THE JUDICIAL PROTECTION OF COPYRIGHT ON THE INTERNET IN THE PEOPLE’S REPUBLIC OF CHINA

The legal system for copyright protection on the Internet has been established for years, although the Regulation on the Protection of the Right of Communication through Information Networks (Communication Right Regulation) was only issued in 2006. 1 Since the late 1990s we have gained approximately ten years experience in dealing with cases involving Internet intellectual property disputes. In this chapter, I would like to briefly introduce and then discuss the development of judicial protection for Internet digital copyright in China

Stability and Hopf Bifurcation Analysis on a Nonlinear Business Cycle Model

This study begins with the establishment of a three-dimension business cycle model based on the condition of a fixed exchange rate. Using the established model, the reported study proceeds to describe and discuss the existence of the equilibrium and stability of the economic system near the equilibrium point as a function of the speed of market regulation and the degree of capital liquidity and a stable region is defined. In addition, the condition of Hopf bifurcation is discussed and the stability of a periodic solution, which is generated by the Hopf bifurcation and the direction of the Hopf bifurcation, is provided. Finally, a numerical simulation is provided to confirm the theoretical results. This study plays an important role in theoretical understanding of business cycle models and it is crucial for decision makers in formulating macroeconomic policies as detailed in the conclusions of this report

Measuring Efficiency of Public Higher Education Using DEA Model for Sichuan in China

This study uses Data Envelopment Analysis (DEA) and the Malmquist method to investigate efficiency in Sichuan Province’s public undergraduate universities by employing a dynamic unbalanced panel data approach and Refining input-output indicators through the application of the Factorial Component Analysis (FCA) method. We find average comprehensive efficiency (0.6601), pure technical efficiency (0.8562), scale efficiency (0.7723), and total factor productivity progress (0.932) for 27 institutions from 2018 to 2022. Despite the increased investment, efficiency gains are modest. Hierarchical correlation with input-output efficiency is noted, and total factor productivity shows an upward trend influenced by financial resources and economies of scale. These findings provide insights for university administrators and policymakers to address inefficiencies and optimize education resources for sustainable development

Optical modulators with 2D layered materials

Light modulation is an essential operation in photonics and optoelectronics. With existing and emerging technologies increasingly demanding compact, efficient, fast and broadband optical modulators, high-performance light modulation solutions are becoming indispensable. The recent realization that 2D layered materials could modulate light with superior performance has prompted intense research and significant advances, paving the way for realistic applications. In this Review, we cover the state of the art of optical modulators based on 2D materials, including graphene, transition metal dichalcogenides and black phosphorus. We discuss recent advances employing hybrid structures, such as 2D heterostructures, plasmonic structures, and silicon and fibre integrated structures. We also take a look at the future perspectives and discuss the potential of yet relatively unexplored mechanisms, such as magneto-optic and acousto-optic modulation

Thin film microextraction

This thesis developed thin film extraction technique, which is a solid phase microextraction (SPME) technique with enhanced sensitivity, without sacrificing analysis time due to the large surface area-to-volume ratio of thin film. Thin film extraction was applied for both spot sampling and time weighted average (TWA) sampling in laboratory and on site. First, an electric drill coupled with a SPME polydimethylsiloxane (PDMS) fiber or a PDMS thin film was used for active spot sampling of polycyclic aromatic hydrocarbons (PAHs) in aqueous samples. Laboratory experiments demonstrated that the sampling rates of fiber and thin film can be predicted theoretically. The performance of a PDMS-coated stir bar at a constant stirring speed was also investigated. Compared with the fiber or the stir bar, the thin film sampler exhibited a higher sampling rate and much better sensitivity due to its higher surface-to-volume ratio and its larger extraction-phase volume. A new thin film active sampler was developed; field tests illustrated that it was excellent for rapid on-site water sampling due to its short sampling period, high sampling efficiency and durability. Second, modeling was applied to study the kinetics of fiber SPME and thin film extraction by COMSOL Multiphysics. The symmetry of absorption of analyte onto the fiber (or thin film) and desorption of calibrant from the fiber in static aqueous solution and a flow through system, was demonstrated by modeling. Furthermore, kinetic calibration method was illustrated to be feasible for fiber SPME in complex aqueous matrix and then was used to calculate the total concentration of analyte in the system. Third, thin film extraction was used in on-site sampling in Hamilton Harbour and for the determination of TWA concentrations of PAHs based on the kinetic calibration. When the thin film sampler, a fiber-retracted SPME field water sampler, and a SPME rod were used simultaneously, the thin film sampler exhibited the highest sampling rate compared to the other water samplers, due to its large surface-to-volume ratio. Fourth, partition equilibriums and extraction rates of PAHs were examined for live biomonitoring with black worms and for the PDMS thin-film in passive sampling mode. In the initial extraction stage, the extracted amounts per surface area by two samplers were similar indicating that thin-film samplers could mimic the behavior of black worms for passive monitoring. A good linear relationship between bioconcentration factors and film-water partition coefficients of PAHs demonstrated the feasibility of thin-film sampler for determining the bioavailability of PAHs in water. Finally, thin film extraction was used for the analysis of human skin and breath under different experimental conditions. Thin film technique could study several skin areas of one person, characterize the skins of different persons, and measure volatile fractions of cosmetic products that were released from the skin. The sampling time in the breath analysis could be further reduced to only 20 seconds when the thin film was rotated with a portable drill

Stabilization via delay feedback for highly nonlinear stochastic time-varying delay systems with Markovian switching and Poisson jump

Little work seems to be known about stabilization results of highly nonlinear stochastic time-varying delay systems (STVDSs) with Markovian switching and Poisson jump. This paper is concerned with the stabilization problem for a class of STVDSs with Markovian switching and Poisson jump. The coefficients of such systems do not satisfy the conventional linear growth conditions, but are subject to high nonlinearity. The aim of this paper is to design a delay feedback controller to make an unstable highly nonlinear STVDSs with Markovian switching and Poisson jump H∞-stable and asymptotically stable. Besides, an illustrative example is provided to support the theoretical results

Nano-carbon black and carbon fiber as conductive materials for the diagnosing of the damage of concrete beam

Author's personal copyThe nano-carbon black (NCB) and carbon fiber (CF) as electric conductive materials were added into the concrete. The effect of the NCB and CF on the mechanical properties and on the fractional change in resistance (FCR) of concrete was investigated. The relationships among the FCR, the strain of initial geometrical neutral axis (IGNA) and the beam damage degree were developed. The results showed that the relationship between the FCR and IGNA strain can be described by the First Order Exponential Decay function, and the internal damage of concrete beam was reflected by the relationship between damage degree and resistance.The authors acknowledge the National Natural Science Foundation of China (Grant: 50278013), the National Natural Science Foundation of China (Grant: 51121005), State Key Laboratory of Coastal and Offshore Engineering, DUT and Fundacao para a Ciencia e a Tecnologia (SFRH/BPD/22680/2005), the FEDER Funds through "Programa Operacional Factores de Competitividade - COMPETE" and by Portuguese Funds through FCT - within the Projects PEst-CMAT/UI0013/2011 and PTDC/MAT/112273/2009

Evanescent-wave coupled right angled buried waveguide: Applications in carbon nanotube mode-locking

In this paper we present a simple but powerful subgraph sampling primitive that is applicable in a variety of computational models including dynamic graph streams (where the input graph is defined by a sequence of edge/hyperedge insertions and deletions) and distributed systems such as MapReduce. In the case of dynamic graph streams, we use this primitive to prove the following results: -- Matching: First, there exists an $\tilde{O}(k^2)$ space algorithm that returns an exact maximum matching on the assumption the cardinality is at most $k$. The best previous algorithm used $\tilde{O}(kn)$ space where $n$ is the number of vertices in the graph and we prove our result is optimal up to logarithmic factors. Our algorithm has $\tilde{O}(1)$ update time. Second, there exists an $\tilde{O}(n^2/\alpha^3)$ space algorithm that returns an $\alpha$-approximation for matchings of arbitrary size. (Assadi et al. (2015) showed that this was optimal and independently and concurrently established the same upper bound.) We generalize both results for weighted matching. Third, there exists an $\tilde{O}(n^{4/5})$ space algorithm that returns a constant approximation in graphs with bounded arboricity. -- Vertex Cover and Hitting Set: There exists an $\tilde{O}(k^d)$ space algorithm that solves the minimum hitting set problem where $d$ is the cardinality of the input sets and $k$ is an upper bound on the size of the minimum hitting set. We prove this is optimal up to logarithmic factors. Our algorithm has $\tilde{O}(1)$ update time. The case $d=2$ corresponds to minimum vertex cover. Finally, we consider a larger family of parameterized problems (including $b$-matching, disjoint paths, vertex coloring among others) for which our subgraph sampling primitive yields fast, small-space dynamic graph stream algorithms. We then show lower bounds for natural problems outside this family