A silicon/lithium niobate hybrid photonic material platform produced by laser processing

Silicon (Si) and lithium niobate (LiNbO3) are two materials that are synonymous with the electronics and photonics industries respectively and are supported by a significant amount of technological know-how. It has been suggested and demonstrated recently that Si could also be used for the production of integrated photonic devices, however its performance can be limited by the transmission cutoff at short wavelengths, a relatively high two-photon absorption, and a zero second order nonlinear optical susceptibility. LiNbO3 on the other hand is a very good dielectric material with very little electronic functionality and high second order nonlinearity. Thus, as these two materials have complementary properties, there is significant merit in combining them into a single hybrid system that will benefit from the properties of its constituents, as demonstrated via direct bonding in [1]. Here we propose a route for producing such a hybrid material system via local laser processing of a low cost, easy to produce amorphous silicon (a-Si) film deposited onto a single crystal LiNbO3 substrate. This research is based on recent encouraging results of a laser based crystallization process obtained in a-Si core optical fibres that not only produced crystallites with very large aspect ratios, but also allowed for tuning of the Si bandgap [2].The emphasis of this laser-processing route has been on achieving structures with large crystals and low surface roughness in order to obtain good photonic and electronic device performance. Interestingly it was revealed that, apart from the expected local crystallization of the a-Si film, this particular system exhibited a plethora of interesting and potentially useful effects including the direct formation of optical waveguides in LiNbO3, enabled ferroelectric domain reversal and the spontaneous formation of periodic structural features on the Si film, shown in the figure below

Laser processing of amorphous silicon on lithium niobate for photonic applications

Silicon (Si) and lithium niobate (LiNbO3) are two materials that are synonymous with the electronics and photonics industries respectively and are supported by a significant amount of technological know-how. It has been suggested and demonstrated recently that Si could also be used for the production of integrated photonic devices, however its performance can be limited by the transmission cutoff at short wavelengths, a relatively high two-photon absorption, and lack of second order nonlinear optical susceptibility. LiNbO3 on the other hand is a very good dielectric material with high second order nonlinearity but with very little electronic functionality. It can be envisaged however that these two materials have complementary properties therefore there is significant merit in combining them into a single hybrid system that will benefit from the properties of its constituents as demonstrated in [1] on a directly bonded single crystal hybrid. In this contribution we will present results on laser processing of amorphous silicon films deposited on LiNbO3 and other substrates suggesting a new route for the fabrication of Si based photonic circuits. This research is based on recent encouraging results of a laser based crystallization process obtained in a-Si core optical fibres that not only obtained crystallites with very large aspect ratio but also allowed for tuning of the Si bandgap [2]. &more..

Globe-LFMC 2.0, an enhanced and updated dataset for live fuel moisture content research

Globe-LFMC 2.0, an updated version of Globe-LFMC, is a comprehensive dataset of over 280,000 Live Fuel Moisture Content (LFMC) measurements. These measurements were gathered through field campaigns conducted in 15 countries spanning 47 years. In contrast to its prior version, Globe-LFMC 2.0 incorporates over 120,000 additional data entries, introduces more than 800 new sampling sites, and comprises LFMC values obtained from samples collected until the calendar year 2023. Each entry within the dataset provides essential information, including date, geographical coordinates, plant species, functional type, and, where available, topographical details. Moreover, the dataset encompasses insights into the sampling and weighing procedures, as well as information about land cover type and meteorological conditions at the time and location of each sampling event. Globe-LFMC 2.0 can facilitate advanced LFMC research, supporting studies on wildfire behaviour, physiological traits, ecological dynamics, and land surface modelling, whether remote sensing-based or otherwise. This dataset represents a valuable resource for researchers exploring the diverse LFMC aspects, contributing to the broader field of environmental and ecological research

Globe-LFMC 2.0, an enhanced and updated dataset for live fuel moisture content research

Globe-LFMC 2.0, an updated version of Globe-LFMC, is a comprehensive dataset of over 280,000 Live Fuel Moisture Content (LFMC) measurements. These measurements were gathered through feld campaigns conducted in 15 countries spanning 47 years. In contrast to its prior version, Globe-LFMC 2.0 incorporates over 120,000 additional data entries, introduces more than 800 new sampling sites, and comprises LFMC values obtained from samples collected until the calendar year 2023. Each entry within the dataset provides essential information, including date, geographical coordinates, plant species, functional type, and, where available, topographical details. Moreover, the dataset encompasses insights into the sampling and weighing procedures, as well as information about land cover type and meteorological conditions at the time and location of each sampling event. GlobeLFMC 2.0 can facilitate advanced LFMC research, supporting studies on wildfre behaviour, physiological traits, ecological dynamics, and land surface modelling, whether remote sensing-based or otherwise. This dataset represents a valuable resource for researchers exploring the diverse LFMC aspects, contributing to the broader feld of environmental and ecological research.info:eu-repo/semantics/publishedVersio

Globe-LFMC 2.0, an enhanced and updated dataset for live fuel moisture content research.

Globe-LFMC 2.0, an updated version of Globe-LFMC, is a comprehensive dataset of over 280,000 Live Fuel Moisture Content (LFMC) measurements. These measurements were gathered through field campaigns conducted in 15 countries spanning 47 years. In contrast to its prior version, Globe-LFMC 2.0 incorporates over 120,000 additional data entries, introduces more than 800 new sampling sites, and comprises LFMC values obtained from samples collected until the calendar year 2023. Each entry within the dataset provides essential information, including date, geographical coordinates, plant species, functional type, and, where available, topographical details. Moreover, the dataset encompasses insights into the sampling and weighing procedures, as well as information about land cover type and meteorological conditions at the time and location of each sampling event. Globe-LFMC 2.0 can facilitate advanced LFMC research, supporting studies on wildfire behaviour, physiological traits, ecological dynamics, and land surface modelling, whether remote sensing-based or otherwise. This dataset represents a valuable resource for researchers exploring the diverse LFMC aspects, contributing to the broader field of environmental and ecological research

ILC Reference Design Report Volume 1 - Executive Summary

The International Linear Collider (ILC) is a 200-500 GeV center-of-mass high-luminosity linear electron-positron collider, based on 1.3 GHz superconducting radio-frequency (SCRF) accelerating cavities. The ILC has a total footprint of about 31 km and is designed for a peak luminosity of 2x10^34 cm^-2s^-1. This report is the Executive Summary (Volume I) of the four volume Reference Design Report. It gives an overview of the physics at the ILC, the accelerator design and value estimate, the detector concepts, and the next steps towards project realization.The International Linear Collider (ILC) is a 200-500 GeV center-of-mass high-luminosity linear electron-positron collider, based on 1.3 GHz superconducting radio-frequency (SCRF) accelerating cavities. The ILC has a total footprint of about 31 km and is designed for a peak luminosity of 2x10^34 cm^-2s^-1. This report is the Executive Summary (Volume I) of the four volume Reference Design Report. It gives an overview of the physics at the ILC, the accelerator design and value estimate, the detector concepts, and the next steps towards project realization

ILC Reference Design Report Volume 4 - Detectors

This report, Volume IV of the International Linear Collider Reference Design Report, describes the detectors which will record and measure the charged and neutral particles produced in the ILC's high energy e+e- collisions. The physics of the ILC, and the environment of the machine-detector interface, pose new challenges for detector design. Several conceptual designs for the detector promise the needed performance, and ongoing detector R&D is addressing the outstanding technological issues. Two such detectors, operating in push-pull mode, perfectly instrument the ILC interaction region, and access the full potential of ILC physics.This report, Volume IV of the International Linear Collider Reference Design Report, describes the detectors which will record and measure the charged and neutral particles produced in the ILC's high energy e+e- collisions. The physics of the ILC, and the environment of the machine-detector interface, pose new challenges for detector design. Several conceptual designs for the detector promise the needed performance, and ongoing detector R&D is addressing the outstanding technological issues. Two such detectors, operating in push-pull mode, perfectly instrument the ILC interaction region, and access the full potential of ILC physics

ILC Reference Design Report Volume 3 - Accelerator

The International Linear Collider (ILC) is a 200-500 GeV center-of-mass high-luminosity linear electron-positron collider, based on 1.3 GHz superconducting radio-frequency (SCRF) accelerating cavities. The ILC has a total footprint of about 31 km and is designed for a peak luminosity of 2x10^34 cm^-2 s^-1. The complex includes a polarized electron source, an undulator-based positron source, two 6.7 km circumference damping rings, two-stage bunch compressors, two 11 km long main linacs and a 4.5 km long beam delivery system. This report is Volume III (Accelerator) of the four volume Reference Design Report, which describes the design and cost of the ILC.The International Linear Collider (ILC) is a 200-500 GeV center-of-mass high-luminosity linear electron-positron collider, based on 1.3 GHz superconducting radio-frequency (SCRF) accelerating cavities. The ILC has a total footprint of about 31 km and is designed for a peak luminosity of 2x10^34 cm^-2 s^-1. The complex includes a polarized electron source, an undulator-based positron source, two 6.7 km circumference damping rings, two-stage bunch compressors, two 11 km long main linacs and a 4.5 km long beam delivery system. This report is Volume III (Accelerator) of the four volume Reference Design Report, which describes the design and cost of the ILC