11,242 research outputs found
Wind loads on flat plate photovoltaic array fields (nonsteady winds)
Techniques to predict the dynamic response and the structural dynamic loads of flat plate photovoltaic arrays due to wind turbulence were analyzed. Guidelines for use in predicting the turbulent portion of the wind loading on future similar arrays are presented. The dynamic response and the loads dynamic magnification factor of the two array configurations are similar. The magnification factors at a mid chord and outer chord location on the array illustrated and at four points on the chord are shown. The wind tunnel test experimental rms pressure coefficient on which magnification factors are based is shown. It is found that the largest response and dynamic magnification factor occur at a mid chord location on an array and near the trailing edge. A technique employing these magnification factors and the wind tunnel test rms fluctuating pressure coefficients to calculate design pressure loads due to wind turbulence is presented
Evaluation of a metal shear web selectively reinforced with filamentary composites for space shuttle application. Phase 1 summary report: Shear web design development
An advanced composite shear web design concept was developed for the Space Shuttle orbiter main engine thrust beam structure. Various web concepts were synthesized by a computer-aided adaptive random search procedure. A practical concept is identified having a titanium-clad + or - 45 deg boron/epoxy web plate with vertical boron/epoxy reinforced aluminum stiffeners. The boron-epoxy laminate contributes to the strength and stiffness efficiency of the basic web section. The titanium-cladding functions to protect the polymeric laminate parts from damaging environments and is chem-milled to provide reinforcement in selected areas. Detailed design drawings are presented for both boron/epoxy reinforced and all-metal shear webs. The weight saving offered is 24% relative to all-metal construction at an attractive cost per pound of weight saved, based on the detailed designs. Small scale element tests substantiate the boron/epoxy reinforced design details in critical areas. The results show that the titanium-cladding reliably reinforces the web laminate in critical edge load transfer and stiffener fastener hole areas
Comparison of Hydrolyzed Intestinal By-products
Pigs were weaned at 16 to 20 days of age and fed diets containing either dried whey, dried porcine solubles (DPS), or condensed porcine solubles (CPS) for 3 weeks, followed by a common diet for 2 weeks. The results of the trial showed that 5% of either DPS or CPS can replace dried whey protein in diets for weanling with no effect on growth performance up to 5 weeks after weanin
Dried Porcine Solubles and Feed Additives
Pigs were weaned at 16 to 20 days of age and fed diets containing either dried whey or 6% dried porcine solubles (DPS), partially replacing dried whey protein, and one of two combinations of feed additives (either ZnO + CSP 250 or CuSO4 + Mecadox) in a 2 Ă— 2 factorial arrangement. The diets were fed for 2 weeks and followed by a common diet for 3 weeks. Feeding the DPS-containing diet during week 1 and 2 post-weaning improved average daily gain in week 3 after weaning (when no DPS was fed), as well as cumulative average daily gain in weeks 0 to 3. However, it tended to lessen feed utilization in week 4 and 5. Furthermore, it was shown that the combination of ZnO and CSP 250 improved growth performance over CuSO4 and Mecadox in weanlingpig diets. Neither feed-additive combination influenced the utilization of DPS
Wind loads on flat plate photovoltaic array fields
The results of an experimental analysis (boundary layer wind tunnel test) of the aerodynamic forces resulting from winds acting on flat plate photovoltaic arrays are presented. Local pressure coefficient distributions and normal force coefficients on the arrays are shown and compared to theoretical results. Parameters that were varied when determining the aerodynamic forces included tilt angle, array separation, ground clearance, protective wind barriers, and the effect of the wind velocity profile. Recommended design wind forces and pressures are presented, which envelop the test results for winds perpendicular to the array's longitudinal axis. This wind direction produces the maximum wind loads on the arrays except at the array edge where oblique winds produce larger edge pressure loads. The arrays located at the outer boundary of an array field have a protective influence on the interior arrays of the field. A significant decrease of the array wind loads were recorded in the wind tunnel test on array panels located behind a fence and/or interior to the array field compared to the arrays on the boundary and unprotected from the wind. The magnitude of this decrease was the same whether caused by a fence or upwind arrays
Self-Regulation in a Web-Based Course: A Case Study
Little is known about how successful students in Web-based courses self-regulate their learning. This descriptive case study used a social cognitive model of self-regulated learning (SRL) to investigate how six graduate students used and adapted traditional SRL strategies to complete tasks and cope with challenges in a Web-based technology course; it also explored motivational and environmental influences on strategy use. Primary data sources were three transcribed interviews with each of the students over the course of the semester, a transcribed interview with the course instructor, and the students’ reflective journals. Archived course documents, including transcripts of threaded discussions and student Web pages, were secondary data sources. Content analysis of the data indicated that these students used many traditional SRL strategies, but they also adapted planning, organization, environmental structuring, help seeking, monitoring, record keeping, and self-reflection strategies in ways that were unique to the Web-based learning environment. The data also suggested that important motivational influences on SRL strategy use—self-efficacy, goal orientation, interest, and attributions—were shaped largely by student successes in managing the technical and social environment of the course. Important environmental influences on SRL strategy use included instructor support, peer support, and course design. Implications for online course instructors and designers, and suggestions for future research are offered
Advances in Nonlinear Matched Filtering
Symmetric nonlinear matched filters (SNMF’s) involve the transformation of the signal spectrum and the filter transfer function through pointwise nonlinearities before they are multiplied in the transform domain. The resulting system is analogous to a 3-layer neural net The experimental and theoretical results discussed indicate that SNMF’s hold considerable potential to achieve high-power of discrimination, resolution and large SNR. The statistical analysis of a particular SNMF in the 2-class problem indicates that the performance coefficient of the SNMF is about four times larger than the performance coefficient of the classical matched filter. In terms of resolving closeby signals, there seems to be no limit to die achievable resolution. However, intermodulation noise has to be carefully monitored
Comparison of measured and calculated dynamic loads for the Mod-2 2.5 mW wind turbine system
The Boeing Company, under contract to the Electric Power Research Institute (EPRI), has completed a test program on the Mod-2 wind turbines at Goodnoe Hills, Washington. The objectives were to update fatigue load spectra, discern site and machine differences, measure vortex generator effects, and to evaluate rotational sampling techniques. This paper shows the test setup and loads instrumentation, loads data comparisons and test/analysis correlations. Test data are correlated with DYLOSAT predictions using both the NASA interim turbulence model and rotationally sampled winds as inputs. The latter is demonstrated to have the potential to improve the test/analysis correlations. The paper concludes with an assessment of the importance of vortex generators, site dependence, and machine differences on fatigue loads. The adequacy of prediction techniques used are evaluated and recommendations are made for improvements to the methodology
- …