Enhanced cell adhesion and proliferation on dual plasma modified titanium surfaces

Session: Biomaterials Fabrication and Synthesis: abstract no. 47INTRODUCTION: Ti-6Al-4V is widely used in present orthopedic applications, owing to a combination of good mechanical properties and excellent corrosion resistance. However, long-term success of Ti-6Al-4V implants and the completeness of their osteointegration still need to be addressed [1]. Since the biofunctionality of the implant is strongly affected by its surface characteristics, to promote osteointegration, considerable efforts have focused on modifying the surface of the implants. Alternatively, surface modification using plasma immersion ion implantation (PIII) has been developed in order to incorporate new biofunctional groups onto titanium alloy surfaces [2]. The present study aims at investigating the impact of carbon-nitrogen (Car-Nit) dual plasma surface treatment on …postprintThe 2010 North America Conference of the Tissue Engineering and Regenerative Medicine International Society (TERMIS-NA 2010), Orlando, FL., 5-8 December 2010

Optical characteristics of GAN/SI micro-pixel light-emitting diode arrays

Two-dimensional arrays of emissive micro-light-emitting diodes (μ-LEDS) have been developed for a variety of applications such as high resolution micro-displays, maskless photo-lithography and multichannel visible-light optical communications amongst others. μ-LEDs have traditionally been fabricated on InGaN LED wafers grown on transparent sapphire substrates, and have suffered from optical crosstalk issues. When a single pixel is addressed, adjacent pixels and regions appear illuminated simultaneously. Such problems could result in functional failure in high-density μ-LED applications, including reduced resolution of micro-display and decreased signal-to-noise ratio in ...postprin

Determination of AGC capacity requirement and regulation strategies considering penalties of tie-line power flow deviations

2003-2004 > Academic research: refereed > Publication in refereed journalVersion of RecordPublishe

Low-temperature microstructural studies on superconducting CaFe2As2.

Undoped CaFe2As2 (Ca122) can be stabilized in two slightly different non-superconducting tetragonal phases, PI and PII, through thermal treatments. Upon proper annealing, superconductivity with a Tc up to 25 K emerges in the samples with an admixture of PI and PII phases. Systematic low-temperature X-ray diffraction studies were conducted on undoped Ca122 samples annealed at 350 °C over different time periods. In addition to the diffraction peaks associated with the single-phase aggregation of PI and PII, a broad intermediate peak that shifts with annealing time was observed in the superconducting samples only. Our simulation of phase distribution suggests that the extra peak is associated with the admixture of PI and PII on the nanometer scale. High-resolution transmission electron microscopy confirms the existence of these nano-scale phase admixtures in the superconducting samples. These experimental results and simulation analyses lend further support for our conclusion that interfacial inducement is the most reasonable explanation for the emergence of superconductivity in undoped Ca122 single crystals

Studies on critical issues related to operating reserves in deregulated electricity market environment

2002-2003 > Academic research: refereed > Publication in refereed journalVersion of RecordPublishe

The Search for Higher TcT_c in Houston

It is a great pleasure to be invited to join the chorus on this auspicious occasion to celebrate Professor K. Alex Mueller's 90th birthday by Professors Annette Bussman-Holder, Hugo Keller, and Antonio Bianconi. As a student in high temperature superconductivity, I am forever grateful to Professor Alex Mueller and Dr. Georg Bednorz "for their important breakthrough in the discovery of superconductivity in the ceramic materials" in 1986 as described in the citation of their 1987 Nobel Prize in Physics. It is this breakthrough discovery that has ushered in the explosion of research activities in high temperature superconductivity (HTS) and has provided immense excitement in HTS science and technology in the ensuing decades till now. Alex has not been resting on his laurels and has continued to search for the origin of the unusual high temperature superconductivity in cuprates.Comment: Dedicated to Alex Mueller, whose "important breakthrough in the discovery of superconductivity in ceramic materials" in 1986 has changed the world of superconductivit

A hydrostatic pressure-driven passive micropump enhanced with siphon-based autofill function.

Autonomous and self-powered micropumps are in critical demand for versatile cell- and tissue-based applications as well as for low-cost point-of-care testing (POCT) in microfluidics fields. The hydrostatic pressure-driven passive micropumps are simple and widely used, but they cannot maintain steady and continuous flow for long periods of time. Here, we propose a hydrostatic pressure-driven passive micropump enhanced with siphon-based autofill function, which can realize the autonomous and continuous perfusion with well-controlled steady flow over an extended time without electric power consumption. The characterization results reveal that both the cycle number in one refilling loop and the siphon diameter will affect the refilling time. Furthermore, this micropump also enables multiplexed medium delivery under either the same or different flow conditions with high flexibility. The system was validated using an in vitro vasculogenesis model over the course of several days. Most importantly, the device can consistently provide steady medium perfusion for up to 5 days at a predefined hydrostatic pressure drop without the need for supplemental medium changes. We believe that this hydrostatic pressure-driven passive micropump will become a critical module for a broad range of sophisticated microfluidic operations and applications

Structural reliability analysis of multiple limit state functions using multi-input multi-output support vector machine

Selecting and using an appropriate structural reliability method is critical for the success of structural reliability analysis and reliability-based design optimization. However, most of existing structural reliability methods are developed and designed for a single limit state function and few methods can be used to simultaneously handle multiple limit state functions in a structural system when the failure probability of each limit state function is of interest, for example, in a reliability-based design optimization loop. This article presents a new method for structural reliability analysis with multiple limit state functions using support vector machine technique. A sole support vector machine surrogate model for all limit state functions is constructed by a multi-input multi-output support vector machine algorithm. Furthermore, this multi-input multi-output support vector machine surrogate model for all limit state functions is only trained from one data set with one calculation process, instead of constructing a series of standard support vector machine models which has one output only. Combining the multi-input multi-output support vector machine surrogate model with direct Monte Carlo simulation, the failure probability of the structural system as well as the failure probability of each limit state function corresponding to a failure mode in the structural system can be estimated. Two examples are used to demonstrate the accuracy and efficiency of the presented method

Mode Change of a Gamma-Ray Pulsar, PSR J2021+4026

postprin

Structural variability, coordination and adaptation of a native photosynthetic machinery

Cyanobacterial thylakoid membranes represent the active sites for both photosynthetic and respiratory electron transport. We used high-resolution atomic force microscopy to visualize the native organization and interactions of photosynthetic complexes within the thylakoid membranes from the model cyanobacterium Synechococcus elongatus PCC 7942. The thylakoid membranes are heterogeneous and assemble photosynthetic complexes into functional domains to enhance their coordination and regulation. Under high light, the chlorophyll-binding proteins IsiA are strongly expressed and associate with Photosystem I (PSI), forming highly variable IsiA-PSI supercomplexes to increase the absorption cross-section of PSI. There are also tight interactions of PSI with Photosystem II (PSII), cytochrome b6f, ATP synthase and NAD(P)H dehydrogenase complexes. The organizational variability of these photosynthetic supercomplexes permits efficient linear and cyclic electron transport as well as bioenergetic regulation. Understanding the organizational landscape and environmental adaptation of cyanobacterial thylakoid membranes may help inform strategies for engineering efficient photosynthetic systems and photo-biofactories