Neuron-oligodendrocyte myelination co-culture derived from embryonic rat spinal cord and cerebral cortex

An in vitro myelination model derived from rat central nervous system (CNS) remains to be established. Here, we describe a simple and reproducible myelination culture method using dissociated neuron-oligodendrocyte (OL) co-cultures from either the embryonic day 16 (E16) rat spinal cord or cerebral cortex. The dissociated cells are plated directly on poly-L-lysine-coated cover slips and maintained in a modified myelination medium that supports both OL and neuron differentiation. The spinal cord derived OL progenitor cells develop quickly into myelin basic protein (MBP)+ mature OLs and start to myelinate axons around 17 days in vitro (DIV17). Myelination reaches its peak around six weeks (DIV40) and the typical nodes of Ranvier are revealed by paranodal proteins Caspr and juxaparanodal protein Kv1.2 immunoreactivity. Electron microscopy (EM) shows typical myelination cytoarchitecture and synaptic organization. In contrast, the cortical-derived co-culture requires triiodothyronine (T3) in the culture medium for myelination. Finally, either hypomyelination and/or demyelination can be induced by exposing proinflammatory cytokines or demyelinating agents to the co-culture, suggesting the feasibility of this modified in vitro myelination model for myelin-deficit investigation

Genome Composition and Divergence of the Novel Coronavirus (2019-nCoV) Originating in China.

An in-depth annotation of the newly discovered coronavirus (2019-nCoV) genome has revealed differences between 2019-nCoV and severe acute respiratory syndrome (SARS) or SARS-like coronaviruses. A systematic comparison identified 380 amino acid substitutions between these coronaviruses, which may have caused functional and pathogenic divergence of 2019-nCoV

A CRISPR-Cas12a—Based platform for ultrasensitive, rapid, and highly specific detection of Mycoplasma pneumonia in clinical application

Mycoplasma pneumoniae (MP), which is responsible for a majority of community-acquired pneumonia (CAP) in children, has been largely underestimated. Here, we coupled multiple cross displacement amplification (MCDA) technique with CRISPR-Cas12a-based biosensing system to design a novel detection platform termed MP-MCDA-CRISPR assay for MP infection diagnosis and clinical application. The MP-MCDA-CRISPR assay amplified the CARDS gene of MP by MCDA method, followed by trans-cleavage of the reporter molecular upon the formation of CRISPR-Cas12a-gRNA-target DNA complex, which was confirmed by the release of fluorescent signals. A set of standard MCDA primers, an engineered CP1 primer, a quenched fluorescent ssDNA reporter, and a gRNA were designed targeting the CARDS gene of MP. The optimal temperature for MCDA pre-amplification is 64°C, and the time for CRISPR-Cas12a-gRNA biosensing process is 5 min. The limit of detection (LoD) of the MP-MCDA-CRISPR assay is 50 fg per reaction without any cross-reaction with other non-MP pathogens. The MP-MCDA-CRISPR assay accurately identified the 50 real time-PCR positive clinical samples and 78 negative ones. Taken together, the MP-MCDA-CRISPR assay designed here is a promising diagnostic tool for point-of care (POC) testing of MP infection

Synthesis of Cyclic Fragrances via Transformations of Alkenes, Alkynes and Enynes: Strategies and Recent Progress

With increasing demand for customized commodities and the greater insight and understanding of olfaction, the synthesis of fragrances with diverse structures and odor characters has become a core task. Recent progress in organic synthesis and catalysis enables the rapid construction of carbocycles and heterocycles from readily available unsaturated molecular building blocks, with increased selectivity, atom economy, sustainability and product diversity. In this review, synthetic methods for creating cyclic fragrances, including both natural and synthetic ones, will be discussed, with a focus on the key transformations of alkenes, alkynes, dienes and enynes. Several strategies will be discussed, including cycloaddition, catalytic cyclization, ring-closing metathesis, intramolecular addition, and rearrangement reactions. Representative examples and the featured olfactory investigations will be highlighted, along with some perspectives on future developments in this area

Investigations of strength and energy absorption of clinched joints

With an increasing application of clinching in different industrial fields, the demand for a better understanding of the knowledge of static and dynamic characteristics of the clinched joints is required. In this paper, the clinching process and tensile-shear failure of the clinched joints have been numerically simulated using finite element (FE) method. For validating the numerical simulations, experimental tests on specimens made of aluminium alloy have been carried out. The results obtained from tests agreed fairly well with the computational simulation. Tensile-shear tests were carried out to measure the ultimate tensile-shear strengths of the clinching joints and clinching-bonded hybrid joints. Deformation and failure of joints under tensile-shear loading were studied. The normal hypothesis tests were performed to examine the rationality of the test data. This work was also aimed at evaluating experimentally and comparing the strength and energy absorption of the clinched joints and clinching-bonded hybrid joints

Adsorption isotherm, kinetics simulation and breakthrough analysis of 5-hydroxymethylfurfural adsorption/desorption behavior of a novel polar-modified post-cross-linked poly (divinylbenzene-co-ethyleneglycoldimethacrylate) resin

A polar modified post-cross-linked poly (divinylbenzene-co-ethyleneglycol-dimethacrylate) (PCL-PDE) resin was synthesized by suspension polymerization of ethylene glycol dimethacrylate (EGDMA) and divinylbenzene (DVB), and a post-cross-linked reaction. After characterization, the adsorption behaviors of 5-hydroxymethylfurfural (5-HMF) on PCL-PDE resin were determined in comparison with the starting copolymers PDE resin. The equilibrium adsorption capacity of 5-HMF on PCL-PDE resin was much larger than PDE resin and the increase rate was greater than 52.6%. The equilibrium data of 5-HMF onto PCLPDE resin were found to be better fitted by the Langmuir isotherm model. The kinetic data shows that the adsorption reached equilibrium in a short time (less than 20 min) can be fitted by the pore diffusion model (PDM) at various operating conditions. The effective pore diffusion coefficient was dependent upon adsorption temperature, and were 6.706 x 10(-10), 8.958 x 10(-10), 1.136 x 10(-9) and 1.429 x 10(-9) m(2) s(-1) at 288, 298, 308 and 318 K, respectively. Furthermore, the effects of feed flow rate (Qf= 0.6,1.5, 3.0 and 6.0 mL min(-1)) and initial 5-HMF concentration (cf= 0.52, 1.02, 2.00 and 4.96 g L-1) on the adsorption were investigated systematically. Besides, a general rate model (GRM) was used to predict adsorption breakthrough curves of 5-HMF. The simulation results are highly consistent with the experimental data, indicating that the GRM can successfully simulate this process. In the desorption process, the desorption capacity reaches 99.6% of adsorbed capacity, suggesting that the PCL-PDE resin exhibited good reusability. Therefore, it could be suggested that the PCL-PDE resin has a potential application in the separation and purification of 5-HMF. (C) 2019 Elsevier Ltd. All rights reserved

Sisal-Fiber-Reinforced Polypropylene Flame-Retardant Composites: Preparation and Properties

Natural-fiber-reinforced polypropylene (PP) composites with a series of advantages including light weight, chemical durability, renewable resources, low in cost, etc., are being widely used in many fields such as the automotive industry, packaging, and construction. However, the flammability of plant fiber and the PP matrix restricts the application range, security, and use of these composites. Therefore, it is of great significance to study the flame retardants of such composites. In this paper, sisal-fiber-reinforced polypropylene (PP/SF) flame-retardant composites were prepared using the two-step melt blending method. The flame retardant used was an intumescent flame retardant (IFR) composed of silane-coated ammonium polyphosphate (Si-APP) and pentaerythritol (PER). The influence of different blending processes on the flammability and mechanical properties of the composites was analyzed. The findings suggested that PP/SF flame-retardant composites prepared via different blending processes showed different flame-retardant properties. The (PP/SF)/IFR composite prepared by PP/SF secondary blending with IFR showed excellent flame-retardant performance, with a limited oxygen index of about 28.3% and passing the UL-94 V-0 rating (3.2 mm) in the vertical combustion test. Compared with the (PP/IFR) /SF composite prepared by a matrix primarily blended with IFR and then secondly blended with SF, the peak heat release rate (pk HRR) and total heat release (THR) of the (PP/SF)/IFR composite decreased by 11.3% and 13.7%, respectively. In contrast, the tensile strength of the (PP/SF)/IFR system was 5.3% lower than that of the (PP/IFR)/SF system; however, the overall mechanical (tensile, flexural, and notched impact) properties of the composites prepared using three different mixing processes were similar

Reliability and validity of the Chinese version of the biological rhythms interview of assessment in neuropsychiatry in patients with major depressive disorder

Abstract Background Although disturbances in biological rhythms are closely related to the onset of major depressive disorder (MDD), they are not commonly assessed in Chinese clinical practice. The Biological Rhythms Interview of Assessment in Neuropsychiatry (BRIAN) has been used to evaluate disturbances in biological rhythms in MDD. We aimed to assess and confirm the reliability and validity of the Chinese version of the BRIAN (C-BRIAN) in patients with MDD. Methods A total of 120 patients with MDD and 40 age- and sex-matched controls were recruited consecutively. Reliability was estimated using Cronbach’s alpha, the split-half coefficient, and the test-retest coefficient; test-retest reliability was assessed using Spearman’s correlation coefficient. A confirmatory factor analysis was used to determine the construct validity of the scale. The Pittsburgh Sleep Quality Index (PSQI) and the Morningness-Eveningness Questionnaire (MEQ) were used to check concurrent validity by evaluating the correlation between the C-BRIAN, PSQI, and MEQ. Results The overall Cronbach’s α value was 0.898, indicating good internal consistency. The Guttman split-half coefficient was 0.792, indicating good split-half reliability. Moreover, the test-retest reliability for both the total and individual item score was excellent. Confirmatory factor analysis revealed that construct validity was acceptable (χ2/df = 2.117, GFI = 0.80, AGFI = 0.87, CFI = 0.848, and RMSEA = 0.097). Furthermore, total BRIAN scores were found to be negatively correlated with MEQ (r = − 0.517, P < 0.001) and positively correlated with PSQI (r = 0.586, P < 0.001). In addition, patients with MDD had higher BRIAN scores than those in controls. Conclusions This study revealed that the C-BRIAN scale has great validity and reliability in evaluating the disturbance of biological rhythms in patients with MDD

Protective Role of L-3-n-Butylphthalide in Cognitive Function and Dysthymic Disorders in Mouse With Chronic Epilepsy

Epilepsy is a common neurological disease with recurrent seizures and neurobehavioral comorbidities, including cognitive impairment and psychiatric disorders. Recent studies suggest that L-3-n-butylphthalide (NBP), an extract from the seeds of Apium graveolens Linn. (Chinese celery), ameliorates cognitive dysfunction in ischemia and/or Alzheimer’s disease animal models. However, little is known about the role of NBP in epilepsy and the associated comorbidities. Here, using a pilocarpine-induced chronic epileptic mouse model, we found that NBP supplement not only alleviated seizure severity and abnormal electroencephalogram, but also rescued cognitive and emotional impairments in these epileptic mice. The possible underlying mechanisms may be associated with the protective role of NBP in reducing neuronal loss and in restoring the expression of neural synaptic proteins such as postsynaptic density protein 95 (PSD95) and glutamic acid decarboxylase 65/67 (GAD65/67). In addition, NBP treatment increased the transcription of neuroprotective factors, brain-derived neurotrophic factor and Klotho. These findings suggest that NBP treatment may be a potential strategy for ameliorating epileptogenesis and the comorbidities of cognitive and psychological impairments