9,746 research outputs found
Evaluation of a metal shear web selectively reinforced with filamentary composites for space shuttle application. Phase 1 summary report: Shear web design development
An advanced composite shear web design concept was developed for the Space Shuttle orbiter main engine thrust beam structure. Various web concepts were synthesized by a computer-aided adaptive random search procedure. A practical concept is identified having a titanium-clad + or - 45 deg boron/epoxy web plate with vertical boron/epoxy reinforced aluminum stiffeners. The boron-epoxy laminate contributes to the strength and stiffness efficiency of the basic web section. The titanium-cladding functions to protect the polymeric laminate parts from damaging environments and is chem-milled to provide reinforcement in selected areas. Detailed design drawings are presented for both boron/epoxy reinforced and all-metal shear webs. The weight saving offered is 24% relative to all-metal construction at an attractive cost per pound of weight saved, based on the detailed designs. Small scale element tests substantiate the boron/epoxy reinforced design details in critical areas. The results show that the titanium-cladding reliably reinforces the web laminate in critical edge load transfer and stiffener fastener hole areas
Investigations of the lower and middle atmosphere at the Arecibo Observatory and a description of the new VHF radar project
The atmospheric science research at the Arecibo Observatory is performed by means of (active) radar methods and (passive) optical methods. The active methods utilize the 430 NHz radar, the S-band radar on 2380 MHz, and a recently constructed Very High Frequency (VHF) radar. The passive methods include measurements of the mesopause temperature by observing the rotational emissions from OH-bands. The VHF radar design is discussed
Method to determine the optimal parameters of the Arecibo 46.8-MHz antenna system
The spherical reflector at the Arecibo Observatory (AO) offers great advantages for the design of simple and inexpensive high performance steerable antennas at VHF. Light and small feeds have the added benefit that they can be quickly installed in the Arecibo platform. It is important to evaluate the performance of any given feed including the effects of the spherical reflector. The optimization is emphasized of two parameters, namely, the distance below the focal point of the reflector and the beam width of a point feed. For the design of the feed at 46.8 MHz at the AO there were other requirements independent of MST (mesosphere stratosphere troposphere) work. The design of the primary array is discussed along with its performance with the AO spherical reflector
Self-Regulation in a Web-Based Course: A Case Study
Little is known about how successful students in Web-based courses self-regulate their learning. This descriptive case study used a social cognitive model of self-regulated learning (SRL) to investigate how six graduate students used and adapted traditional SRL strategies to complete tasks and cope with challenges in a Web-based technology course; it also explored motivational and environmental influences on strategy use. Primary data sources were three transcribed interviews with each of the students over the course of the semester, a transcribed interview with the course instructor, and the students’ reflective journals. Archived course documents, including transcripts of threaded discussions and student Web pages, were secondary data sources. Content analysis of the data indicated that these students used many traditional SRL strategies, but they also adapted planning, organization, environmental structuring, help seeking, monitoring, record keeping, and self-reflection strategies in ways that were unique to the Web-based learning environment. The data also suggested that important motivational influences on SRL strategy use—self-efficacy, goal orientation, interest, and attributions—were shaped largely by student successes in managing the technical and social environment of the course. Important environmental influences on SRL strategy use included instructor support, peer support, and course design. Implications for online course instructors and designers, and suggestions for future research are offered
Helical Tubes in Crowded Environments
When placed in a crowded environment, a semi-flexible tube is forced to fold
so as to make a more compact shape. One compact shape that often arises in
nature is the tight helix, especially when the tube thickness is of comparable
size to the tube length. In this paper we use an excluded volume effect to
model the effects of crowding. This gives us a measure of compactness for
configurations of the tube, which we use to look at structures of the
semi-flexible tube that minimize the excluded volume. We focus most of our
attention on the helix and which helical geometries are most compact. We found
that helices of specific pitch to radius ratio 2.512 to be optimally compact.
This is the same geometry that minimizes the global curvature of the curve
defining the tube. We further investigate the effects of adding a bending
energy or multiple tubes to begin to explore the more complete space of
possible geometries a tube could form.Comment: 10 page
Failure mechanisms and surface roughness statistics of fractured Fontainebleau sandstone
In an effort to investigate the link between failure mechanisms and the
geometry of fractures of compacted grains materials, a detailed statistical
analysis of the surfaces of fractured Fontainebleau sandstones has been
achieved. The roughness of samples of different widths W is shown to be self
affine with an exponent zeta=0.46 +- 0.05 over a range of length scales ranging
from the grain size d up to an upper cut-off length \xi = 0.15 W. This low zeta
value is in agreement with measurements on other sandstones and on sintered
materials. The probability distributions P(delta z,delta h) of the variations
of height over different distances delta z > d can be collapsed onto a single
Gaussian distribution with a suitable normalisation and do not display
multifractal features. The roughness amplitude, as characterized by the
height-height correlation over fixed distances delta z, does not depend on the
sample width, implying that no anomalous scaling of the type reported for other
materials is present. It is suggested, in agreement with recent theoretical
work, to explain these results by the occurence of brittle fracture (instead of
damage failure in materials displaying a higher value of zeta = 0.8).Comment: 7 page
Comment on "X-ray resonant scattering studies of orbital and charge ordering in Pr1-xCaxMnO3"
In a recent published paper [Phys. Rev. B 64, 195133 (2001)], Zimmermann et
al. present a systematic x-ray scattering study of charge and orbital ordering
phenomena in the Pr1-xCaxMnO3 series with x= 0.25, 0.4 and 0.5. They propose
that for Ca concentrations x=0.4 and 0.5, the appearance of (0, k+1/2, 0)
reflections are originated by the orbital ordering of the eg electrons in the
a-b plane while the (0, 2k+1, 0) reflections are due to the charge ordering
among the Mn3+ and Mn4+ ions. Moreover, for small Ca concentrations (x<0.3),
the orbital ordering is only considered and it occurs at (0, k, 0) reflections.
A rigorous analysis of all these resonance reflections will show the inadequacy
of the charge-orbital model proposed to explain the experimental results. In
addition, this charge-orbital model is highly inconsistent with the electronic
balance. On the contrary, these reflections can be easily understood as arising
from the anisotropy of charge distribution induced by the presence of local
distortions, i.e. due to a structural phase transition.Comment: 10 pages, 2 figures.To be published Phys. Rev.
The variable radio-to-X-ray spectrum of the magnetar XTE J1810-197
We have observed the 5.54s anomalous X-ray pulsar XTE J1810-197 at radio,
millimeter, and infrared (IR) wavelengths, with the aim of learning about its
broad-band spectrum. At the IRAM 30m telescope, we have detected the magnetar
at 88 and 144GHz, the highest radio-frequency emission ever seen from a pulsar.
At 88GHz we detected numerous individual pulses, with typical widths ~2ms and
peak flux densities up to 45Jy. Together with nearly contemporaneous
observations with the Parkes, Nancay, and Green Bank telescopes, we find that
in late 2006 July the spectral index of the pulsar was -0.5<alpha<0 over the
range 1.4-144GHz. Nine dual-frequency Very Large Array and Australia Telescope
Compact Array observations in 2006 May-September are consistent with this
finding, while showing variability of alpha with time. We infer from the IRAM
observations that XTE J1810-197 remains highly linearly polarized at millimeter
wavelengths. Also, toward this pulsar, the transition frequency between strong
and weak scattering in the interstellar medium may be near 50GHz. At Gemini, we
detected the pulsar at 2.2um in 2006 September, at the faintest level yet
observed, K_s=21.89+-0.15. We have also analyzed four archival IR Very Large
Telescope observations (two unpublished), finding that the brightness
fluctuated within a factor of 2-3 over a span of 3 years, unlike the monotonic
decay of the X-ray flux. Thus, there is no correlation between IR and X-ray
flux, and it remains uncertain whether there is any correlation between IR and
radio flux.Comment: Accepted for publication in ApJ; contains improved discussion of
infrared uncertaintie
The cytoplasm of living cells: A functional mixture of thousands of components
Inside every living cell is the cytoplasm: a fluid mixture of thousands of
different macromolecules, predominantly proteins. This mixture is where most of
the biochemistry occurs that enables living cells to function, and it is
perhaps the most complex liquid on earth. Here we take an inventory of what is
actually in this mixture. Recent genome-sequencing work has given us for the
first time at least some information on all of these thousands of components.
Having done so we consider two physical phenomena in the cytoplasm: diffusion
and possible phase separation. Diffusion is slower in the highly crowded
cytoplasm than in dilute solution. Reasonable estimates of this slowdown can be
obtained and their consequences explored, for example, monomer-dimer equilibria
are established approximately twenty times slower than in a dilute solution.
Phase separation in all except exceptional cells appears not to be a problem,
despite the high density and so strong protein-protein interactions present. We
suggest that this may be partially a byproduct of the evolution of other
properties, and partially a result of the huge number of components present.Comment: 11 pages, 1 figure, 1 tabl
Designing novel applications for emerging multimedia technology
Current R&D in media technologies such as Multimedia, Semantic Web and Sensor Web technologies are advancing in a fierce rate and will sure to become part of our important regular items in a 'conventional' technology inventory in near future. While the R&D nature of these technologies means their accuracy, reliability and robustness are not sufficient enough to be used in real world yet, we want to envision now the near-future where these technologies will have matured and used in real applications in order to explore and start shaping many possible new ways these novel technologies could be utilised.
In this talk, some of this effort in designing novel applications that incorporate various media technologies as their backend will be presented. Examples include novel scenarios of LifeLogging application that incorporate automatic structuring of millions of photos passively captured from a SenseCam (wearable digital camera that automatically takes photos triggered by environmental sensors) and an interactive TV application incorporating a number of multimedia tools yet extremely simple and easy to use with a remote control in a lean-back position. The talk will conclude with remarks on how the design of novel applications that have no precedence or existing user base should require somewhat different approach from those suggested and practiced in conventional usability engineering methodology
- …