropies on the existence of
magnetic order and the spin--wave spectrum in two--dimensional ferromagnets and
antiferromagnets. We close our review with a formulation of critical dynamics
in terms of nonlinear Langevin equations.Comment: Review article (154 pages, figures included
Molecular and phenotypic profiling from base to the crown in maritime pine wood-forming tissue
Research• Environmental, developmental and genetic factors affect variation in wood properties
at the chemical, anatomical and physical levels. Here, the phenotypic variation observed
along the tree stem was explored and the hypothesis tested that this variation could be
the result of the differential expression of genes/proteins during wood formation.
• Differentiating xylem samples of maritime pine (Pinus pinaster) were collected
from the top (crown wood, CW) to the bottom (base wood, BW) of adult trees.
These samples were characterized by Fourier transform infrared spectroscopy (FTIR)
and analytical pyrolysis. Two main groups of samples, corresponding to CW and BW,
could be distinguished from cell wall chemical composition.
• A genomic approach, combining large-scale production of expressed sequence
tags (ESTs), gene expression profiling and quantitative proteomics analysis, allowed
identification of 262 unigenes (out of 3512) and 231 proteins (out of 1372 spots)
that were differentially expressed along the stem.
• A good relationship was found between functional categories from transcriptomic
and proteomic data. A good fit between the molecular mechanisms involved in
CW–BW formation and these two types of wood phenotypic differences was also
observed. This work provides a list of candidate genes for wood properties that will
be tested in forward genetic
Synchronization of multi-phase oscillators: An Axelrod-inspired model
Inspired by Axelrod's model of culture dissemination, we introduce and
analyze a model for a population of coupled oscillators where different levels
of synchronization can be assimilated to different degrees of cultural
organization. The state of each oscillator is represented by a set of phases,
and the interaction --which occurs between homologous phases-- is weighted by a
decreasing function of the distance between individual states. Both ordered
arrays and random networks are considered. We find that the transition between
synchronization and incoherent behaviour is mediated by a clustering regime
with rich organizational structure, where some of the phases of a given
oscillator can be synchronized to a certain cluster, while its other phases are
synchronized to different clusters.Comment: 6 pages, 5 figure
- …